• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1547-1554
• /
• 2008

This paper proposes a fire shunt guidance system model based on rule, it presents suitable shunt route in real-time according to collected fire information of the building inside using wireless sensor networks. So, this system model is composed of the sensor alert module, the behavior suggestion module, and the emergency device control module. The sensor alert module uses rule-base algorithm that monitored the information to collect periodically in wireless sensor networks. And, the behavior suggestion module proposed a suitable behavior, this module supports to judge the fire area with danger sensor list. Additional, the emergency device control module controls a related emergency device according to the suggested behavior and to present on a control screen. We experiment the fire shunt guidance system based on Internet Web for operation verification of the proposed system. Consequently, this study supports people safety with the behavior suggestion according to the context information when an emergency situation happens.

• Communications of the Korean Mathematical Society
• /
• v.9 no.2
• /
• pp.361-367
• /
• 1994

An elliptic module is an analogue of an elliptic curve over a function field [D]. The dual of an elliptic curve E is represented by Ext(E, $G_{m}$) and the Cartier dual of an affine group scheme G is represented by Hom(G, G$G_{m}$). In the category of elliptic modules the Carlitz module C plays the role of $G_{m}$. Taguchi [T] showed that a notion of duality of a finite t-module can be represented by Hom(G, C) in a suitable category. Our computation shows that the Ext-group as it stands is rather too "big" to represent a dual of an elliptic module.(omitted)

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.65-70
• /
• 2023

In the paper, we propose a design method and process of a hybrid V2X communication module that combines WAVE communication, LTE-V2X communication, and legacy LTE communication in evaluating vehicle V2X electromagnetic compatibility. C-ITS is suitable for safety service applications due to its low latency, and legacy LTE is suitable for applications such as traffic information and infotainment due to its high latency and high capacity. In order to evaluate the V2X communication system, the evaluation equipment must have communication performance of the same level or higher. The main design contents presented in this paper will be applied to the implementation of a hybrid V2X communication module for electromagnetic compatibility evaluation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• Journal of Creative Information Culture
• /
• v.5 no.1
• /
• pp.45-51
• /
• 2019

In this paper, virtual reality programming modules were developed for software education advanced courses in elementary and middle schools. And the effectiveness of the developed module was also analyzed. As the result, virtual reality programming module developed in this study was proven to be suitable for software education advanced courses required after basic coding in elementary and middle school. In particular, it is expected that it will be very helpful for the information gifted education program which is carried out in 2,920 gifted education institutions nationwide. Also, it is expected that it will be suitable for STEM education.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.335-337
• /
• 2005

The purpose of this work is to explain techniques achieved while developing a transient stability program which is suitable to Korean power system, and to add a module for contingency screening. It concentrates on the development of Contingency Screening Module. In this thesis, a fast contingency screening algorithm SIME(Single Machin Equivalent), which is one of the Hybrid methods for the transient stability assessment is used to develop the contingency screening module. The proposed module is applied to a KEPCO system, and simulation results obtained from the program are compared to those of commercial programs.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.3
• /
• pp.247-255
• /
• 2013

In this paper, a soft switching DC-DC converter for AC module type photovoltaic (PV) module integrated converter is proposed. A push-pull converter is suitable for a low voltage PV AC module system because the step-up ratio of a high frequency transformer is high and the number of primary side switches is relatively small. However, the conventional push-pull converters do not have high efficiency because of high switching losses by hard switching and transformer losses (copper and iron losses) by high turns-ratio of the transformer. In the proposed converter, primary side switches are turned on at zero voltage switching (ZCS) condition and turned off at zero current switching (ZVS) condition through parallel resonance between secondary leakage inductance of the transformer and a resonant capacitor. Therefore the proposed push-pull converter decreases the switching loss using soft switching of the primary switches. Also, the turns-ratio of the transformer can be reduced by half using a voltage-doubler of secondary side. The theoretical analysis of the proposed converter is verified by simulation and experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6419-6424
• /
• 2014

The use of the PMP (Protection Module Package) was proposed as a solution for the shorter battery lifetime. The PMP means that a protection circuit consists of a semiconductor single. In this study, basic research was carried out to select a suitable epoxy material of the EMC module through finite element analysis. First, the stress on the external force was compared by the flexural strength analysis. In the following thermal analysis, the temperature change of the EMC module and the internal part was compared using the calculated heating value. Finally, the filling ratio was compared with the injection of the melting epoxy in the EMC module.

• New & Renewable Energy
• /
• v.17 no.2
• /
• pp.24-31
• /
• 2021

Renewable energy has become more popular with the increase in the use of solar power. Consequently, the disposal of defective and old solar panels is gradually increasing giving rise to a new problem. Furthermore, the efficiency and power output decreases with aging. Researchers worldwide are engaged in solving this problem by developing eco-module technologies that restore and reuse the solar panels according to the defect types rather than simple disposal. The eco-module technology not only solves the environmental problem, but also has economic advantages, such as extending the module life. Replacement of encapsulants contributes to a major portion of the module maintenance plan, as the degradation of encapsulants accounts for 60% of the problems found in modules over the past years. However, the current International Electrotechnical Commission (IEC) standard testing was designed for the commercialization of solar modules. As the problem caused by long-term use is not considered, this method is not suitable for the quality assurance evaluation of the eco-module. Therefore, to design a new accelerated test, this paper provides an overview of EVA degradation and comparison with the IEC and accelerated tests.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.2
• /
• pp.74-91
• /
• 2023

This study provides an in-depth comparison and analysis of various risk assessment models widely used in modern industries, and proposes the most suitable model for risk assessment of offshore wind power in Korea. The assessment models were selected by considering various factors such as the purpose of risk assessment, stakeholder requirements, and characteristics of offshore wind power. We also emphasized the importance of using different risk assessment models in combination in situations of high uncertainty. To systematize the combination of risk assessment models, we used systems engineering which is effective to develop a new system. Systems engineering was used to define the complete, traceable functions from site requirements, and model-based systems engineering was used to manage the design information from requirements to detailed functions in a single model. The developed risk assessment module provide automatic conversion between risk assessment models to enable risk assessment suitable for offshore wind power. The functionality and usability of the offshore wind risk assessment module were verified by the evaluation of three wind power experts.