• 제목/요약/키워드: Suboptimal

검색결과 436건 처리시간 0.059초

철분부족아동과 정상아동의 영양소 섭취량, 신체계측치, 식행동에 관한 비교연구 (A Comparative Study on Nutrient Intake, Anthropometric Data and Food Behavior in Children with Suboptimal Iron Status and Normal Children)

  • 손숙미;양정숙
    • 대한지역사회영양학회지
    • /
    • 제3권3호
    • /
    • pp.341-348
    • /
    • 1998
  • This study was performed to investigated the difference in the nutritional status of normal children and children with suboptimal iron status. Two hundred and sixty children from 5th grade were divided into 2 groups(normal group and suboptimal group) according to the hematologic parameters of iron(RBC count, hemoglobin, serum ferritin). Normal group was composed of 71 male and 81 female and suboptimal group was consisted of 65 male and 43 female. Fat percentage of children from suboptimal group was 18.9%, which was significantly lower than 22.1% of normal group(p<0.05). TST and MAC of suboptimal group were also lower than those of normal group(p<0.05). Mean intakes of energy, protein, thiamin, riboflavin, iron were lower than those in normal group(p<0.05). suboptimal female students showed 1197.6㎉ of energy intake(63.0% of RDA) and 0.56㎎ of thiamin intake(56% of RDA). Mean RBC count, hematocrit, hemoglobin, ferritin(p<0.01) and FEP(p<0.05) of suboptimal group were lower than those of normal group. Thirty-nine point seven percent of children from suboptimal group was observed with having gastrointestinal disease which was significantly higher than 22.1% of normal group. (Korean J Community Nutrition 3(3) : 341∼348, 1998)

  • PDF

연합형 칼만 필터를 이용한 차량항법시스템의 설계 (Design of a vehicle navigation system using the federated kalman filter)

  • 김진원;지규인;이장규
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.1348-1351
    • /
    • 1997
  • The federated Kaman filter(FKF) is being widely used in many multisensor navigatiion systems. It is know that the FKF has advantages of simplicity and fault-tolerance over other decentralized filter techniques. In this paper, optimal and suboptimal FKF configuratiions are mentioned and a covariance analysis technique for the suboptimal FKF is newly presented. The suboptimal FKF configuration, known as No-reset(NR) mode, has better fault tolerance capability than the optimal FKF coniguratioin. In the suggested technique, a suboptimal fusion process of FKF is considered a swell as suboptimal gains of local filters. An upper boun of error covariance for suboptimal FKF is derived. Also, it is mathematically shown that this bound is smaller thanexisting bound in the literatrue. A vehicle-navigaion system is designed using the FKF. In thissystem, a map constraing equation is introduced and used as a measurement equatioin of Kalman filter. Performance analysis is done by the suggested covariance analysis techniques.

  • PDF

안정도 여유를 고려한 준최적 $H_{2}$ 설계 기법 (On the suboptimal $H_{2}$ Design for Improved Stability Margin)

  • 박기헌
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.66-70
    • /
    • 1991
  • A mixed $H_{2}$ / H.inf. design methodology is suggested for a single-input-single-output system. Suboptimal $H_{2 }$ controllers stabilizing the closed loop system under the additive uncertainty are obtained. An extended Nevanlinna-Pick algorithm is used to obtain the suboptimal. controllers.s.

  • PDF

환형관내 유동에서의 항력감소를 위한 준최적 제어 (Suboptimal Control for Drag Reduction in Turbulent Pipe Flow)

  • 최정일;;성형진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.377-382
    • /
    • 2001
  • A suboptimal control law in turbulent pipe flow is derived and tested. Two sensing variables ${\partial}p/{\partial}{\theta}\;|_w\;and\;{\partial}{\upsilon}_{\theta}/{\partial}r\;|_w$ are applied with two actuations ${\phi}_{\theta}$ and ${\phi}_r$. To test the suboptimal control law, direct numerical simulations of turbulent pipe flow at $Re_r=150$ are performed. When the control law is applied, a $13{\sim}23%$ drag reduction is achieved. The most effective drag reduction is made at the pair of ${\partial}{\upsilon}_{\theta}/{\partial}r\;|_w$ and ${\theta}_r$. An impenetrable virtual wall concept is useful for analyzing the near-wall suction and blowing. The virtual wall concept is useful for analyzing the near-wall behavior of the controlled flow. Comparison of the present suboptimal control with that of turbulent channel flow reveals that the curvature effect is insignificant.

