• 제목/요약/키워드: Sulfur oxide

검색결과 159건 처리시간 0.029초

Analysis Method of Volatile Sulfur Compounds Utilizing Separation Column and Metal Oxide Semiconductor Gas Sensor

  • Han-Soo Kim;Inho Kim;Eun Duck Park;Sang-Do Han
    • 센서학회지
    • /
    • 제33권3호
    • /
    • pp.125-133
    • /
    • 2024
  • Gas chromatography (GC) separation technology and metal oxide semiconductor (MOS) gas sensors have been integrated for the effective analysis of volatile sulfur compounds (VSCs) such as H2S, CH3SH, (CH3)2S, and (CH3)2S2. The separation and detection characteristics of the GC/MOS system using diluted standard gases were investigated for the qualitative and quantitative analysis of VSCs. The typical concentrations of the standard gases were 0.1, 0.5, 1.0, 5.0, and 10.0 ppm. The GC/MOS system successfully separated H2S, CH3SH, (CH3)2S, and (CH3)2S2 using a celite-filled column. The reproducibility of the retention time measurements was at a 3% relative standard deviation level, and the correlation coefficient (R2) for the VSC concentration was greater than 0.99. In addition, the chromatograms of single and mixed gases were almost identical.

WOx/SBA-15 촉매와 과산화수소를 이용한 선박용 경유의 산화 탈황 연구 (Oxidative Desulfurization of Marine Diesel Using WOx/SBA-15 Catalyst and Hydrogen Peroxide)

  • 오현우;김지만;허광선;우희철
    • Korean Chemical Engineering Research
    • /
    • 제55권4호
    • /
    • pp.567-573
    • /
    • 2017
  • 선박용 경유(황 농도 약 230 ppmw)의 황화합물 제거를 위해 산화텅스텐($WO_x$)을 실리카로 이루어진 다공성 물질인 SBA-15에 담지한 산화 촉매를 제조하였으며 산화제로 과산화수소를 이용한 산화공정과 추출 용매로 아세토니트릴을 이용한 추출공정을 통해 촉매의 산화성능을 확인하였다. XRD 및 XRF, XPS 분석과 BET 이론을 통해 제조한 촉매의 물리적 특성에 대해 조사하였다. 담지된 $WO_x$는 삼산화텅스텐($WO_3$)으로 존재하였으며 실제 담지율이 약 10 wt% 부근일 때 단일층을 형성하는 것으로 판단된다. 제조한 촉매의 산화성능을 확인한 결과, 0.1 g의 13 wt% $WO_x$/SBA-15 촉매와 과산화수소(산소/황 몰 비=10)를 도입하여 $90^{\circ}C$에서 3시간 동안 반응이 이루어졌을 때 76.3%의 가장 높은 황 제거율을 나타냈다. 연속반응 비교 실험을 통해 1회의 산화반응으로 황 화합물의 산화가 충분히 일어났음을 확인하였다. 또한 5회의 추출공정을 통해 최대 94.4%의 황 제거율을 나타냈다.

디젤엔진에서 배기가스 재순환 방법을 이용한 아산화질소의 배출률 저감 (Reduction of Nitrous Oxide Emission by EGR Method on Diesel Engine)

  • 유동훈
    • 동력기계공학회지
    • /
    • 제19권3호
    • /
    • pp.16-21
    • /
    • 2015
  • Nitrous oxide($N_2O$) concentration in the atmosphere has been constantly increased by the human activities with industrial growth after the industrial revolution. One of factors to increase $N_2O$ concentration in the atmosphere is the $N_2O$ emission caused by the combustion of marine fuel. Especially, a sulfur component included in marine fuel oils is known as increasing the $N_2O$ formation in diesel combustion. Form this point of view, $N_2O$ emission from a ship is not negligible. On the other hand, Exhaust gas recirculation(EGR) that have thermal, chemical and dilution effect is effective method for reducing the NOx emission. In this study, an author investigated $N_2O$ reduction by using EGR on a direct injection diesel engine. The test engine was a 4-stroke diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of the engine was a fixed load of 75%. The experimental oil was a blend-fuel that were adjusted with sulfur ratio of 3.5%, and EGR ratio of 0%, 10%, 20% and 30%. In conclusion, diesel fuel that contained 3.5% sulfur component increased $SO_2$ emission in exhaust gas, and increment of EGR ratio reduced NO emission. Moreover, $N_2O$ emission was decreased as over 50% at EGR ratio of 10% and reduced 100% at EGR ratio of 30% compared with $N_2O$ emission of 0% EGR ratio.

