• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3124-3124
• /
• 2001

The development and evolution of near infra-red spectroscopic (NIS) calibrations for high-moisture materials is an expensive proposition. Such investment is suspect unless the instrument, or instruments, on which calibrations were developed can be preserved intact or re-standardized as component replacements occurs. The objective of this paper is to detail the changes in performance of a six-year old instrument after maintenance in years five and six resulted in collection of spectral data that was increasingly removed from the calibration population. Calibrations for the analysis of mature sugarcane stalks, a high-moisture material, were developed successfully in 1995 using a broad sample population in terms of genetics, and spectral and temporal variation. The spectral library was further broadened in 1996. In 1997, 1999, 1999, and 2000, additional samples constituting 10% of the laboratories throughput were subjected to full component analyses using routine laboratory techniques. These samples were primarily random samples, but were complemented with samples that were significant for the spectral H statistic or for the component t statistic. In 1998, an additional calibration was developed for populations consisting of samples of either mature stalks (culms) or sucker culms. Substantial additional samples numbers were collected for this calibration in 1999 and 2000. Attempts to standardize the scanning spectrophotometer used for these calibrations with a second similar instrument in 1999 failed because the instruments were optically different, and standardization could not account for this. Maintenance adjustments were made to the remote reflectance probe of the original instrument in 1999, and replacement of its PbS detectors was done in 2000. Spectral data collected in 1999 and 2000 yielded spectral populations that were increasingly removed from the respective spectral populations on which the calibrations were developed. The mature stalk calibrations benefited marginally from evolutionary calib.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.164-168
• /
• 2015

Citric acid is produced via submerged fermentation using yeasts. Among eight different strains of yeast, Candida zeylanoides was chosen as the strain for producing citric acid and optimized for various C/N ratios and effects of phosphate or Fe²⁺ ions in a clean carbon source medium (glucose: fructose, 1:1). The yield of citric acid was maximized at a C/N ratio of 40/1, a phosphate addition of 1.0 g/l, and an Fe²⁺ ion concentration of less than 50 mg/l, yielding up to 91 g/L in the broth with 18.5 g/l of isocitric acid in a six-day fermentation period using a pre-treated molasses medium. The yield of batch culture was 0.51 (Y_p/s, g/g) in a 5 L-Jar fermenter.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.4
• /
• pp.303-308
• /
• 2000

The objective of this experiment was to evaluate chemical composition, dry matter(DM) digestibility, DM intake, relative feed value(RFV) and hay grade of imported roughage which was collected by wholesale dealer at Chungnam province in 1999. Experimental roughages includes 8 kinds of imported hays(com stover bale, tall fescue straw, green cell, bermudagrass straw, reed carnarygrass straw, alfalfa bale, sugarcane bale and oat hay) and mixture hay(control) which was harvested at Chungnam National University experimental field. Compared with mixture hay(control) except for alfalfa bale, crude protein of most imported roughage was low, but NDF, ADF, cellulose and lignin compound were high. Futhermore, DM digestibility, DM intake, RFV and hay grade of imported roughage except for alfalfa bale was significantly lower than those of mixture hay(control)(P<0.05). Therefore, it is necessary to evaluate the economic value in the aspect of quality for the imported roughages.

• Microbiology and Biotechnology Letters
• /
• v.45 no.4
• /
• pp.330-342
• /
• 2017

Statistical design of experiments was employed to optimize the media composition for the production of laccase from Bacillus sp. PK4. In order to find the key ingredients for the best yield of enzyme production from the selected eleven variables viz yeast extract, glucose, zinc sulphate, copper sulphate, potassium chloride, magnesium sulphate, calcium chloride, ferrous sulphate, sodium chloride, potassium dihydrogen phosphate ($KH_2PO_4$) and dipotassium hydrogen phosphate ($K_2HPO_4$), Plackett-Burman design was applied. The $MgSO_4$, $FeSO_4$, and $CuSO_4$ showed positive estimate, and their concentration optimized further. The steepest ascent method and Box-Behnken method revealed that 1.5 mM $MgSO_4$, 0.33 g/l $FeSO_4$ and 1.41 mM $CuSO_4$ were optimal for the laccase production by Bacillus sp. PK4. This optimization strategy leads to enhancement of laccase production from 2.13 U/ml to 40.79 U/ml. Agro-wastes residues replace the carbon source glucose in the optimized media namely sugarcane bagasse, wheat bran, rice husk, and groundnut shell, among these groundnut shells (117 U/ml) was found to enhance the laccase production significantly. The laccase produced by Bacillus sp. PK4 was found to have the potential to degrade persistent organic pollutant benzo[a]pyrene.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.610-615
• /
• 2001

