• Advances in concrete construction
• /
• v.16 no.3
• /
• pp.155-167
• /
• 2023

The penetrated chloride in concrete has different behavior with mix proportions and local exposure conditions, even in the same environments, so that it is very important to quantify surface chloride contents for durability design. As well known, the surface chloride content which is a key parameter like external loading in structural safety design increases with exposure period. In this study, concrete samples containing OPC (Ordinary Portland Cement), GGBFS (Ground Granulated Blast Furnace Slag), and FA (Fly Ash) had been exposed to submerged, tidal, and splash area for 5 years, then the surface chloride contents changing with exposure period were evaluated. The surface chloride contents were obtained from the chloride profile based on the Fick's 2nd Law, and the regression analysis for them was performed with exponential and square root function. After exposure period of 5 years in submerged and tidal area conditions, the surface chloride content of OPC concrete increased to 6.4 kg/m³ - 7.3 kg/m³, and the surface chloride content of GGBFS concrete was evaluated as 7.3 kg/m³ - 11.5 kg/m³. In the higher replacement ratio of GGBFS, the higher surface chloride contents were evaluated. The surface chloride content in FA concrete showed a range of 6.7 kg/m³ to 9.9 kg/m³, which was the intermediate level of OPC and GGBFS concrete. In the case of splash area, the surface chloride contents in all specimens were from 0.59 kg/m³ to 0.75 kg/m³, which was the lowest of all exposure conditions. Experimental constants available for durability design of chloride ingress were derived through regression analysis over exposure period. In the concrete with GGBFS replacement ratio of 50%, the increase rate of surface chloride contents decreased rapidly as the water to binder ratio increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.503-509
• /
• 2020

In offshore floating structures, the viscous mean drift force due to drag is considered a design part that has not been considered until recently. In this paper, an analytical solution for the viscous mean drift forces on a floating vertical cylinder considering the waves and currents was obtained. The area was considered by dividing it into a splash zone above the free surface and a submerged zone below the free surface. In the case of waves, only the splash zone was considered; in the case of waves and currents, equations were obtained in both the splash zone and the submerged zone. The RAO results of previous studies were used to compare the calculated results with the drift forces acting on the fixed cylinder. Except for the case in only waves in the splash zone, the viscous mean drift force acting on the floating cylinder was larger than the drift force acting on the relatively fixed cylinder in most frequencies. In particular, the increase was greater when the currents were considered to be more important. Therefore, these results provide the inference for the viscous drift force due to drag in the design of floating offshore structures.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.53-57
• /
• 2002

This is a study on the houses that will be submerged by the construction of hwa-buk dam. The purpose of this study is to record the folk houses that will be disappeared, and to make clear the regional characteristics of folk houses in this area. The type of site plan presents variously according to the location of several important factors. Types of site plan that are presented in this area are 4 (-, \ulcorner, equation omitted, - ), and \ulcorner, type is general. Types of houses according to the number of front room unit are 2. And 3room and 4 room type enlarge the living space by installing the toe-gan. In case of the 4 room-type is having Maru between rooms. The 3 room type shows superior distribution than the 4 room type.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.7-14
• /
• 2015

In this study transmembrane pressure (TMP) was measured with respect to operational time in order to estimate fouling of the submerged membrane in the membrane bioreactor(MBR). The microfiltration flat sheet module which has $0.02m^2$ of effective area and $0.15{\mu}m$ nominal pore size was submerged in the activated sludge solution of MLSS 5,000 mg/L. The permeate experiments were carried out simultaneously to compare TMP of the run/stop (R/S) with that of the sinusoidal flux continuous operation (SFCO). TMP for SFCO mode was up to 93% lower than that of R/S mode, and the effect of TMP drop reduced as permeate flux increased. Also, TMP of the SCFO mode was maintained below 40% of the limited operating TMP 55 kPa until the permeate operational time extended to longer than 5 times for the case as the coagulant $FeCl_3$ was dosed into the activated sludge solution with 500 mg/L concentration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2B
• /
• pp.109-119
• /
• 2011

In this study, the flow characteristics of Han River Estuary were investigated by using a two-dimensional numerical model according to the assumption of shift and modification of the Shingok submerged weir. The two-dimensional analysis has contributed to our understanding of the hydraulic effects induced by shift of the weir on the topography, especially wetlands. The tide and flow discharge of 2007 were adopted as an input data for the simulation. The tidal data contained both spring and neap tide, and the flow discharge condition was divided into monsoon and normal seasons. The boundaries of this study were Hangang Bridge, Tongil Bridge, and Yu island. The simulation results showed that influence area of seawater changed depending on the weir shift, and the water level at particular station fluctuated according to the condition of tide and flow discharge.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.147-147
• /
• 2017

