• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1069-1074
• /
• 2007

TRIZ is innovative problem solving methodology. It can solve problems by systematical and convergent method, not by the existing divergent method like 'Brainstorming'. In this paper, TRIZ is used for reduction noise from gear in transmission. In order to reduce gear noise, design resources is derived first. According to the derived idea, level and function of system can be defined. After that, we suggest a way to reduce the noise from gear in transmission using 40 Principles and Substance-field analysis of TRIZ.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.235.2-236
• /
• 2002

The alkylphenols, chlorophenols and bisphenol A were determined by gas chromatography/mass spectrometry-selected ion monitoring mode followed by three work-up methods for comparison: EPA method, isoBOC derivatization method and TBDMS derivatization method. Eleven phenols in water samples were extracted with dichloromethane. (omitted)

• 약학회지
• /
• 제33권3호
• /
• pp.203-205
• /
• 1989

A method is presented for calculating the $^{13}C$ chemical shifts produced in liquid solution by referenced relative to RF frequency. The method is useful to get the real variations of chemical shifts in magnetic field by eliminating the affects of the variation of a reference substance.

• 자동차안전학회지
• /
• 제11권1호
• /
• pp.23-29
• /
• 2019

Recently, use of composite materials has been increasing for body structures and chassis parts in the car industry because of weight reduction effect and excellent mechanical thermal characteristics. However, application of composite materials in brake system is very difficult because it is hard to obtain enough brake performance due to low heat storage capacity of the composite materials. In this paper, we will present new carbon ceramic composite disc with high flow characteristic. To obtain this characteristic, new vent structures were designed by using ARIZ method and substance-field model analysis. The flow effect of these vent structures on the brake performance was verified by pugh matrix and cooling test. The test results show improvement of cooling performance up to $30^{\circ}C$. Finally, These results will improve brake the reliability of the brake performance for the high performance vehicles and electric vehicles.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.347-350
• /
• 2001

A typical Mold method is to form a gate electrode, a gate oxide, and emitter tip after fabrication of mold shape using wet-etching of Si substrate. In this study, however, new Mold method using a side wall space structure is used in order to make sharper emitter tip with a gate electrode. Using LPCVD(low pressure chemical vapor deposition), a gate oxide and electrode layer are formed on a Si substrate, and then BPSG(Boro phospher silicate glass) thin film is deposited. After, the BPSG thin film is flowed into a mold as high temperature in order to form a sharp mold structure. Next TiN thin film is deposited as a emitter tip substance. The unfinished device with a glass substrate is bonded by anodic bonding techniques to transfer the emitters to a glass substrate, and Si substrate is etched using KOH-deionized water solution. Finally, we made sharp field emitter array with gate electrode on the glass substrate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.198-200
• /
• 1997

This paper consider a simple Nondestructive Testing(NDT) having eddy currnt effect. We analyzed the two dimension modeling of alternative magnetic field. eddy current with voltage source. And, the current magnitude and phase data obtained from each different frequency five object position is used for learning the neural network. Therefore, we can recognize an object position pattern from new input current magnitude, phase data.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.491-497
• /
• 2010

The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has an aim for clean technology in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. This paper deals with mediocritizing magnetic polishing device into regular lathe and this experiment was conducted in order to get the best surface roughness at low cost. This paper contains the result of experiment to acquire the best surface roughness, not using the high-cost polishing material in processing. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

• Architectural research
• /
• 제25권2호
• /
• pp.29-40
• /
• 2023

The purpose of this study is to analyze the conflicts caused by the spatial expansion in two types of urban heritage in Seoul. To explain the national and professional orientation found in each spatial transformation, the study brought the concept of 'historic state' and 'epitome,' thereby examining the operating system of the conflicts. Field observations and stakeholder interviews were performed based on literature and historical research. The study results are as follows. ①In the case of Gwanghwamun and Donuimun, the spatial expansion is to find the historic state of the sites. Gwanghwamun with high national status and substance, conflicts show a pattern that spreads to memory conflicts. Donuimun is relatively unknown and has no substance so that a flexible method of digital restoration was applied. ② In the case of Ikseon-dong and Bukchon hanok, they show heterogeneous spatial expansion. The conflicts in relation to this is caused by the epitome of hanok. In Ikseon-dong, illegal installation of structures(non-epitome) is prevalent, while in Bukchon, there was a process of transferring the new basement(non-epitome) as part of the hanok. ③Conflicts in Gwanghwamun can be coordinated by referring to the digital restoration of Donuimun, and conflicts in Ikseon-dong can be resolved by taking Bukchon as a precedent.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.156-161
• /
• 2003

It is an interest problem to predict substance distributions in three-dimensional space. Recently, a research field as Geostatistics is advanced. It is a kind of inter- or extrapolation mathematically. Some useful means for the inter- and extrapolation are known, in which slide window method with neural networks is hopeful one. We propose multi-dimensional extrapolation using multi-layer neural networks and the slide-window method. The multi-dimensional extrapolation is not similar to one-dimension. It has plural algorithms. We researched line predictors and local-plain predictors I two-dimensional space. The both predictors are equivalent; however, in multi-dimensional extrapolation, it is very important to find the direction of predictions. Especially, since the slide window method requires information to predict the future in sampling data, if they are not ordered appropriately in the direction, the predictor cannot operate. We tested the extrapolation for typical two-dimensional functions, and found an excellent character of slide-window method based on local-plain. By using the method, we can extrapolate the function until twice-outer regions of the definitions.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1149-1154
• /
• 2010

Liquid chromatography/mass spectrometry using isotope dilution method has been established as a primary method for the measurement of cortisol in human serum. Verification of this method was accomplished by the participation in Consultative Committee for Amount of Substance-Metrology in Chemistry (CCQM) pilot study. Two levels of cortisol certified reference materials were prepared and certified by the established method. They were used as sample materials for the proficiency testing. The expanded uncertainty in the measurement of cortisol in human serum was approximately 1.2% at 95% confidence level. The results of the proficiency testing showed a good precision among the participants, but some bias to the certified values. This means that commercial field laboratories should keep traceability chain to SI unit through available reference measurement procedures and/or available reference materials.