Over 800 thousand tons per year (TPY) agricultural biowastes, such as sugar cane bagasse, sugarcane leaf, rice straw, rice husk and corn leaf, are produced in Taiwan. These biomasses are the major types of agricultural wastes and are abundantly available. However, these biowastes cause disposal and landfill problems. Ossification ashes of the agricultural biowastes containing 70-95 % amorphous silica would make the utilization system of agricultural biowaste ashes become highly economically and environmentally attractive. Experimentally, high crystallinity (99%$^{+}$) zeolites ZSM-5 and ZSM-48 synthesized from the reaction mixtures containing a silica source from ashes of these biowastes gasification were investigated. Tetrapropylammonium bromide (TPABr) and 1,6-diamino-hexane (C$_{6}$ DN) were used as structure-directing agents in syntheses of ZSM-5 and ZSM-48, respectively. X-ray powder diffraction (XRD) and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDX) data indicated that ZSM-5 or ZSM-48 with a high crystallinity can be obtained within 48 hours of crystallization in the high pressure (15-20 atm) autoclave at 393-473 K. The Si/Al ratios of synthetic zeolite products were determined by X-ray fluorescence (XRF) and induced couple plasma/mass spectroscopy (ICP/MS). It was observed that the ZSM-5 crystals a.e composed of hexagonal rod-shaped crystals with typically 8-13 пm in size by SEM. In addition, ZSM-48 crystalline materials are composed of spherical aggregates of needle-shaped or rod-like crystals with typically 2-3 пm in diameter and 6-8 пm in length.h.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.178-186
• /
• 2018

Generally, in terms of the development of irrigation scheme, the efficient water resource management that supplies the irrigation water in consideration of the required time and accurate quantity to grow the crop should be conducted. The water resource assessment should precede to supply the irrigation water efficiently. The water resources assessment is divided into the water requirement analysis and the water availability assessment. In case of Korea, the major crop is paddy rice unlike crops of Africa, such as sugarcane, maize, and cassava, etc. Because it is not familiar with the method for upland irrigation development in tropical area, it needs to know the water resources assessment for irrigation scheme development about these crops. The Natama Scheme in Chiradzulu District of the Southern Malawi was selected as study area, which has tropical climate. From the collected meteorological data, the evapotranspiration was analyzed by Penman-Monteith Method and the effective rainfall was analyzed by USDA Soil Conservation Service Method. This study displays the results that for study area, the evapotranspiration varies from 2.80 mm/day to 5.51 mm/day and the effective rainfall varied from 2.1mm to 149.0mm. According to the selected crop (Green Maize, Dry Maize), the unit water requirement (UWR) and water demand (WD) considering the irrigation efficiency, irrigation time and irrigation area were estimated to be $0.00122m^3/s/ha$ and $0.0122m^3/s$ respectively. For the water availability assessment, the runoff of Natama scheme was calculated by specific yield method. The water availability was evaluated through reviewed differences of discharge between $Q80_{intake}$ and Total WD, and the irrigation water can be supplied sufficiently in the existing 10ha of Natama scheme. As a result of reviewing the extensibility of irrigable area, total WD of scheme is $0.02313m^3/s$, and $Q80_{intake}$ is $0.02387m^3/s$ ($Q80_{intake}$ > Total WD). Therefore, Natama scheme can be extended from 10 ha to 17 ha in the dry season in consideration of the $Q80_{intake}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1294-1299
• /
• 2002

The study aimed to evaluate the influence of molasses in ensiling cassava and Gliricidia tops, common crop residues in the farming systems of Vietnam. Four levels of sugarcane molasses: 0, 30, 60 and 90 kg per tonne of fresh material, and two storage periods (2 and 4 months) for each of the two plant species: Cassava (Manihot esculenta, Crantz) and Gliricidia (Gliricidia sepium, Jacq.) were allocated in a 4${\times}$2 factorial completely randomized block design with 3 replicates. A total of 48 plastic bags, each one containing 10 kg herbage were used. Based on the colour, smell and mold appearance, all the silages were considered to be acceptable but with more spoiled silages with higher levels of additives. DM of herbages (25.8% and 22.4% in cassava and Gliricidia tops, respectively) were not changed during ensiling and the molasses additive had no significant effect on the silage DM. Contents of CP and NDF in the cassava tops silage decreased significantly with increased level of molasses and storage period, respectively. The mean pH values of non-molasses silages were 4.39 in cassava tops and 4.60 in Gliricidia tops. Increased additive levels significantly reduced silage pH in Gliricidia (p<0.01) but not in cassava tops silage (p=0.10). Longer storage period significantly reduced pH in both silages. The water soluble carbohydrate (WSC) concentrations of cassava tops and Gliricidia tops were reduced by 90 and 80%, respectively, after ensiling. Molasses addition increased significantly the silage WSC concentrations. HCN contents in the fresh cassava and Gliricidia tops were reduced by 68 and 43%, respectively, after 2 months ensiling, and were continuously reduced during storage. A reduction of 25% and 42% in the tannin content of fresh cassava and Gliricidia tops, respectively was found after ensiling. Storage time and molasses additive had little affect on the tannin content. Silage lactic acid concentrations were around 1,0% of DM in cassava and 1.7% of DM in Gliricidia top silages, and no effect of molasses additive and storage time was found. It is concluded that cassava and Gliricidia tops residues can be preserved successfully by ensiling, and only low levels of molasses additive are needed to improve silage fermentation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.633-637
• /
• 2004

