• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.202-211
• /
• 2018

In this work, Fe-Pd alloy films have been electrodeposited on different substrates using an electrolyte containing $[Pd(NH_3)_4]^{2+}$ (0.02 M) and $[Fe-Citrate]^{2+}$ (0.2 M). The influences of substrate and overpotential on chemical composition, nucleation and growth kinetics as well as the electrodeposited films morphology have been investigated using energy dispersive X-ray spectroscopy (EDS), current-time transients, scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) patterns. In all substrates - brass, copper and sputtered fluorine doped tin oxide on glass (FTO/glass) - Fe content of the electrodeposited alloys increases by increasing the overpotential. Also the cathodic current efficiency is low due to high rate of $H_2$ co-reduction. Regarding the chronoamperometry current-time transients, it has been demonstrated that the nucleation mechanism is instantaneous with a typical three dimensional (3D) diffusion-controlled growth in the case of brass and copper substrates; while for FTO, the growth mode changes to 3D progressive. At a constant overpotential, the calculated number of active nucleation sites for metallic substrates is much higher than that of FTO/glass; however by increasing the overpotential, the number of active nucleation sites increases. The SEM micrographs as well as the XRD patterns reveal the formation of Fe-Pd alloy thin films with nanostructure arrangement and ultra-fine grains.

• 한국재료학회지
• /
• 제20권5호
• /
• pp.241-245
• /
• 2010

One of the weak points of the Cr-doped SZO is that until now, it has only been fabricated on perovskite substrates, whereas NiO-ReRAM devices have already been deposited on Si substrates. The fabrication of RAM devices on Si substrates is important for commercialization because conventional electronics are based mainly on silicon materials. Cr-doped ReRAM will find a wide range of applications in embedded systems or conventional memory device manufacturing processes if it can be fabricated on Si substrates. For application of the commercial memory device, Cr-doped $SrZrO_3$ perovskite thin films were deposited on a $SrRuO_3$ bottom electrode/Si(100)substrate using pulsed laser deposition. XRD peaks corresponding to the (112), (004) and (132) planes of both the SZO and SRO were observed with the highest intensity along the (112) direction. The positions of the SZO grains matched those of the SRO grains. A well-controlled interface between the $SrZrO_3$:Cr perovskite and the $SrRuO_3$ bottom electrode were fabricated, so that good resistive switching behavior was observed with an on/off ratio higher than $10^2$. A pulse test showed the switching behavior of the Pt/$SrZrO_3:Cr/SrRuO^3$ device under a pulse of 10 kHz for $10^4$ cycles. The resistive switching memory devices made of the Cr-doped $SrZrO_3$ thin films deposited on Si substrates are expected to be more compatible with conventional Si-based electronics.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.33-38
• /
• 2015

In this study, flat-type photocatalytic reaction system is applied to reduce toxic hexavalent chromium (Cr(VI)) to trivalent chromium (Cr(III)) in aqueous solution under UV irradiation. To overcome the limitation of conventional photocatalysis, a novel approach toward photocatalytic system for reduction of hexavalent chromium including nanotubular $TiO_2$ (NTT) on two kinds of titanium substrates (foil and mesh) were established. In addition, modified Ti substrates were prepared by bending treatment to increase reaction efficiency of Cr(VI) in the flat-type photocatalytic reactor. For the fabrication of NTT on Ti substrates, Ti foil and mesh was anodized with mixed electrolytes ($NH_4F-H_2O-C_2H_6O_2$) and then annealed in ambient oxygen. The prepared NTT arrays were uniformly grown on two Ti substrates and surface property measurements were performed through SEM and XRD. Hydraulic retention time(HRT) and substrate type were significantly affected the Cr(VI) reduction. Hence, the photocatalytic Cr(VI) reduction was observed to be highest up to 95% at bended(modified) Ti mesh and lowest HRT. Especially, Ti mesh was more effective as NTT substrate in this research.