Degradation of All-Solid-State Lithium-Sulfur Batteries with PEO-Based Composite Electrolyte

  • Lee, Jongkwan;Heo, Kookjin;Song, Young-Woong;Hwang, Dahee;Kim, Min-Young;Jeong, Hyejeong;Shin, Dong-Chan;Lim, Jinsub
    • Journal of Electrochemical Science and Technology
    • /
    • 제13권2호
    • /
    • pp.199-207
    • /
    • 2022
  • Lithium-sulfur batteries (LSBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) owing to their high energy density and economic viability. In addition, all-solid-state LSBs, which use solid-state electrolytes, have been proposed to overcome the polysulfide shuttle effect while improving safety. However, the high interfacial resistance and poor ionic conductivity exhibited by the electrode and solid-state electrolytes, respectively, are significant challenges in the development of these LSBs. Herein, we apply a poly (ethylene oxide) (PEO)-based composite solid-state electrolyte with oxide Li7La3Zr2O12 (LLZO) solid-state electrolyte in an all-solid-state LSB to overcome these challenges. We use an electrochemical method to evaluate the degradation of the all-solid-state LSB in accordance with the carbon content and loading weight within the cathode. The all-solid-state LSB, with sulfur-carbon content in a ratio of 3:3, exhibited a high initial discharge capacity (1386 mAh g-1), poor C-rate performance, and capacity retention of less than 50%. The all-solid-state LSB with a high loading weight exhibited a poor overall electrochemical performance. The factors influencing the electrochemical performance degradation were revealed through systematic analysis.

스크러버 연계 배기가스 배출제어용 3방향 댐퍼밸브의 구조 안전성 평가 (Structural Safety Evaluation of a 3-way Damper Valve for Scrubber-linked Exhaust Gas Control)

  • 김영훈
    • 한국산업융합학회 논문집
    • /
    • 제23권6_2호
    • /
    • pp.1007-1014
    • /
    • 2020
  • IMO(International Maritime Organization) continues to strengthen environmental regulations on exhaust gases such as CO2, NOx, SOx. As for sulfur oxides, from 1 January 2020, all ships on international voyages must use fuel with a sulfur content of 0.5% or less. Or, it is obligatory to use an exhaust gas treatment device that has the same effect. Shipping companies are using low-sulfur oil, replacing them with LNG fuel, or installing scrubbers that suppress sulfur oxide emissions. In the case of ships using bunker C oil, the load on the engine is lower when entering and departing, so the exhaust gas pressure is lowered and the scrubber cannot be properly utilized. Therefore, diesel oil with low sulfur content is used when entering and leaving the coast. When diesel oil is used, exhaust gas is directly discharged through the control system and piping system, and when bunker C oil is used, sulfur oxides are reduced by scrubbers through other control systems and piping systems to discharge exhaust gas. Accordingly, a company has developed a system called a three-way damper valve that can control exhaust gas emissions while integrating these two control systems and piping systems into one. In this study, the control characteristics of the integrated exhaust gas control system and structural safety against external loads in a high-temperature exhaust gas environment were reviewed.

디젤엔진에 있어서 연료의 성분이 아산화질소 배출에 미치는 영향 (Effect of fuel component on nitrous oxide emission characteristics in diesel engine)

  • 유동훈
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권9호
    • /
    • pp.1045-1050
    • /
    • 2014
  • 아산화질소($N_2O$, Nitrous Oxide)는 이산화탄소($CO_2$, Carbon Oxide), 메탄($CH_4$, Metane)이어 세 번째로 지구온난화에 기여하는 물질로 알려져 있다. $N_2O$의 지구온난화 계수는 대기 중에서 안정하고, 성층권에서 광분해 된 후 이차적인 오염의 원인이 되기 때문에 $CO_2$의 310배에 이른다. $N_2O$의 생성에 대한 조사는 보일러와 같은 연속적인 연소를 갖는 동력원에 대하여 몇몇의 연구자들에 의한 보고가 있었다. 하지만, 디젤엔진에 있어서 연료의 성분이 $N_2O$ 배출에 미치는 영향에 대한 조사는 실시되어지지 않은 상태이다. 그러므로 본 연구에서는 디젤엔진에서 연료 중에 질소와 황 농도에 의해 변화되는 $N_2O$ 배출율에 대하여 조사하였다. 실험에 사용한 엔진은 12kW/2400rpm의 4행정 직접분사식 디젤엔진이고, 실험엔진의 운전조건은 75% 부하에서 이루어졌다. 연료 중의 질소와 황 농도는 Pyridine, Indole, Quinoline, Pyrrol, Propionitrile, Di-tert-butyl-disulfide의 6 종류 첨가제를 사용하여 증가시켰다. 결과에 의하면, 질소성분 0.3% 이하를 갖는 디젤연료는 첨가제의 종류와 농도와 관계없이 $N_2O$ 배출률에 영향을 미치지 않았다. 하지만, 연료 중 황 첨가제의 증가는 배기가스 중의 $N_2O$ 농도를 증가시켰다.

