• 음성과학
• /
• 제10권2호
• /
• pp.249-258
• /
• 2003

This study attempted to examine a speaker identification method using difference sum and correlation coefficient determined from a pair of intensity level matrices of band-pass-filtered numeric sounds produced by ten female speakers of similar age and height. Subjects recorded three digit numbers at a quiet room at a sampling rate of 22 kHz on a personal computer. Collected data were band-pass-filtered at five different band ranges. Then, matrices of five intensity levels at 100 proportional time points were obtained. Pearson correlation coefficients and the sum of absolute intensity differences between a pair of given matrices were determined within and across the speakers. Results showed that very high correlation coefficient and small difference sum generally occurred within each speaker but some individual variation was also observed. Thus, the matrix pair with a higher coefficient and a smaller difference sum was averaged to form each individual's model. Comparison among the speakers yielded generally low coefficients and large differences, which suggests successful speaker identification, but among them there were a few cases with very high coefficients and small differences. Future studies will focus on finer band ranges and additional spectral parameters at some peak points of the intensity contour at a low frequency band.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.108.6-108
• /
• 2001

The basic circuit block diagram of CMOS current mode sum and subtract circuit is present in this paper. The purpose circuit consists of the invert current circuit and the basic current mirror. The outputs of the circuit are the summing of the both input current [lx+ly] and also the subtract of the both input current [lx+(-ly)]. The SPICE simulation results of the electrical characteristics with level 7 (BSIM3 model version 3.1) MOSFET transistor model of the circuit such as the input dynamic range, the frequency response and some system application have been shown and analyzed.

• 대한전자공학회논문지SP
• /
• 제42권4호
• /
• pp.111-118
• /
• 2005

본 논문에서는 진폭 변조 기법을 이용하여 빔포머의 저주파 대역 특성을 개선함으로써 전체적인 잡음 제거 성능을 향상하고자 한다. 일차원 등간격 선형 마이크로폰 어레이를 사용하여 잡음 제거를 할 때, 협대역의 잡음 신호에 대해서는 delay-and-sum 빔포밍으로도 적절한 빔폭을 갖는 빔패턴이 형성되므로 효과적으로 잡음을 제거할 수 있다. 그러나 광대역 잡음 신호에서는 aliasing을 피하기 위해 고주파 신호에 맞게 마이크로폰들을 등간격으로 조정하면 저주파로 갈수록 빔폭이 털어져서 저주파 대역의 잡음은 잘 제거되지 않는다. 광대역 신호에 대해 일정한 빔폭을 갖게 하는 방법들로서 서브 어레이들을 이용한 빔포밍[1][2][3][4] 이나 멀티 빔포밍[5] 등이 제안되어 왔다. 하지만, 이러한 방법들은 주파수에 따라 마이크로폰 간격을다르게 해야 한다는 원리를 기반으로 하는 것이므로 저주파 대역에서도 고주파 대역에서와 같은 좁은 빔폭을 얻기 위해서는 어레이의 크기가 커져야 하는 단점이 있다. 제안하는 알고리즘은 통신에서 주로 사용하는 진폭 변조 기법을 빔포밍에 이용한 것으로서 저주파 대역 신호를 고주파 대역으로 옮김으로써 작은 크기의 마이크로폰 어레이에서도 저주파 대역 잡음을 줄일 수 있는 장점이 있다. 등간격 선형 마이크로폰 어레이에 제안된 방법을 적용한 실험 결과에서 기존의 방법들에 비해 잡음의 저주파 성분이 잘 제거됨을 알 수 있다.

• Steel and Composite Structures
• /
• 제14권4호
• /
• pp.397-408
• /
• 2013

This paper deals with multiobjective optimization of symmetrically laminated composite truncated circular conical shells subjected to external uniform pressure load and thermal load. The design objective is the maximization of the weighted sum of the critical buckling load and fundamental frequency. The design variable is the fibre orientations in the layers. The performance index is formulated as the weighted sum of individual objectives in order to obtain optimal solutions of the design problem. The first-order shear deformation theory (FSDT) is used in the mathematical formulation of laminated truncated conical shells. Finally, the effect of different weighting factors, length-to-radius ratio, semi-cone angle and boundary conditions on the optimal design is investigated and the results are compared.

• Steel and Composite Structures
• /
• 제14권2호
• /
• pp.121-132
• /
• 2013

This paper deals with multiobjective optimization of symmetrically laminated composite angle-ply annular sector plates subjected to axial uniform pressure load and thermal load. The design objective is the maximization of the weighted sum of the critical buckling load and fundamental frequency. The design variable is the fibre orientations in the layers. The performance index is formulated as the weighted sum of individual objectives in order to obtain the optimum solutions of the design problem. The first-order shear deformation theory is used for the mathematical formulation. Finally, the effects of different weighting factors, annularity, sector angle and boundary conditions on the optimal design are investigated and the results are compared.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.156-157
• /
• 2003

The wavelength converter is considered to be a key element of future dense WDM optical networks. It enables wavelength reuse and resolves contention problem. Moreover, the tunability of the wavelength converter enhance the flexibility of network systems by facilitating reconfigurable dynamic wavelength routing. In order to achieve optically tunable wavelength conversion, we recently proposed and experimentally demonstrated wavelength conversion and tuning based on cascaded sum and difference frequency generation in a Ti：PPLN channel waveguide. (omitted)

• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.224-227
• /
• 2006

809nm의 고출력 반도체 레이저(500mV의 출력광과 LD(Laser Diode) 여기 Nd:YVO4레이저의 파장 1064nm를 공진기 내부에서 비선형 광학 소자 KTP(Potassium titanyl posphate : KTPiOPO4)를 사용하여 합주파 발생 파장인 459nm의 청색레이저를 얻었다. 제2의 위상 정합 정합조건(${\psi}=90^{\circ},\;{\theta}=90^{\circ}$)에서 반도체 레이저의 입력광 세기가400mW일 때 청색레이저의 최대 출력 0.95mW를 얻었으며, 청색레이저의 발진문턱입력 세기는 120mW이었다.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.10-15
• /
• 2013

Adsorption behavior of counterions under a Langmuir monolayer was investigated by sum-frequency generation (SFG) spectroscopy. By comparing SFG spectra of arachidic acid (AA) Langmuir monolayer/water interface with and without added salt, it was found that the simple trivalent cation $La^{3+}$ adsorbed on AA monolayer only when the carboxylic headgroups are charged (deprotonated), implying that counterion adsorption is induced by Coulomb interaction. On the other hand, metal hydroxide complex $Fe(OH)_3$ adsorbed even on a charge-neutral AA monolayer, indicating that the adsorption of iron hydroxide is due to chemical interaction such as covalent or hydrogen bonding to the headgroup of the molecules at the monolayer.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 창립 20주년기념 특별학술발표회
• /
• pp.46-47
• /
• 2009

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.405-410
• /
• 2014

In this paper, we compare the quality of images reconstructed by a conventional delayed-sum (DS) algorithm and radiation pattern-based DS algorithm. In order to evaluate the quality of images, we apply the target-to-clutter ratio (TCR), which is commonly used in synthetic aperture radar (SAR) image assessment. The radiation pattern-based DS algorithm enhances the TCR of the image by focusing the target signals and preventing contamination of the radar scene. We first consider synthetic data obtained through GprMax2D/3D, a finite-difference time-domain (FDTD) forward solver. Experimental data of a 2-GHz bandwidth stepped-frequency signal are collected using a vector network analyzer (VNA) in an anechoic chamber setup. The radiation pattern-based DS algorithm shows a 6.7-dB higher TCR compared to the conventional DS algorithm.