References
- ASTM D5084, 2000, Standard test methods for measurement of hydraulic conductivity of saturated porous materials using a flexible wall permeameter, ASTM International, West Conshohocken, PA. 1-24.
- Banks, D., Younger, P. L., Arnesen, R. T., Iversen, E. R., and Banks, S. B., 1997, Mine-water chemistry: the good, the bad and the ugly, Environmental Geology, 32(3), 157-174. https://doi.org/10.1007/s002540050204
- Blight, G. E., 2000, Management and operational background to three tailings dam failures in South Africa, Proc. Slope Stability in Mining, Littleton, Colorado, U.S.A., 383-390.
- Blight, G. E. and Amponash-Da Costa, F., 2004, Towards the 1000-year erosion-free tailings dam slope - A study in South Africa, Proc. Ground Water Bioengineering for Erosion Control and Slope Stabilization, New Hampshire, U.S.A. 365-376.
- Blight, G. E., Rea, C. E., Caldwell, J. A., and Davidson, K. W., 1981, Environmental protection of abandoned tailings dams, Proc. 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Sweden, 1, 303-308.
- Cho, S. E. and Lee, S. R., 2001, Instability of unsaturated soil slopes due to infiltration, Computers and Geotechnics, 28, 185-208. https://doi.org/10.1016/S0266-352X(00)00027-6
- Cho, Y. C. and Song, Y. S., 2014, Deformation measurements and a stability analysis of the slope at a coal mine waste dump, Ecological Engineering, 68, 189-199. https://doi.org/10.1016/j.ecoleng.2014.03.005
- Cho, Y. C., Song, Y. S., and Kim, K. S., 2011, Investigation and analysis of ground deformation at a coal waste depot in Dogye, The Journal of Engineering Geology, 21(3), 199-212 (in Korean with English abstract). https://doi.org/10.9720/kseg.2011.21.3.199
- Dobry, R. and Alvarez, L., 1967, Seismic failures of Chilean tailing dams, Jour. of the Soil Mechanics and Foundations Division, ASCE, 93(6), 237-260.
- GEO-SLOPE International Ltd., 2008a, Stability modelling with SLOPE/W 2007, 4th Ed., 355p.
- GEO-SLOPE International Ltd., 2008b, Seepage modelling with SEEP/W 2007, 4th Ed., 307p.
- Griffiths, D. V. and Lu, N., 2005, Unsaturated slope stability analysis with steady infiltration or evaporation using elastoplastic finite elements, International Journal for Numerical and Analytical Methods in Geomechanics, 29, 249-267. https://doi.org/10.1002/nag.413
- KS F 2343, 2007, Testing method for direct shear test of soils under consolidated drained conditions, Korean Standard Association, 1-5 (in Korean).
- Lo, R. C. and Klohn, E. J., 1996, Design against tailings dam failure, Proc. Int. Sym. Seismic Environ. Aspects Dam Design, Santiago, Chile, 1, 35-50.
- Ng, C. W. W. and Shi, Q., 1998, A numerical investigation of the stability of unsaturated soil slopes subjected to transient seepage, Computers and Geotechnics, 22(1), 1-28. https://doi.org/10.1016/S0266-352X(97)00036-0
- Song, Y. S., 2015, Numerical analysis of the seepage and stability of a mine waste-dump slope during rainfall, The Journal of Engineering Geology, 25(1), 1-10 (in Korean with English abstract). https://doi.org/10.9720/kseg.2015.1.1
- Song, Y. S., Hong, W. P., and Woo, K. S., 2012, Behavior and analysis of stabilizing piles installed in a cut slope during heavy rainfall, Engineering Geology, 129-130, 56-67. https://doi.org/10.1016/j.enggeo.2012.01.012
- Song, Y. S. and Jung, I. G., 2016, Establishment on the monitoring system for unsaturated characteristicss variation in a mine waste-dump slope, Jour. Korean Geosynthetics Society, 15(3), 49-55 (in Korean with English abstract). https://doi.org/10.12814/jkgss.2016.15.3.049
- Song, Y. S., Kim, K. S., Jeong, S. W., and Lee, C. O. 2014, Estimation on unsaturated characteristic curves of tailings obtained from waste dump of Imgi mine in Busan, Jour. Korean Geotechnical Society, 30(3), 47-58 (in Korean with English abstract). https://doi.org/10.7843/KGS.2014.30.3.47
- van Genuchten, M. T., 1980, A closed-form equation for predicting the hydraulic conductivity of unsaturated soils, Soil Science Society of America Journal, 44, 892-898. https://doi.org/10.2136/sssaj1980.03615995004400050002x