• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.64-68
• /
• 1998

본 연구의 목적은 수도권 지하철차량의 소음과 진동에 방음차륜(또는 탄성차륜)이 어느 정도의 효과를 가져오는가를 평가하기 위한 것이다. 실차시험을 통하여 일체차륜이 장착된 차량과 방음차륜이 장착된 차량의 차내소음 및 차체진동을 비교하여 보았다. 그 결과 방음차륜은 지하철차량의 소음과 진동에 효과가 있음을 알 수 있었다. 그러나 실제 적용은 소음과 진동 이외에도 여러 가지 측면에서의 검토가 이루어져야만 가능할 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.265-272
• /
• 1998

In this paper, the intoner noise reduction for subway railroad vehicles was studied by improving transmission loss of carbody panels and side doors, and on-line tests were conducted to examine the exterior noise levels at various running conditions. Also the transmission loss for design candidates of the carbody specimen was measured in two reverberation rooms. From the results of the tests, side door gap is the most dominant factor affecting the Interior noise level of subway railroad cars with a sliding typed side door. The next one is revealed to transmission loss of a floor panel. To improve the transmission loss of the carbody, many activities were conducted such as, treatment of resilient and sound-absorbing materials and reducing the gap of the side door by adopting a brush and rubber, etc. The estimated interior noise level for modified car which is designed with improved carbody panels is lower than original car by about 5㏈.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1852-1857
• /
• 2007

지하철 초기 도입 후 한국형 표준전동차 생산단계까지 눈부신 발전을 하였으나 철도법을 알지 못하거나 관계자이 아닌 기술자가 전동차 디자인을 하여 아쉬운 점이 남는다. 앞으로 도입하는 첨단기술과 열정으로 이룬 전기동차(이하 전동차), 수십 대의 전동차를 동시에 여객 영업운전은 안전운행을 위한 열차운영내규에 맞추어야 하는 등 까다로운 점이 있고, 이것에 대한 면밀한 검토가 있어야 한다. 기존 전동차는 자동차처럼 메이커에 따라 비슷한 것과 종류와 특성이 조금씩 다르고, 그중 가장 보유량수가 많고, 높은 비중을 차지하고 있는 영국에서 기술 도입하여 대우에서 만든 GEC전동차의 전동차 순기능 대책강화방안을 논하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.487-494
• /
• 1999

The object of this study is to reduce the subway noise by the low noise wheel. The vibro-acoustic reduction was predicted from the FRF difference between low noise wheel and solid wheel by experimental modal analysis. The low noise wheel and solid wheel were compared in viewpoint of car interior/exterior noise. The effect of low noise wheel on the noise of subway train of 6 vehicles was obtained. But, the application of low noise wheel must be reviewed in some aspect.

• 한국입자에어로졸학회지
• /
• 제11권1호
• /
• pp.21-28
• /
• 2015

In this study, the flow around a subway train running in an underground tunnel was numerically estimated. For the validation of the numerical results, the airflow velocity at a point underneath a subway train was measured using an ultrasonic anemometer. Then, the trajectories of particles generated at the contact points between the wheels and rails were numerically predicted. By considering the airflow velocity and particle trajectories, the space underneath the T-Car (trailer car) was expected to be appropriate for the room for the installation of a dust-removal system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.695-700
• /
• 2006

Kimhae light subway started complete unmanned operation electromotive car starting construction. It stepped on the first step which approaches at time of the unmanned operation electromotive car there is a possibility of doing. During the 30 years, the electromotive car market of domestic developed. Finally we will start into a plan and a production for the initial commerce operation. The Canada unmanned operation electromotive car which we are advancing, It means becomes the good example in the relation technical experts

