• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.18-31
• /
• 1989

To analyze the impact of air pollution control on electricity generation cost, a computer program was developed. POGEN calculates levelized discounted power generation cost including additional air pollution control cost for coal power plant. Pollution subprogram calculates total capital and variable costs using governing equations for flue gas control. The costs are used as additional input for levelized discounted power generation cost subprogram. Pollution output for Rue Gas Desulphurization direct cost was verified using published cost data of well experienced industrialized countries. The power generation costs for the year 2001 were estimated by POGEN for three different regulatory scenarios imposed on coal power plant, and by levelized discounted power generation cost subprogram for nuclear power. Because of uncertainty expected in input variables for future plants, sensitivity and uncertainty analysis were made to check the importance and uncertainty propagation of the input variables using Latin Hypercube Sampling and Multiple Least Square method. Most sensitive parameter for levelized discounted power generation cost is discount rate for both nuclear and coal. The control cost for flue gas alone reaches additional 9-11 mills/kWh with standard deviation less than 1.3 mills/kWh. This cost will be nearly 20% of power generation cost and 40% of one GW capacity coal power plant investment cost. With 90% confidence, the generation cost of nuclear power plant will be 32.6-51.9 mills/kWh, and for the coal power plant it will be 45.5-50.5 mills/kWh. Nuclear is favorable with 95% confidence under stringent future regulatory requirement in Korea.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.68-74
• /
• 1985

In this Paper, we present a non-doglegging channel routing system for If layout using standard cells. This system produces a final two-layer wiring pattern in the horizontal track between two rows, each of which is a linear placement of standard cells of identical heights, satisfying the given net list specification. The layout of CMOS cell library Including nine primitive cells used in this paper is represented in CIF (Caltech Intermediate Form) using λ(Lambda) of 2 microns in Mead-Conway layout representation scheme. The cell dimension and 1/0 characteristics such as name, position and layer type of the pins are stored in Component Library to be used in the channel routing progranl, CROUT. 4 subprogram, NET-PLOT, was used to report a schemdtic layout result, and another subprogram, NETCIF was used to with a full-fledged final layout representation in GIF, A test run for realizing a dynamicmaster-slave D flip-flop with set/reset using primitive cells was shown to take 4 CPU seconds on VAX 11/780.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.86-98
• /
• 1983

본 연구는 미국의 사료공장 중 주종을 이루고 있는 형식을 분석하여 일반적인 Model로 개발하였고 이 Model을 설계할 수 있는 Computer Program을 개발하였다. Model에 적용된 규모는 10ton/hr로부터 50ton/hr이었고 종류는 돼지 및 닭 사료공장과 완전히 pellet화된 소 사료공장이었다. 개발된 Computer Program은 1개의 Main Program과 3개의 Subprogram으로 구성되어 있고 29개의 Input data을 사용하게 되어 있다. 이 Computer Program의 output은 다음과 같다. 1. 공장의 Dimension 2. 곡물저장 및 원료 bin의 수량 및 규모 3. 각 기계의 규모 및 성능 4. 총 작업시간 및 전기 소요량 위와같은 사료공장의 일반화 된 Model 및 이를 설계하기 위한 Computer Program은 사료 생산의 소요동력, 노동력 및 투자자본까지 추정할 수 있게 하였으며 이 분야에서 학문적으로 처음 시도하여 본 것이다.

• Journal of Korean Society for Quality Management
• /
• v.11 no.2
• /
• pp.10-17
• /
• 1983

The former paper (Part I) studies two methods for searching and determining the simple paths in an acyclic or a cyclic network. The two methods are computer programmed as subroutines (SPLP1 and SPLP2) for various use. And a few examples of its applications are discussed Another paper (Par II) studies the reliability computation for a network by using the Event Space Methods. A computer program is developed for the computation by applying the SPLP2 subroutine subprogram. In this paper the former results are summarized with another computer program for reliability computation by using the Path Tracing Methods. The two subroutines appear in the Appendix as reference for others. The programs can be used in the reliability computation of reducible and irreducible structure networks.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.315-321
• /
• 1999

The railway signaling system consists of microcomputerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control, The software plays a major role in these microcomputer-based vital systems. Therefore it is important to design the software and validate the required levels of safety and reliability To verify the conditions and functions of signaling logic, the laboratory prototype test bench, which consists of personal computers, VME system and Ethernet LAN, will be developed. In this paper general design of signaling system test bench for high-speed rail is described and some developed subprogram is presented.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.157-167
• /
• 1996

