• 한국표면공학회지
• /
• 제33권2호
• /
• pp.115-125
• /
• 2000

TiN films were deposited onto Stellite 6B alloy (Co base) by the reactive magnetron sputter ion plating. As the bias increases, TiN film changes from columnar structure to dense structure with great hardness and smooth surface due to densification and resputtering by ion bombardment. The content of oxygen and carbon impurities in the TiN film decreases greatly when the substrate bias is applied. The preferred orientation of the TiN films changes from (200) to (111) with decreasing $N_2$/Ar ratio, and from (200) to (111) and then (220) with increasing the substrate bias. The change of the preferred orientation is discussed in terms of surface energy and strain energy which are related to the impurity contents and the ion bombardment damage. The hardness of the TiN film increases with increasing compressive stress generated in the film by virtue of ion bombardment. It becomes as high as up to 3500kgf/mm$^2$ when an appropriate substrate bias is applied.

• Applied Microscopy
• /
• 제24권4호
• /
• pp.123-131
• /
• 1994

In this study the initial stage nucleation and growth of Ni silicide on (001) Si by evaporation and furnace annealing have been investigated by transmission electron microscopy. The pressure was $10^{-6}$ Torr during evaporation and annealing. And the annealing temperature to produce $NiSi_2\;was\;800^{\circ}C$. From the evaporated film, $NiSi_2$ nucleus has grown into Si substrate with an epitaxial orientation relationship. Interfaces between $NiSi_2$ and Si were A-type {111} interfaces and {100} $NiSi_2$ interfaces were also observed at the initial stage of nucleation. Ni silicide grew into Si substrate, but the nucleus partly grew into the evaporated film, with no facets, from the nuclei in the Si substrate. $NiSi_2$ nucleus with (111) habit planes was also observed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.151-154
• /
• 1999

ZnO thin films on glass substrate were deposited by RF magnetron reactive sputter with various argodoxygen gas ratios and substrate temperatures. Crystallinities, surface morphologies, chemical compositions, and electrical properties of the films were investigated by XRD, SEM, XPS and electrometer(keith1ey 617). All films showed a strong prefered orientation along the c-axis on glass substrate, and the chemical stoichiometry was obtained at Ar/$O_2$=50/50. The propagation velocity of ZnO SAW filter was about 2, 590 dsec and insertion loss was a minimum value of about -21dB.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.324-327
• /
• 2000

ZnO(Zinc Oxide) thin films were deposited on glass substrate by Facing Targets Sputtering. Facing Targets Sputtering system can deposit thin films in plasma-free situation and change the sputtering conditions in wide range. The characteristics of ZnO thin films deposited at variation of sputtering conditions films thickness, power and substrate temperature were evaluated by XRD(x-ray diffractometer), ${\alpha}$-step (Tencor). The excellently c-axis oriented ZnO thin films were obtained at sputter pressure ImTorr, power 150W, substrate temperature 200$^{\circ}C$. In these conditions, the rocking curve of ZnO thin films deposited on glass was 3.3$^{\circ}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.131-135
• /
• 2003

Zinc Oxide(ZnO) thin films on Si (100) substrate were deposited by RF magnetron sputter with changing sputtering conditions such as argon/oxygen gas ratios, RF power, and substrate temperature, chamber pressure and target-substrate distance. To analyze a crystallographic properties of the films, $\theta/2\theta$ mode X-ray diffraction, SEM, and AFM analyses. C-axis preferred orientation, resistivity, and surface roughness highly depended on $Ar/O_2$ gas ratios. The resistivity of ZnO thin films rapidly increased with increasing oxygen ratio and the resistivity value of $9{\times}10^7{\Omega}cm$ was obtained at a working pressure of 10 mTorr with $Ar/O_2$=50/50. The surface roughness was also improved with increasing oxygen ratio and the ZnO films deposited with $Ar/O_2$=50/50 showed the excellent roughness value of $28.7{\AA}$.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.401-405
• /
• 1999

Reflective silver films with high quality were prepared on polyester substrate by using sputter deposit on techniques. Best reflectivity thin films of silver were produced with process parameters of $10^{-6}$ Torr as base pressure, 50 W as R.F. power, 5 mTorr as working pressure, and 10 sccm as Ar flow rate. Being deposited with an R.F. power of 50 W, Ag films revealed the highest 96.3 % reflectance as illuminated with a light of 700 nm wavelength. The adhesion of sample films showed as high as 14 to $20{\;}kg/\textrm{cm}^2$, which is suitable for industrial purposes. Their film crystallinity and orientation resulted in the planes of (111) and (200) for the growth with a preferred orientation of <111>, in general. The cross-sections of thin film specimens showed columnar structures. It is noted that columns became coarsened and less dense as R.F. power increased, resulting in a low reflectivity for the product film.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.78-85
• /
• 2012