• 대한환경공학회지
• /
• 제27권11호
• /
• pp.1193-1197
• /
• 2005

사람의 귀에 들리지 않는 초저주파음을 비롯하여 200 Hz 이하의 저주파소음은 순환기, 호흡기, 신경, 내분비 등 사람의 생리에 영향을 미치는 것으로 알려져 있다. 이에 몇몇 국가들은 나름대로 저주파소음의 측정법과 평가 기준안을 마련한 상태이다. 본 연구에서는 대중교통 수단인 서울지하철을 대상으로 객차 내와 승강장에서의 저주파소음레벨과 스펙트럼을 조사하였다. 측정결과 객차 내 소음레벨은 지하철 운행속도와 곡선구배 등에 따라 차이는 있었으나, 주파수 $1{\sim}200\;Hz$ 대역에서 $60{\sim}105\;dB$로 나타났다. 특히 8 Hz에서의 소음 피크 값은 객차의 길이에 대한 공명주파수에 해당됨을 알 수 있었다. 승강장에서의 소음은 객차 내 소음보다 상대적으로 소음레벨이 낮게 측정되었는데 이것은 차량 도착 혹은 출발 시의 속력이 운행 시의 속력보다 낮기 때문으로 판단된다. Ochiai의 소음에 의한 인체영향 연구를 고려할 때, 객차 내 소음은 주파수 $20{\sim}80\;Hz$ 구간에서 압박감을 줄 수 있기 때문에 주목할 필요가 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.941-946
• /
• 2006

It followed in system development and SMRT(Seoul Metropolitan Rapid Transit Co)System reached to an automatic train operation(ATO) and driverless operation(DLM) from the manual operation due to the train driver. The train like the general bus or the car vehicle was not serial riding in a car and the Parallel concept which the numerous passenger rides in a car simultaneously occur frequently the charge of the train driver unmanned bitterly from existing manual handling was a possibility of doing, train open door control(ODM) which bites also ATO, it handles it minimized. Like this ATO/DLM, the control system which bites being a Wayside to Train communication for immediacy, it is a system of the Vital concept the immediacy of the citizen Data evil the radio information transmission and the train of the interface which is accurate from unmanned operation and, will decipher, will accomplish it will guarantee. It respects the passenger accident prevention and an air question environment improvement from subway platform and phul leys the screen door of Platform(PSD) with the fire tube frost it refers and part it treats and to sleep it does, ODM which bites is accuracy and immediacy of altitude and when seeing from the viewpoint which demands the trust of altitude, ODM system the trust of car incest interface in the equipment construction which is safe and the comparative analysis back of the system analysis against the control which bites and case study and other subway system it leads from the research which it sees and signal - train in base grudge to sleep it contributes it does.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.364-369
• /
• 2014

To assess the wear behavior of rails against subway rail car wheels, we investigate the sliding wear behavior of pins derived from two types of rails (normal rails and heat-treated rails) against a disc derived from a subway rail car wheel, using a pin-on-disc-type tribometer. We base the sliding wear test conditions on the sliding conditions for wheel flange-rail gauge corner contact. We demonstrate the remarkable transition in the wear behavior of the pins derived from the rails, from severe wear to mild wear, as a function of the sliding distance. The wear rate of the heat-treated rail material in the running-in wear region is much lower than that of the normal rail material. Furthermore, the wear rates of the pins in the running-in wear region decrease with increasing hardness and with decreasing sliding speed. However, there is little difference between the heat-treated rail pin and the normal rail pin in the wear rate in the steady-state wear region. Stricter controls on the decarburized layer beneath the surface of rails are required to reduce the wear rate in the running-in wear region.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1378-1387
• /
• 2011

Seoul Metropolitan Rapid Transit Corporation - which is operating the subway lines No. 5, 6, 7 and 8 of Seoul's subway - has been operating a variety of motor cars and rail inspection vehicles to transport workers and materials into the tunnel at night after the daily revenue service for the maintenance of tunnel structure and track. However, the air quality in tunnels has been contaminated due to the operation of diesel engine cars, and rail inspection vehicles are now having higher chances of risks since the lightweight vehicles made with aluminum bogie became too obsolete. In this study, MRT type eco-friendly electric multi-inspection car has been elaborated for the purpose of improvement of tunnel environment and replacement of motor cars and rail inspection vehicles.