  • PDF

적콜라비 새싹채소 종자에서 분리한 Escherichia coli strain RC-4-D의 생장예측모델 (Mathematical modeling of growth of Escherichia coli strain RC-4-D isolated from red kohlrabi sprout seeds)

  • 최수연;류상돈;박병용;김세리;김현주;이승돈;김원일
    • 한국식품저장유통학회지
    • /
    • 제24권6호
    • /
    • pp.778-785
    • /
    • 2017
  • 본 연구는 시중 유통되고 있는 새싹채소 재배용 적콜라비 종자에서 분리한 E. coli strain RC-4-D의 생장예측모델을 개발하기 위해 수행되었다. 각 온도조건(10, 15, 20, 25, $30^{\circ}C$) 별로 적콜라비 중 E. coli strain RC-4-D 밀도 변화를 조사하였고 Baranyi model을 1차 생장예측모델로 이용하였고 각 온도별로 최대생장률(${\mu}max$)과 $10^{\circ}C$를 제외한 유도기(LPD) 값을 도출하였다. E. coli strain RC-4-D의 최대생장률에 대한 2차 생장예측모델로써 suboptimal Ratkowsky square-root, suboptimal Huang square-root, suboptimal Arrhenius-type 세 종류의 모델을 비교하였다. 모델 적합성 검정 결과, suboptimal Huang square-root 모델이 정확도가 가장 높고 suboptimal Ratkowsky square-root 모델이 편차가 가장 적은 것으로 나타났다. 종합적으로, RMSE가 0.100, $A_f$가 1.255, $B_f$가 0.999인 suboptimal Ratkowsky square-root 모델이 온도의 영향을 설명하는 가장 적합한 2차 생장예측 모델인 것으로 나타났다. 본 연구에서 개발한 모델은 적콜라비 새싹채소 생산에 있어서 E. coli의 생장을 예측하고 미생물 위해성평가를 수행하는데 활용될 것으로 기대된다.

저온배양에 따른 Lactobacillus acidophilus CT 01의 저장 및 건조에 대한 저항성 (Effect of Suboptimal Temperature Incubation on the Resistance of Lactobacillus acidophilus CT 01 to Storage and Drying)

  • 유근형;권일경;김거유
    • 한국축산식품학회지
    • /
    • 제25권1호
    • /
    • pp.92-97
    • /
    • 2005
  • 본 연구는 이유 전 자돈의 분변으로부터 분리·동정한 젖산균의 저온 배양에 따른 기초지식을 확보하고 이를 생균제 생산에 적용함으로써 제품내 젖산균의 생존력을 증대시키기 위해 실시하였다. 이유 전 자돈의 분변으로부터 분리·동정한 젖산균은 Lactobacillus acidophilus 1로 판명되었으며, 이를 L. acidophilus CT 01이라 명명하였다. 48시간 동안 저온 배양한 L. acidophilus CT 01은 배양온도가 22℃일 때 생장속도가 가장 느리게 나타났으나 배양 12시간 이후부터 생균수가 급격히 증가하기 시작하여 배양 36시간에 1.3×10/sup 9/ CFU/mL로 최대 생균수를 나타냈다. L. acidophilus CT 01을 저온 배양하여 12일간 4℃와 20℃에 저장한 결과 4℃에 저장한 경우 저온 배양한 처리구의 생존률이 90.30와 90.67%로 대조구(85.81%) 보다 높은 생존률을 나타냈으며(p<0.01), 20℃ 저장시 28℃에서 24시간 저온 배양한 처리구에서 가장 높은 생존률(82.67%)을 나타냈다(p<0.01). L. acidophilus CT 01의 냉동 내성은 저온 배양한 처리구가 대조구보다 생존률이 95.73와 97.34%로 높게 나타났다(p<0.01). L. acidophilus CT 01을 60℃에서 15분과 30분 동안 열처리하여 열저항성을 시험한 결과 22℃에서 저온 배양한 처리구의 생존률이 0.203와 0.108%로 대조구에 비해 높게 나타났다(p<0.01). L. acidophilus CT 01을 저온 배양하여 부형제에 30% 접종하고 50℃에서 12시간 건조하여 생존률을 조사한 결과 저온 배양한 처리구가 가장 높은 생존률을 나타냈다

