• Archives of Plastic Surgery
• /
• 제37권6호
• /
• pp.742-748
• /
• 2010

Purpose: The method of using ultrasound-assisted liposuction and excision of the remaining glandular tissue is the preferred method for treating gynecomastia and is currently used worldwide. Herein, this article described the role of ultrasound-assisted liposuction before a surgical excision in the treatment of gynecomastia. The cosmetic results were objectively evaluated. Methods: 11 patients (22 breasts) underwent ultrasoundassisted liposuction and suction-assisted lipectomy between April 2007 and January 2009. At the end of the liposuction, the remaining glandular tissue was removed through the incision used for liposuction. We evaluated the cosmetic results using ordinary scale methods on the basis of four categories (recurrence, symmetry, contour irregularity, and scar). Results: The volume of aspirates ranged between 50 and 200 cc per breast and the average weight of tissue removed by excision was 65g per breast. No complications were recorded. Regarding the cosmetic evaluation, the recurrence, contour irregularity, and scar were excellent, the symmetry was good, and the overall results represented all those cases were mostly excellent. Conclusion: Ultrasound-assisted liposuction has many advantages in the treatment of gynecomastia. When excising the remaining glandular tissue, bleeding is decreased by the use of a tumescent technique. The glandular tissue is easily mobilized and excised after being "morselized" with ultrasound-assisted liposuction. The glandular tissue is simply dissected via the suction surface. Compared the residual mound of glandular tissue beneath the nipple and areola to the periphery, it facilitates precise control of the excision.

• 지질공학
• /
• 제27권1호
• /
• pp.21-29
• /
• 2017

광미 적치사면에서 측정된 모니터링 결과와 현장조건을 고려한 수치해석결과를 이용하여 강우시 불포화 토층내 모관흡수력변화를 비교하고 이를 토대로 사면안정해석을 수행하였다. 이를 위하여 계측기간 동안 강우강도가 가장 크게 발생된 기간(72시간)을 선정하고, 대상기간 동안의 모관흡수력과 강우자료를 분석하였다. 그리고 현장에서 측정된 강우자료를 적용하여 침투 및 사면안정해석을 수행하였다. 강우에 따른 사면내 침투거동을 해석하기 위하여 SEEP/W를 활용하고 사면내 침투깊이를 고려한 사면안정해석을 위하여 SLOPE/W를 활용하였다. 먼저 현장에서 측정된 강우자료를 적용하여 SEEP/W를 이용한 침투해석을 수행하였다. 침투해석으로 계산된 모관흡수력과 현장계측으로 측정된 모관흡수력을 비교한 결과 모관흡수력의 크기에서는 다소 차이가 있으나 시간에 따른 변화양상은 유사한 것으로 나타났다. 그리고 침투해석결과와 연동하여 SLOPE/W를 이용한 사면안정해석을 수행한 결과 강우강도가 급속하게 증가되는 시점에서 사면안전율은 크게 감소하였으며, 이후 강우가 발생되지 않는 경우 사면안전율이 회복되는 것으로 해석되었다.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.622-628
• /
• 2016

자동차에 부착하여 사용하는 자전거 캐리어 지지용 흡착 패드는 운행 중 임의의 진동과 원심력과 같은 과도한 동적 하중을 받을 수 있어, 구조 안전성의 검토가 중요하다. 이를 위해서는 유체-구조 연계 유한요소해석을 이용하여 패드의 하부 압력이 패드에 가해지는 하중이나 모멘트의 변화에 따라 실시간으로 변화하는 것을 고려하여야 하나, 실제 상황의 모델링이 어렵고 계산을 위한 소프트웨어 비용이 높은 단점이 있기도 하지만, 정확한 결과를 얻기도 어렵다. 따라서 이 논문에서는 실험과 전산적인 방법을 조합하여 활용하는 새로운 방법을 제시한다. 이는 변화하는 하중에 따라 패드 하부의 압력과 접촉 면적을 실시간으로 측정하고 여기서 얻어진 데이터를 비선형 탄성 유한요소해석에 입력하여 활용하는 방법이다. 개발 단계의 제품 형상으로 실험 및 계산을 수행한 결과, 마운트 패드는 축 방향 하중에 대해서는 비교적 안전하나, 회전 하중이 과도하게 작용할 경우 패드가 바닥으로부터 분리되거나 패드 표면에 국부적인 손상이 일어날 수 있어 안전 여유가 많지 않음을 보여주었다. 작용하는 하중의 크기 및 형태에 따라 변화하는 접촉 거동을 예측하는 결과는 실험 결과와 잘 일치하였다. 본 연구에서 제안하는 해석 방법은 유사한 흡착 패드 시스템을 설계할 때 유용하게 활용될 수 있을 것으로 보인다.

