• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.48-52
• /
• 2017

In this study, we used I-V spectroscopy, photoconductivity (PC) yield and internal photoemission (IPE) yield using IPE spectroscopy to characterize the Schottky barrier heights (SBH) at insulator-semiconductor interfaces of Pt/$HfO_2$/p-type Si metal-insulator-semiconductor (MIS) capacitors. The leakage current characteristics of the MIS capacitor were analyzed according to the J-V and C-V curves. The leakage current behavior of the capacitors, which depends on the applied electric field, can be described using the Poole-Frenkel (P-F) emission, trap assisted tunneling (TAT), and direct tunneling (DT) models. The leakage current transport mechanism is controlled by the trap level energy depth of $HfO_2$. In order to further study the SBH and the electronic tunneling mechanism, the internal photoemission (IPE) yield was measured and analyzed. We obtained the SBH values of the Pt/$HfO_2$/p-type Si for use in Fowler plots in the square and cubic root IPE yield spectra curves. At the Pt/$HfO_2$/p-type Si interface, the SBH difference, which depends on the electrical potential, is related to (1) the work function (WF) difference and between the Pt and p-type Si and (2) the sub-gap defect state features (density and energy) in the given dielectric.

• The Korean Journal of Pharmacology
• /
• v.30 no.3
• /
• pp.321-330
• /
• 1994

The protective effect of 'ischemic preconditioning (PC)' on ischemia-reperfusion injury of heart has been reported in various animal species, but without known mechanisms in detail. In an attempt to investigate the cardioprotective mechanism of PC, we examined the effects of PC on the myocardial oxidative injuries and the oxygen free radical production in the ischemia-reperfusion model of isolated Langendorff preparations of rat hearts. PC was performed with three episodes of 5 min ischemia and 5 min reperfusion before the induction of prolonged ischemia (30 min)-reperfusion(20 min). PC prevented the depression of cardiac function (left ventricular pressure x heart rate) observed in the ischemic-reperfused heart, and reduced the release of lactate dehydrogenase during the reperfusion period. On electron microscopic pictures, myocardial ultrastructures were relatively well preserved in PC hearts as compared with non-PC ischemic-reperfused hearts. In PC hearts, lipid peroxidation of myocardial tissue as estimated from malondialdehyde production was markedly reduced. PC did not affect the activity of xanthine oxidase which is a major source of oxygen radicals in the ischemic rat hearts, but the myocardial content of hypoxanthine (a substrate for xanthine oxidase) was much lower in PC hearts. It is suggested from these results that PC brings about significant myocardial protection in ischemic-reperfused heart and this effect may be related to the suppression of oxygen free radical reactions.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.2
• /
• pp.45-56
• /
• 2015

In this paper we propose a very rapid moving object tracking method for an object-based auto focus on a smart phone camera. By considering the limit of non-learning approach on low-performance platforms, we use a sliding-window detection technique based on histogram features. By adapting the integral histogram, we solve the problem of the time-consuming histogram computation on each sub-window. For more speed up, we propose a local candidate search, and an adaptive scaling template method. In addition, we propose to apply a stabilization term in the matching function for a stable detection location. In experiments on our dataset, we demonstrated that we achieved a very rapid tracking performance demonstrating over 100 frames per second on a PC environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.113-120
• /
• 2006

This paper proposed the control algorithm fur aspheric surface grinding and was verified by the experiment. The functions of the algorithm were simultaneous control of the position and interpolation of the aspheric curve. The non-linear formula of the tool position was derived from the aspheric equations and the shape of the tool. The function was partitioned by an certain interval and the control parameters were calculated at each control section. The movement in a session was interpolated with acceleration and velocity. The position error was feed-backed by rotary encorder. The concept of feedback algorithm was correcting position error by increasing or decreasing the speed. In the experiment, two-axis machine was controlled to track the aspheric surface by the proposed algorithm. The effect of the control and process parameters was monitored. The result showed that the maximum tracking error was under sub-micro level for the concave and convex surfaces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.100-103
• /
• 2005