고온 이산화황 환경 내 내열 크롬강에 대한 부식특성 연구 (High Temperature Corrosion Properties of Heat Resistant Chrome Steels in SO2 Atmosphere)

  • 이한상;정진성;김의현
    • 대한금속재료학회지
    • /
    • 제47권2호
    • /
    • pp.99-106
    • /
    • 2009
  • The high temperature corrosion properties of heat resistant steels were investigated in oxidation atmosphere including sulfur dioxide. The heat resistant steels of T22, T92, T122, T347HFG and T304H were evaluated at 620, $670^{\circ}C$ for 400 hours. The corrosion rates showed a decreasing tendency while chrome contents of those steels increased from 2 mass.% to 19 mass.%. The in crease in temperature increasement has an more effect on the corrosion rates of low chrome steels than high chrome steels. The weight gains of T22, T92, T304H at $670^{\circ}C$ were 3.7, 1.65, 1.23 times compared with those at $620^{\circ}C$. The external scale formed on T22 was composed of hematite, magnetite and Fe-Cr spinel and internal layer including iron oxide mixed with sulfide. The scales formed on T92, T122, T304H consisted of an outer layer of hematite and inner layer of chrome oxide and hematite. The proportion of chrome oxide at inner layer was increased when the chrome contents in heat resistant steels were increased.

Advances in oxide thin-film phosphors for field emission displays

  • Hao, J.H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.263-267
    • /
    • 2006
  • Advances in non-sulfur-containing phosphors from low-temperature synthesis of thin-films suitable for glass substrates are discussed. The effects of preparation process on the properties of a variety of rare-earth-doped oxide hosts are reviewed. Cathodoluminescent characteristics have been studied to determine the usefulness of oxide thin-film phosphors in field emission displays.

  • PDF

산화구리에 의한 이산화황의 제거와 수소에 의한 황산구리의 환원 (Removal of Sulfur Dioxide by Cupric Oxide and Reduction of Cupric Sulfate by Hydrogen)

  • 노용우;이명철;이재훈;이태희
    • 한국대기환경학회지
    • /
    • 제10권2호
    • /
    • pp.83-89
    • /
    • 1994
  • The reaction of sulfur dioxide with cupric oxide was investigated over a temperature range of 300-50$0^{\circ}C$, and the regenaration reaction was studied using cupric sulfate and hydrogen over a temperature range of 240-35$0^{\circ}C$ in a fixed bed reactor. The experimental results showed that the efficiencies for elimination and regenaration reactions were maximum at 45$0^{\circ}C$ and at 30$0^{\circ}C$ respectively. In both cases the experimental data could be interpreted properly by shrinking unreacted core model while the chemical reaction is rate controlling step. The reaction rate constants were determined to be 24.88 exp(-6724/RT) (cm/min) for elimination reaction, and 0.0165 exp(-2047/RT)(cm/min ) for regeneration reaction.

  • PDF

동충하초 균사체를 이용한 법제 유황의 항산화활성 및 항염증 효과 (Study on the Anti-oxidative Activity and Anti-inflammatory Effects of Processed Sulfur with Cordyceps Militaris Mycelium)

  • 조화은;김혜자;최윤희;이기남;정명수
    • 동의생리병리학회지
    • /
    • 제23권2호
    • /
    • pp.360-367
    • /
    • 2009
  • The purpose of this study was evaluated physiological activity of processed sulfur with Cordyceps militaris mycelium that antioxidative and antiinflammatory effects. Proliferation of processed sulfur (PS) with Cordyceps militaris mycelium was increased in dose-dependent manner. In organic sulfur contents of Cordyceps militalis mycelium fortified processed sulfur, CM+PSH (CM+3000 ppm of PS) was significantly higher than other groups. However, CM+PSL (CM+1500 ppm of PS) was almost changed organic sulfur. Content of total polyphenol compounds was similarity to CM, CM+PSL and CM+PSH. The EDA (electron donating ability) and SOD-like activity was increased in dose-dependent manner and the activity of CM were significantly higher than CM+PSL and CM+PSH. We examined cytotoxicity, nitric oxide production of Raw 264.7 cell and inhibition of HT 1080 cell by MTT assay. CM, CM+PSL and CM+PSH do not have any toxic effects in macrophages (Raw 264.7). And CM+PSL and CM+PSH inhibited the production of nitrite in Raw 264.7 cells activated with LPS. The antitumor effects of processed sulfur with Cordyceps militaris mycelium on HT 1080 cell was indicated a significantly inhibition activity. These results suggested that processed sulfur with Cordyceps militaris mycelium have activities of antioxidant, antiinflammatory effects.