Rice is one of the major staple food in Asia, covering around half of the world population. More than 40% of rice cultivation area are subject to abiotic stresses such as drought, submergence and phosphate deficiency. Pyramiding useful genes into elite variety is a promising strategy to develop tolerance varieties to multiple abiotic stresses. However, some genes are not functionally compatible when they are introgressed into the same elite variety. Here, we tested the functional compatibility of Sub1 and Pup1, major QTLs for tolerance to submergence and phosphate (P)-deficiency conditions, respectively. Phenotypic analysis revealed that IR64-Sub1 Pup1(SP1) plants harboring both Sub1 and Pup1 QTLs showed significant tolerance to submerged conditions, similarly in IR64-Sub1 (Sub1) plant, while SP1 plants failed to tolerate to P-deficiency conditions; only IR64-Pup1 (Pup1) showed strong P-deficiency tolerance phenotype. In submerged conditions, the expression levels of Sub1A and PSTOL1, major genes for Sub1 and Pup1 QTLs, respectively, were not significantly different in between Pup1 and SP1 plants. On the other hand, the expression of both Sup1A and PSTOL1 was significantly downregulated in P-deficiency conditions, suggesting that Sub1 and Pup1 repressed gene expression each other in P-deficiency conditions. These results suggest Pup1 does not compromise the Sub1 function in submerged conditions while Sub1 suppresses the function of Pup1 in (P)-deficient condition, possibly by regulating transcript level of Pup1. In conclusion, Sub1 and Pup1 are functionally compatible in terms of submergence tolerance but not in P-deficiency conditions. Further analysis need to be performed to elucidate how Sup1 suppresses the function of Pup1 in P-deficiency conditions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.105-114
• /
• 2006

Together with the trend of enhancement in domestic industrial development and economic progress due to import and export, the demand for construction of the roads, bridges, especially port facilities, and several coastal protection and ocean structures is increasing rapidly. MOMAF of Korean Government is driving construction of 9 new ports and renovation of the existing fishery ports. Among these structures most of bridge base, wharves, dolphins, quays, and jetties are being newly built of steel or concrete pile. As the base, supporting bulkheads, and piles are underwater after construction, it is difficult to figure out the status of structures and not enough to get maintenance and strengthen the structures. Every year, moreover, these works suck the government budget due to higher incomplete maintenance expense for protection from corrosions of structures and increased underwater construction period. for the purpose of cutting down the government budget, it is necessary to extend the life cycle of the existing structures. We developed a new method for maintenance of submerged structures near the waterline by allowing dry work environment with the floating caisson. The method shows easy to move around the working area and handle. It also showed not only a significant reduction of maintenance expenses and time for anti-corrosion work but also better protection. This will be a milestone to reduce the maintenance and construction expenses for the shore and water structures.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.25-39
• /
• 2012

This study was aimed to assess the effects of additional installation of two different types of weirs, one is a curtain-type weir and another is a submerged-type weir, on the control of algal growth in Daechung Reservoir. A two-dimensional(2D) coupled hydrodynamic and eutrophication model that can accommodate vertical movement of the curtain weir following the water surface variations was verified using field data obtained in two distinctive hydrological years; dry(2008) and wet(2010). The model adequately simulated the temporal and spatial variations of water temperature, nutrients and algal(Chl-a) concentrations during the periods. The effectiveness of curtain weir on the control of algal bloom was evaluated by applying the model to 2001(dry year) and 2010 assuming 6 different scenarios according to installation locations. The curtain weirs that already installed at 3, 5, 7 sites(scenario C-2) showed significant effect on the control of algal growth in the reservoir; the reduction rates of algal concentration were placed in the range of 7.5~31.5% and 9.1~44.9% for 2001 and 2010, respectively. However the simulation results revealed that additional installation of curtain weirs(scenario C-3~C-6) in the bay area (choosori) have marginal effect. The effectiveness of submerged weir was evaluated against 2010 assuming 7 different scenarios according to installation locations, but all scenarios(S-1~S-7) showed neglectable or negative effect on the control of algal growth.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.202-206
• /
• 2001

In this study, the risk assessment of small reservoir by collapse using GIS is evaluated. Direct damage distance from collapsed reservoir is estimated by empirical USBR equations and submerged area is calculated by USBR's idea. The amount of damage by collapsed reservoir is figured out by damage assessment of National Institute for Disaster Prevention.

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.40-42
• /
• 2000

This paper presents a new method of segmenting a one-dimensional signal into a set of features of type(line, Vee-groove, Lap-joint and etc.), A set of requirements for the segmentation process result from the application area, which in this case are laser welding, GMAW(Gas Metal Arc Welding), SAW(Submerged Arc Welding) and high speed tack welding. The algorithm is able to detect an exact welding position in the presence of noise and missing data, yet is reasonably economical to implement