In this study, tool path control algorithm for aspherical surface grinding was derived and discussed. The aspherical surface actually means contact points between lens and tool. Tool positions are generally defined at the center of a tool, so there is difference between tool path and lens surface. The path was obtained from contact angle and relative position from the contact point. The angle could be calculated after differentiating an aspheric equation and complex algebraic operations. The assumption of the control algorithm was that x moves by constant velocity while z velocity varies. X was normal to the radial direction of lens, but z was tangential. The z velocities and accelerations were determined from current error and next position in each step. In the experiment, accuracy of the control algorithm was checked on a micro-precision machine. The result showed that the control error tended to be diminished when the tool diameter increased, and the error was under sub-micro level.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1149-1153
• /
• 2006

LPC analogues including natural and unnatural LPC, 3-L-2-PC, acetylated LPC and ethylene glycol derivative are prepared from D-mannitol using in convenient procedures by only changing the synthetic sequences, and their protective activities against cecal ligation and puncture (CLP)-induced severe sepsis are compared. The chirality at C2 position in LPC is found to be required as (S)-configuration for sepsis inhibition, comparing from the protection activity between LPC 6 and unnatural LPC 8. The hydroxyl functionality is also very important and required at C2 or C3 position as shown in the protection activities of ethylene glycol analogue 11 and 3-L-2-PC 9.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.262-268
• /
• 2013

We study the focusing properties of a two-dimensional square-lattice photonic crystal (PC) comprising silica and germanium partitioned cylinders in air background. The finite difference time domain (FDTD) method with periodic boundary condition is utilized to calculate the dispersion band diagram and the FDTD method incorporating the perfectly matched layer boundary condition is employed to simulate the image formation. In contrast to the common square PCs in which the negative refraction effect occurs in the first photonic band without negative phase propagation, in our suggested model system, the frequency with negative refraction exists in the second band and in near-infrared region. In this case, the wave propagates with a negative phase velocity and the evanescent waves can be supported. We also discuss the dependency of the image resolution and its location on surface termination, source location, and slab thickness. According to the simulation results, spatial resolution of the proposed PC lens is below the radiation wavelength.

• The KIPS Transactions:PartB
• /
• v.12B no.3 s.99
• /
• pp.329-336
• /
• 2005

This paper proposes a method to provide intelligence for characters in fighting action games by using genetic algorithm. The proposed characters without any knowledge on the rules of the game learn the rules and techniques for generations, and have the capability of evolving. To evaluate adaptability for varying circumstances, we changed the rules and compared the results. The experimental results show that the intelligent characters can adapt to the new rules. An advantage of the proposed method is that it can be easily applied to characters for other category of games such as PC games and internet online games.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.581-588
• /
• 2002

In implementing interactive multimedia systems, real-time visualization plays an important role. This paper presents efficient data structures and algorithms for real-time terrain navigation. Terrain data set is usually too huge to display as is. Therefore LOD (levels of detail) methods and view frustum culling are essential tools. This paper describes in detail compact hierarchical data structures, fast view frustum culling, and efficient LOD construction/rendering algorithms. Unlike previous works, we use a precise screen-space error metric for vertex removal and a strict error threshold allowing sub-pixel -sized errors only. Nevertheless, we can achieve 22 fps on average in a PC platform. The methods presented in this paper also satisfy almost all of the requirements for interactive real-time terrain Visualization.

• Journal of Information Technology Applications and Management
• /
• v.28 no.4
• /
• pp.59-78
• /
• 2021

Mobile Grocery Shopping (MGS) has become the New Normal as the COVID-19 pandemic has changed the way consumers shop. Drawing on the framework of Customer Journey Map (CJM), this study explores consumers' MGS by identifying specific stages of Customer Journey and comparing consumers' satisfaction between PC-based online and mobile shopping experiences at each stage throughout the journey. This study collected 562 responses from subjects who have mobile and PC-based grocery shopping experiences at the major domestic e-Commerce platforms. Independent t-test analysis showed that differences in satisfaction between mobile and online shopping experiences exist in 5 main stages and 16 sub-stages of CJM. The results of service and technological innovation mentioned in the actual industry report were seen as empirical results leading to continued use of MGS as well as customer satisfaction. The findings of this study contribute to the research stream on Customer Journey by adopting the structure of CJM and analyzing specific stages of the journey in the context of MGS. Managerial implications for mobile-based business practitioners are also discussed.