• 지질공학
• /
• 제25권3호
• /
• pp.377-385
• /
• 2015

본 연구에서는 강우강도에 따른 토층내 포화속도를 산정하기 위하여 모형실험장치를 개발하고 일련의 모형실험을 수행하였다. 모형실험장치는 모형토조, 강우재현장치 및 계측장치로 구성되어 있다. 모형지반(60 cm × 50 cm × 15 cm)은 상대밀도 75%의 주문진 표준사로 조성하였으며, 강우재현장치는 강우강도의 조절이 가능하도록 하였다. 그리고 토층내 강우침투시 깊이별 체적함수비 및 모관흡수력의 변화를 측정하기 위하여 TDR과 Tensiometer를 설치하였다. 모형실험결과 토층의 입도가 균등하고 투수계수가 상대적으로 크므로 강우시 지표면에서 습윤전선이 형성되어 하강하는 것이 아니라 하부 바닥면에서부터 지하수위가 형성되어 상승하면서 포화가 진행되었다. 강우시 토층내 흡입응력의 변화를 살펴본 결과 토층 내에서 체적함수비가 증가함에 따라 흡입응력은 감소하며, 체적함수비가 20-30% 사이에서 흡입응력은 비교적 빠르게 감소하였다. 강우강도와 토층의 평균포화속도를 회귀분석한 결과 강우강도에 따른 평균포화속도는 V_savg (cm/sec) = 0.068I_R (mm/hr)와 같이 제안할 수 있다.

• 한국유체기계학회 논문집
• /
• 제5권3호
• /
• pp.33-39
• /
• 2002

The head-capacity corves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and with no stray currents. Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. However, various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall, and back-wall due to different clearances from back-wall to vortical intake pipe. Moreover, the locations and patterns of the various types of vortices that were found in the examinations are discussed.

• 박물관보존과학
• /
• 제9권
• /
• pp.67-83
• /
• 2008

국립중앙박물관이 소장하고 있는 청연군주 출토복식(신수751 의류 일괄) 중 織金 및 金箔이 있는 복식의 보존 처리 과정을 소개하고자 한다. 금사 및 금박의 비파괴분석(X-선형광분석:XRF)을 실시한 다음 표면의 금(Au)이 열화가 진행되면서 분상화된 금층에 아교 2%용액을 도포하여 접착력을 강화하였다. 표면의 먼지와 오염물제거를 위해 진공흡입을 통한 건식세척과 분사식 습식세척을 병행하였고 손상부분을 보수하여 유물의 원형을 회복하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.209-215
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the Pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.60-66
• /
• 2007

Separation control has been performed using synthetic jets on airfoil at high angle of attack. Computed results demonstrated that stall characteristics and control surface performance could be substantially improved by resizing separation vortices. It was observed that the actual flow control mechanism and flow structure is fundamentally different depending on the range of synthetic jet frequency. For low frequency range, small vortices due to synthetic jet penetrated to the large leading edge separation vortex, and as a result, the size of the leading edge vortex was remarkably reduced. For high frequency range, however, small vortex did not grow up enough to penetrate into the leading edge separation vortex. Instead, synthetic jet firmly attached the local flow and influenced the circulation of the virtual airfoil shape which is the combined shape of the main airfoil with the separation vortex. Theses results show the characteristic of unsteady flow of single synthetic jet. Beside, we researched on multi-array synthetic jet to obtain applicable synthetic jet velocity. Multi-location synthetic jet is proposed to eliminate small vortex on suction surface of airfoil. With the results, we concluded that the flow around airfoil is stable by high frequency synthetic jet with elimination of small vortex and confirmation of stable flow. Moreover, performance of multi-array/multi-location synthetic jet can be improved by changing phase angle of multi-location synthetic jet.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.1077-1088
• /
• 2006

This paper describes a numerical investigation on the performance deteriorations of a low speed, single-stage axial turbine due to use of rough blades. Numerical calculations have been carried out with a commercial CFD code, CFX-Tascflow, by using a modified wall function to implement rough surfaces on the stator vane and rotor blade. To assess the stage performance variations corresponding to 5 equivalent sand-grain roughness heights from a transition ally rough regime to a fully rough regime, stage work coefficient and total to static efficiency were chosen. Numerical results showed that both work coefficient and stage efficiency reduced as roughness height increased. Higher surface roughness induced higher blade loading both on the stator and rotor which in turn resulted in higher deviation angles and corresponding work coefficient reductions. Although, deviation angle changes were small, a simple sensitivity analysis suggested that their contributions on work coefficient reductions were substantial. Higher profile loss coefficients were predicted by higher roughness heights, especially on the suction surface of the stator and rotor. Furthermore sensitivity analysis similar to the above, suggested that additional profile loss generations due to roughness were accountable for efficiency reductions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.563-569
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.