• Journal of Magnetics
• /
• 제9권4호
• /
• pp.116-120
• /
• 2004

Hexagonal barium-ferrite ($BaFe_{12}O_{19}$, magnetoplumbite structure; BaM) film with perpendicularly c-axis orientation was successfully deposited on (100) silicon substrates with an MgO (111) underlayer by rf diode sputtering and in-situ heating at $920^{\circ}C$. The magnetic and structural properties of 0.27 ${\mu}m$ thick BaM films on MgO (111) underlayers were compared to films of the same thickness deposited onto single-crystal MgO (111) and c-plane ($000{\ell}$) sapphire ($Al_2O_3$) substrates by vibrating sample magnetometry (VSM), x-ray diffractometer (XRD), and atomic force microscopy (AFM). The thickness dependence of MgO (111) underlayers on silicon wafer was found to have a large effect on both magnetic and structural properties of the BaM film. The thickness of 15 nm MgO (111) underlayers produced BaM films with almost identical magnetic and structural properties as the single-crystal substrates; this can be explained by the lower surface roughness for thinner underlayer thicknesses. The magnetization saturation ($M_s$) and the ratio $H_{cII}/H_{c{\bot}}$ for the BaM film with a 15 nm MgO (111) underlayer is 217 emu/cc and 0.24, respectively. This is similar to the results for the BaM films deposited on the single-crystal MgO (111) and sapphire substrates of 197 emu/cc and 0.10, 200 emu/cc and 0.12, respectively. Therefore, the proposed MgO (111) underlayer can be used in many applications to promote c-axis orientation without the cost of expensive substrates.

• 약학회지
• /
• 제45권1호
• /
• pp.46-54
• /
• 2001

Protein carboxyl Ο-methylation is a kind of enzymatic reaction producing carboxyl methylester catalyzed by protein carboxyl Ο-methyltransferases at the carboxyl group of amino acid residues in polypeptide. Since the finding of carboxyl methylesterl many studies have been focused on the under-standing of biological functions in eukaryotes but still not clear except for roles in Ras attachment to membrane and protein repair. In this study, we investigated the protein carboxyl methylation in porcine liver and testis in respect of identification and characterization of carboxyl methylesters and natural proteinous substrates using pH stability of the esters and electrophoresis under acidic and basic conditions. We detected several kinds of methyl esters, 3 kinds each in cytosolic fractions from liver and testis. Under the treatment of strong acid and base, the ratio between base-stable substrates and unstable ones in liver (4 : 6) was different from the ratio obtained in testis (6 : 4). The methyl accepting capacities were affected by enzymatic proteolysis between the range of 55 to 65% in liver and of 35 to 45% in testis. Separation of the methylated proteins by acidic electrophoresis in the presence of urea and SDS revealed distinctively natural substrates of 26, 33 and 80 kD in the cytosol from liver and of 14, 25, 32 and 86 kD from testis. Most of the labelling, however were lost following electrophoresis under moderate alkaline condition, except for molecules of newly detected 7 and 17 kD in livers and 15, 29, 40 and 80 kD in testis. From these results, it was proposed that protein carboxyl Ο-methylation in each organs may be catalyzed by different classes of protein carboxyl Ο-methyltransferases. In addition, it is suggested that the protein carboxyl methylation in liver and testis may have different patterns in respect of natural substrates.

• 농업과학연구
• /
• 제40권3호
• /
• pp.203-208
• /
• 2013

Differences in the filling amount of substrates in container can influence severely on the soil physical properties and crop growth. This research was conducted to secure the fundamental informations related to the changes in soil physical properties as influenced by the filling amount of coir dust-based substrates in container. For the experiment, three substrates were formulated by blending coir dust (CD) with expanded rice hull (CD+ERH, 8:2, v/v), carbonized rice hull (CD+CRH, 6:4, v/v) or ground and aged pine bark (CD+GAPB, 8:2, v/v). Based on the optimum bulk density, the amount of substrates filled in 347.5mL aluminum cylinder were adjusted to 90, 100, 110, 120, and 130%. Then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) by various filling amounts were measured. The TP decreased linearly in CD+ERH and CD+GAPB and quadratically in CD+CRH as the filling amounts of the media increased from 90% to 130%. The CC in CD+ERH and CD+GAPB media increased as the filling amount increased from 90% to 120%, then decreased in 130%, showing quadratic change. The CC in CD+CRH was the highest in 90% filling amount and decreased gradually as the filling amount of root medea increased. The AFPs in CD+ERH and CD+GAPB media were 38 and 37%, respectively in 90% filling amount and they decreased drastically until 110% filling, then gradually in 120 and 130% filling amount showing the quadratic changes. The AFP of CD+CRH at 90% filling amount was 22% and it decreased as the filling amount increased until 130%, showing linear change. These results indicate that the increase in filling amount of substrates influenced more severely the AFP than CC, and careful consideration on container filling is required to provide a better root condition thus maximize crop growth.