Second Order Suboptimal Power Allocation for MIMO-OFDM Based Cognitive Radio Systems

  • Nguyen, Tien Hoa;Nguyen, Thanh Hieu;Nguyen, Van Duc;Ha, Duyen Trung;Gelle, Guilllaume;Choo, Hyunseung
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권8호
    • /
    • pp.2647-2662
    • /
    • 2014
  • This paper proposes an efficient and low complexity power-loading algorithm for MIMO-OFDM downlink based cognitive radio system that maximizes the sum rate of single secondary user (SU) under constraints on the tolerable interference thresholds between secondary user and primary user's frequency bands and the total transmission power. Our suboptimal algorithm is based on the $2^{nd}$ order interference tracking and nulling mechanism to allocate transmission power of the subcarriers among SU's scheme. The performance of our proposed suboptimal scheme is compared with the performance of the classical power loading algorithms, e.g., water filling, $1^{st}$ order interference tracking, nulling, and other suboptimal schemes. Numerical results show that our algorithm has low complexity but obtains a higher channel capacity than that of some previous suboptimal algorithms in some scenarios. We dedicate also that for a given interference threshold, the $2^{nd}$ order interference tracking mechanism has dynamic number of nulling position instead fixed number of nulling position.

Suboptimal control strategy in structural control implementation

  • Xu, J.Y.;Li, Q.S.;Li, G.Q.;Wu, J.R.;Tang, J.
    • Structural Engineering and Mechanics
    • /
    • 제19권1호
    • /
    • pp.107-121
    • /
    • 2005
  • The suboptimal control rule is introduced in structural control implementation as an alternative over the optimal control because the optimal control may require large amount of processing time when applied to complex structural control problems. It is well known that any time delay in structural control implementation will cause un-synchronized application of the control forces, which not only reduce the effectiveness of an active control system, but also cause instability of the control system. The effect of time delay on the displacement and acceleration responses of building structures is studied when the suboptimal control rule is adopted. Two examples are given to show the effectiveness of the suboptimal control rule. It is shown through the examples that the present method is easy in implementation and high in efficiency and it can significantly reduce the time delay in structural control implementation without significant loss of performance.

원관내 유동에서의 준최적 제어의 평가 (Assessment of Suboptimal Control in Turbulent Pipe Flow)

  • 최정일;;성형진
    • 대한기계학회논문집B
    • /
    • 제26권2호
    • /
    • pp.345-352
    • /
    • 2002
  • A suboptimal control law in turbulent pipe flow is derived and tested. Two sensing variables ∂p/∂$\theta$$\_$w/ and ∂v$\_$$\theta$/∂γ│$\_$w/ are applied with two actuations ø$\_$$\theta$/ and ø$\_$γ/. To test the suboptimal control law, direct numerical simulations of turbulent pipe flow at Re$\_$$\tau$/=150 are performed. When the control law is applied, a 13∼23% drag reduction is achieved. The most effective drag reduction is made at the pair of ∂v$\_$$\theta$/∂γ│$\_$w/ and ø$\_$γ/. An impenetrable virtual wall concept is useful for analyzing the near-wall suction and blowing. The virtual wall concept is useful for analyzing the near-wall behavior of the controlled flow. Comparison of the present suboptimal control with that of turbulent channel flow reveals that the curvature effect is insignificant.

표면온도 측정에 의한 아크용접공정의 부최적제어 (Suboptimal control of arc welding process using surface temperature measurement)

  • 부광석;조형석
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
    • /
    • pp.322-326
    • /
    • 1989
  • This paper describes design procedure of suboptimal control to minimize a performance index which is represented as sum of square output error and the heat input power in arc welding process. Heat input and temperature of a fixed point on the surface of the material are concerned as input and output of the process, repectively. The suboptimal control law considered here in is a proportional plus integral type and is implemented by using only the output variables available from sensor which is also optimally located in a fixed point w.r.t. a moving weld touch.

  • PDF