A graphics system for optimum design(GOD) was developed for the various optimization programs. It is composed of a preprocessor and a postprocessor using the methods of pull-down and pop-up menus. The preprocessor of GOD system helps the designer to make a input file or a subprogram according to a selected optimization program. The postprocessor of the system display the numerical results generated during the iterative numerical analysis processes graphically in the graphic mode. Numerical examples as a mathematical linear problem and a 3-bar truss structure are presented to explain the use of GOD system. The system was programmed in one of the computer programming languages, Borland C.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.519-524
• /
• 2000

The goal of this research is the establishment of a connection of an existing water quality model to GIS. The water quality model investigated was the Water Quality Analysis Simulation Program (WASP5), while the actual linkage was performed using object-oriented programming. The runoff and the non-point source loadings into the Channel were determined using a grid-based model developed in GIS. Afterwards, scripts were written in the ArcView programming language, Avenue, in order for ArcView to perform the following tasks : 1) write the input file informations, 2) format the input information into the proper WASP5 file, 3) execute the WASP5 subprogram for modeling.

• The KIPS Transactions:PartA
• /
• v.10A no.1
• /
• pp.75-81
• /
• 2003

Many abstraction techniques are introduced in programming languages in order to facilitate the development, maintenance and extension of softwares. But several concepts and terms related to abstraction have not been uniformly defined and have been explained differently. Expecially in object-oriented paradigm strongly based on abstraction common consensus was not derived. In this paper, we analyse procedural abstraction, propose the taxonomy of procedural abstraction and show that procedural abstraction contains the concept of abstraction on abstraction in addition to the transformation of procedures into abstraction. We also explain polymorphism in the view of abstraction. These analysis and consideration will make it possible to understand procedural abstraction more intensively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.29-38
• /
• 2015

In this paper, scale efficiencies and relative efficiencies of R&D projects in Industrial Technology Program, sponsored by Ministry of Trade, Industry and Energy, Korea, are calculated and compared. For the process, various DEA (Data Envelopment Analysis) models are adopted as major techniques. For DEA, two stage input oriented models are utilized for calculating the efficiencies. Next, the calculated efficiencies are grouped according to their subprograms (Industrial Material, IT Fusion, Nano Fusion, Energy Resources, and Resources Technology) and recipient types (Public Enterprise, Large Enterprise, Medium Enterprise, Small Enterprise, Lab., Univ., and etc.) respectively. Then various subprograms and recipient types are compared in terms of scale efficiencies (CCR models) and relative efficiencies (BCC models). In addition, the correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies is calculated, from which the causal relationship between them can be inferred. Statistical analysis shows that the amount of input, in general, should increase in order to be scale efficient (CCR models) regardless of the subprograms and recipient types, that the 1st and 2nd stage relative efficiencies are different in terms of the programs and recipient types (BCC models), and that there is no significant correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies. However, the results should be used only as reference because the goal each and every subprogram has is different and the situation each and every recipient type faces is different. In addition, the causal link between the 1st stage relative efficiencies and the 2nd relative efficiencies is not considered, which, in turn, is the limitation of this paper.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.1
• /
• pp.18-24
• /
• 2003

B. mandarina of Korean population apparently differs B. mori in isozyme analysis. Fourteen polymorphism occurred B. mandarina not in B. mori at 6 isozymes, Bph, Bes, Amy-hc, Ies, Ict-D, Ict-E. Korean population has shared with the Korean native strain of B. mori in B genotype of Bes, F of Amy-hc, n of Ict-E, M and S of Ict-H. These 5 genotype were known that detection only Korean native strains of B. mori. Nei's genetic distance based on the genotype of isozyme and hemolymph protein using 4 populations of B. mandarina varied from 0.0350 to 0.0624. The distances of 0.0350 is between Jinju and Chilgok population and between Jinju and Kosung population has the largest distances, 0.0624. In genus of Bombyx, B. mandarina and B. mori, genetic distance varied from 0.3822 to 0.5074. Phylogenetic tree obtained using the subprogram UPGMA of NTSYS represented that Bombyx devided two group, B. mandarina and B. mori. B. mandarina has genetic differences according to the population within the Korean peninsula, but that was not recognized genetic variation or divergence considering low values of genetic distance.