• 한국균학회지
• /
• 제17권2호
• /
• pp.57-65
• /
• 1989

Cellulose와 hemicellulose의 단일 유도기질과 그 혼합물을 이용하여 Aspergillus nidulans의 섬유질 분해효소계의 유도 특이성을 조사하였다. 섬유질 분해효소계의 생합성에 있어서 최적의 유도기질이 endoglucanase의 경우엔 carboxymethylcellulose, ${\beta}-glucosidase$는 cellobiose, 그리고 endoxylanase와 ${\beta}-xylosidase$는 xylan으로 알려져 왔으나 이들 단일기질보다 기질들의 혼합물 특히 CMC-xylan과 CMC-xylan-laminarin of cellulase와 xylanase complexes의 생합성을 증가시키는데 매우 효과적인 것으로 나타났다. 이것은 각각의 유도기질에 따른 endoglucanase와 ${\beta}-glucosidase$ 그리고 endoxylanase의 components 양상 및 비교 활성도 변화에 기인하는 것으로 polyacrylamide gel 전기영동과 활성염색의 결과에서도 나타났다. 섬유소 분해효소계 생합성을 위한 유도물질의 이와 같은 공조효과는 Aspergillus nidulans에서 Cellulose와 xylanase systems의 생합성 조절이 유도물질에 의한 효소의 유도 수준에서 상호 관련되고 있음을 시사한다.

• 한국식품과학회지
• /
• 제28권2호
• /
• pp.212-219
• /
• 1996

Maillard 반응중 피질의 변화를 4차원 반응표면으로 나타내어 기질의 동적변화를 모니터링하고자 하였다. Total amino acids의 함량변화에 대한 회귀분석 결과 높은 $R^2$ (0.9470)를 나타내었으며, 각각의 amino acid또한 높은 R'를 나타내어 대부분 유의성이 인정되었다. 유리당의 함량에 대한 회귀분석에서 glucose의 함량에 대한 R'는 0.9250이었으나 fructose에 대한 $R^2$는 0.6490으로 낮은 값을 보였다. Maillard반응중 total amino acids의 함량은 반응온도가 높고 용매의 pH값 이 증가할수록 크게 감소되었다. 반응생성물의 갈색도는 반응온도가 증가할수록 증가하나 145‘C 내외에서 최대값을 나타내었다. 각각의 amino acid함량변화는 total amino acids 함량인화와 유사한 경향이었으며, 4차원 반응표면분석 결과 aspartic acid, threonine, glucose등의 기질들은 복합기질계 Maillard반응에 있어서 특이하게 반응온도가 증가할수록 크게 감소한 반면, 용매의 pH와 반응시간의 영향은 거의 받지 않는 것으로 나타났다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.35-43
• /
• 2001

Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers. Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of $SiO_2filler$ to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. Our results indicate that the electrical performance of ACF combined with electroless Wi/Au bump interconnection is comparable to that of solder joint.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.63-70
• /
• 2020

본 논문에서는 35 GHz 대역의 군 탐색기용 송수신 모듈을 설계 및 제작하였다. 밀리미터파 대역의 기판 성능과 집적도를 높이기 위해, 4층 액정 폴리머 기판을 개발하였다. 4층 액정 폴리머 기판은 3장의 FCCL 기판과 2장의 접착층으로 구현되었으며, 적층을 위해 기판간의 녹는 점 차이를 이용한 공정을 이용하였다. 스트립선로와 마이크로스트립 선로를 이용하여 기판의 길이에 따른 전송손실을 확인하였고, 35 GHz 대역의 전력분배기를 통해 액정폴리머 기판의 성능을 검증하였다. 이러한 기판을 이용하여 전력증폭기와 저잡음증폭기와 같은 송수신모듈을 구성하는 개별 블록에 대한 성능을 확인한 후, 단일 채널 Ka대역 송수신모듈을 4층 액정 폴리머 기판을 이용하여 개발하였다. 제작한 송수신모듈의 송신출력은 펄스 Duty 10%에서 1.1W 이상, 수신 잡음지수는 8.5 dB 이하, 수신 이득은 17.6 dB 이상의 수신 특성을 갖는다.