The experiment of silage for preservation of fresh Italian ryegrass (Lolium multiflorum) was carried out to examine whether the fermentation quality and microbial degradation in the rumen can be altered by the treatment of amino acids fermentation byproduct (AFB). The plant was ensiled for 40 days with 4 treatments of different ratios of AFB and sugarcane molasses (SCM) mixture. The treatment 2 (T2, AFB:SCM=100:0) and treatment 3 (T3, AFB:SCM=40:60) silages showed higher (p<0.05) concentrations of lactic acids, lower (p<0.05) pH and dry matter (DM) losses than the Control (T1, none additive) and treatment (T4, AFB:SCM=0:100) silages. The treatments 2 and 3 contained higher (p<0.05) DM and crude protein contents in silages compared to treatments 1 and 4 silages. The NDF, ADF and cellulose contents were also lower (p<0.05) in T2, T3 and T4 silages than T1 silage and fresh material before ensiled. The in situ rumen DM, NDF, ADF, hemicellulose and cellulose degradability was also higher (p<0.05) in T2, T3 and T4 silages than T1 silage, while the highest improvement was achieved with addition of AFB:SCM at level of 40:60 at ensiling. The result in this study indicates that the addition of AFB and SCM additives improved the silage fermentation and cell wall degradability of Italian ryegrass silage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.295-301
• /
• 1992

Eight crop residues : 1, sorghum (Sorqhum bicolor) straw, 2, maize (Zea mays) straw, 3, cotton (Gossypium Sp.) straw, 4, sunflower (Helianthus Sp.) straw, 5, cotton (Gossypium Sp.) seed hulls, 6, groundnut (Archais hypogaea) hulls, 7, maize (Zea mays) cobs, 8, sugarcane (Saccharum officinarum) bagasse and two forest grasses 9, Heteropogan contortus dry grass and 10, Sehima nervosum dry grass were subjected to three physical processing 1, chopping (2-3 cm) 2, grinding (8 mm sieve) and 3, pelleting (10 mm die holes). The processed material was fed ad lib. Along with 250 g of concentrate mixture per head per day to 6 adult local goats and 16 adult Nellore rams in ten digestion experiments and finally assessed the nutritive value of the processed roughages by difference method. Grinding increased bulk density by 32.4 (cotton seed hulls, CSH) to 88.1% (Sehima dry grass) while pelleting of ground material increased bulk density by 53.9 (maize cobs) to 235.8% (maize straw). The average particle size ranged from $584.1/^U$ (sorghum straw) to $1467/^U$ (CSH). Modulus of uniformity ranged from 2:5:3 (sorghum straw) to 7:2:1 (CSH) while modulus of fineness ranged from 3.4 (sorghum straw) to 5.4 (CSH). Molasses absorbability was highest with cotton seed hulls and least with maize cobs. Pelleting increased DM intake of the residues except cotton seed hulls compared to grinding. Grinding of chopped material/unprocessed material increased DM intake on sorghum straw and cotton seed hulls. Sheep consumed more DM compared to goats on all the residues except sorghum and sunflower straws. Pelleting increased nutritive value of all the residues compared to grinding and chopping. However, no difference was observed in the nutritive value due to grinding and chopping. Goats performed better compared to sheep in utilizing the fibrous residues.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.3
• /
• pp.393-398
• /
• 2007

The present study was carried out to investigate the serum minerals profile in buffaloes (Bubalus bubalis) suffering from parturient haemoglobinuria (PHU) along with minerals profile of soils and fodders from the disease prone areas and their interrelationships. Serum samples were collected from 60 each of healthy and PHU affected buffaloes randomly selected from field cases. Serum samples were collected from each animal. Fifty composite soil samples were collected where PHU was prevalent. Fifty samples of fodders including leaves and stems being fed to the diseased buffaloes were collected. The difference in the levels of calcium and potassium between upper and lower soil surface of disease prone areas under study were statistically non-significant. The mean values of phosphorous, copper, iron, selenium and molybdenum in upper soil surface were significantly (p<0.05) higher than in lower soil surface. None of the fodders offered to the diseased animals met the dietary requirements of phosphorus and copper whereas none of the fodders was deficient in potassium, iron and selenium rather were having excess of potassium, iron and selenium. The concentration of calcium was adequate in lucerne, berseem, sarson and sorghum, while maize, sugarcane and wheat straw did not meet the required levels for dairy animals. Molybdenum contents in all fodders were adequate to meet the dietary requirements of the dairy buffaloes. Serum phosphorus, copper and selenium were significantly (p<0.001) lower whereas potassium, iron and molybdenum in buffaloes suffering from PHU were significantly (p<0.001) higher than in healthy buffaloes. It was concluded that phosphorous deficient soils play a major role by transferring this deficiency to plants and ultimately reaching to animals where hypophosphataemia is a consistent finding.