Aluminum nitride(AlN) is a compound (III-V group) of hexagonal system with a crystal structure. Its Wurzite phase is a very wide band gap semiconductor material. It has not only a high thermal conductivity, a high electrical resistance, a high electrical insulating constant, a high breakdown voltage and an excellent mechanical strength but also stable thermal and chemical characteristics. This study is on the preferred orientation characteristics of AlN thin films by reactive evaporation using $NH_3$. We have manufactured an AlN thin film and then have checked the crystal structure and the preferred orientation by using an X-ray diffractometer and have also observed the microstructure with TEM and AlN chemical structure with FT-IR. We can manufacture an excellent AlN thin film by reactive evaporation using $NH_3$ under 873 K of substrate temperature. The AlN thin film growth is dependent on Al supplying and $NH_3$ has been found to be effective as a source of $N_2$. However, the nuclear structure of AlN did not occur randomly around the substrate a particle of the a-axis orientation in fast growth speed becomes an earlier crystal structure and is shown to have an a-axis preferred orientation. Therefore, reactive evaporation using $NH_3$ is not affected by provided $H_2$ amount and this can be an easy a-axis orientation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1098-1101
• /
• 1995

NbTi thin films were prepared on Si wafer and Cu substrate by rf magnetron sputtering in the range of sputtering pressure $3{\times}10^{-2}$torr to $3{\times}10^{-4}$torr at room temperature. The influence of sputtering pressure and substrate type on crystallographic orientation and morphology of NbTi thin films was investigated by using X-ray diffraction(XRD) and scanning electron microscopy(SEM), respectively. And the effect of crystallographic orientation and morphology of NbTi film on electromagnetic behaviors was estimated by measuring critical current in various applied magnetic field. The film morphology changed from porous structure consisting of tapered crystallites to densely deposited film decreasing with sputtering pressure. The change of crystallographic orientation with the sputtering pressure and rf power was calculated from the texture coefficient of(002) plane based on XRD patterns. It was found that a change of texture coefficient of(002) plane increased with decreasing sputtering pressure. From observation of critical current in various applied magnetic field, we have identified that the change of critical current abruptly decrease applying with magnetic field and NbTi film produced at high sputtering pressure does not exhibit superconductivity but at low sputtering pressure shows superconductivity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.103-106
• /
• 2002

We prepared $Co_{77}Cr_{20}Ta_{3}$ thin film with Facing Targets Sputtering Apparatus. which can deposit a high quality thin film CoCrTa magnetic layer for Perpendicular magnetic recording media. In order to obtain Good Crystal orientation of CoCrTa thin films. We prepared Thin Films on slide glass substrate. The thickness of Buffer-layer were varied from 10 to 50 nm and Magnetic layer thickness fixed 100[nm]. input current was varied from 0.2[A] to 0.5[A]. Substrate temperature was varied from room temperature to ${250^{\circ}C}$ respectively. The crystal orientation of the CoCrTa film were examined with XRD. Introduce Buffer-layer thin films showed improvement of dispersion angle of c-axis orientation (${\Delta\theta}_{50}$).

• 해양환경안전학회지
• /
• 제17권2호
• /
• pp.155-160
• /
• 2011

현재 지구온난화 등의 환경문제로 인해 각종 산업분야에서 정량화에 대한 요구가 증대되어 해양산업에도 그 수요가 증가하고 있는 실정이다. 따라서 본 연구에서는 차세대 경량화 재료인 마그네슘이 활용되기 위해서 반드시 극복해야할 가장 중요한 특성인 내식특성에 대하여 고찰하고, 그 내식특성 향상을 위한 마그네슘 박막의 Morphology나 결정배향성의 영향을 해명하고자 하였다. 실험결과로부터 제작한 Mg 박막의 전기화학적 내식특성은 Ar 가스압이 높은 조건에서 제작한 막일수록 내식특성이 우수하였다. 이러한 경향은 표면 및 단면의 Morphology와 결정배향성과의 상관관계를 통하여 설명 가능하였다.