• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.679-681
• /
• 2021

본 연구애서는 노후된 태양광 발전 설비를 진단하기 위한 센서 노드와 RTU (remote terminal unit) 사이의 통신 프로토콜을 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.89-91
• /
• 2008

The photovoltaic industry is growing at a tremendous speed. And it can be one of the key factors for success in the photovoltaic business to choose a suitable system, and setting it up right so as to get a maximum efficiency of the site. Therefore, it is regarded to be necessary to research the efficiency of systems to catch maximum photovoltaic energy. In this research, the expected power generation efficiencies are analysed, and compared with each other. This research considered the direct sunlight only, and the angle between the direction of solar panel and sunlight as factors to affect the power generation. Therefore, only rough analyses and estimations are found on 3 systems of fixed system, double-axes tracking system, and horizontal tracking system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.535-537
• /
• 2021

노후된 태양광 발전 설비를 진단하기 위한 센서 노드와 RTU (remote terminal unit)을 제안하였다. 센서 노드는 주위 온도, 인버터의 전류와 전압을 감시하고, RTU와 RS485로 통신한다. RTU는 여러 센서 노드들이 보내는 센싱 데이터를 모아서 에너지 관리 서버와 LTE CAT. M1으로 통신한다.

• 한국인터넷방송통신학회논문지
• /
• 제22권3호
• /
• pp.201-206
• /
• 2022

에너지 하베스팅(Harvesting)은 1954년 미국 벨 연구소가 태양광을 에너지로 바꾸는 태양전지 연구를 진행하면서 소개된 개념이다. 이러한 에너지 하베스팅 기술은 일상생활 속 버려지거나 미활용 되는 에너지를 모아 전력으로 재활용하는 기술로서 에너지를 효율적으로 활용할 수 있게 하는 친환경 에너지 방안 중 하나로서 다양한 에너지를 적용할 수 있다. 특별히 태양광발전시스템의 경우 맑은 날에 비해 흐린 날씨에 전력생산 Loss가 발생하는 형태로 인버터에서 발생하는 전력 소모를 줄이기 위해, 배터리를 이용하여 발생하는 전기를 저장함으로써 에너지 하베스팅을 적용할 수 있다. 따라서 본 논문에서는 일출, 일몰, 흐린 날씨 등의 낮은 일조량 구간에서 에너지 하베스팅 기술을 적용하여 인버터 동작 최저전압 이하 및 소멸하는 전력을 회수하여 발전량을 개선하고자 한다. 이에 따라 태양광발전 전력량에 따른 시스템 및 알고리즘 개발과 일몰, 일출, 그 밖에 환경에서 발전되는 저 전력을 이용한 시스템과 알고리즘 개발을 통해 연구내용을 증명하였다.

• 한국태양에너지학회 논문집
• /
• 제39권2호
• /
• pp.11-22
• /
• 2019

The first case of the Central Environmental Dispute Mediation Committee, which recently decided to repay the builder for damaging the solar power plant due to the obstruction of the sunshine of new buildings, came out. Even if the Respondent complies with the provisions of the Building Act, the decision of the Complainant can be considered to have been made in light of the fact that the applicant's power plant has suffered from sunlight damage. However, since the extent of the damage may differ depending on the weather, the decision is reserved, and there is room for additional disputes on a regular basis because the loss of power generation to be continuously generated is not reflected in the future. Therefore, in this study, we try to find the direction of dispute adjustment by summarizing the issues related to the generation of power generation due to the influence of shading through the analysis of the case of dispute related to sunlight related to the PV system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.486-491
• /
• 1991

The photovoltaic modules have each maximum power point, which depending on the intensity of sunlight, modules temperature and etc. Cuk converter is used to obtain the maximum charging power from photovoltaic modules to storage batteries. This paper proposed to a new tracking control method by detecting its current and voltage in photovoltaic power generation system controlled by microprocessor, in order to operate at the maximum power point tracking(MPPT) even if the sunlight and the temperature are varied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1702-1704
• /
• 2005

In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The way that controls the daily generation magnitude according to latitude and longitude and uses two axles is often used in the existing sunlight racing system now. In this two-axle sunlight track control system the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the building already built up. This research is a development about the small-scale economy track device of independent load-dispersing type solar generation system. The position track algorithm is through calculating the trail of height and azimuthal of the sun calculation to follow the sun.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.39-40
• /
• 2005

Photovoltaic Power Generation system occupies an important position as an alternative energy source, converting directly sunlight into electricity,using a photovoltaic cell. The Purpose of this research is to present and confirm the effectiveness of concentration and tracking of sun in photovoltaic power generation. Comparative experiments were carried outwith two rating 75 watt solar modules in $25^{\circ}$ under condition of various times concentration, tracking and plain normal measuring generated voltages, currents and temperatures of back sheet of modules by internet monitoring system to find out which is best in economic sense. The experiments show that output power of concentration and tracking photovoltaic power generation is over 180% more then that of plain normal system.

• 한국멀티미디어학회논문지
• /
• 제18권10호
• /
• pp.1231-1240
• /
• 2015

Nowadays, in islands where electricity should be provided autonomously, stand-alone microgrid technologies using renewable energy such as sunlight generation and wind power generation come into wide use. The microgrid electricity generation using renewable energy is greatly affected by the natural environment of a site. In order to maintain stable electricity supply for fluctuating electricity generation due to natural environment, the energy management via EMS is positively necessary. In existing stand-alone microgrid EMS, system operation logic is not changeable flexibly because compiled or builded codes are released into the EMS of a site, respectively. In this paper, we designed a flexible operating script-based microgrid EMS Framework for various sites and applied it to some island sites. We could confirm its usability.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.64-69
• /
• 2009

This paper aims at enhancing the electric production efficiency of photovoltaic(PV) system. The electrical power of PV system is proportional to light intensity on a PV module surface. In this paper, we apply two types of systems to enhance power generation efficiency. First, of all, concentring sunlight using specular surface and one-axis tracking system which traces the sun with vertical direction are applied in this project. From this, we analyze the fixed type method and power generation efficiency.