• 한국자기공명학회논문지
• /
• 제26권1호
• /
• pp.10-16
• /
• 2022

The phase transition temperatures of CsCoCl₃·2H₂O crystals are investigated via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Three endothermic peaks at temperatures of 370 K (=T_C1), 390 K (=T_C2), and 416 K (=T_C3) were observed for phase transitions from CsCoCl₃·2H₂O to CsCoCl₃·1.5H₂O, to CsCoCl₃·H₂O, and then to CsCoCl₃·0.5H₂O, respectively. In addition, the spin-lattice relaxation time T_1ρ in the rotating frame and T₁ in the laboratory frame as well as changes in chemical shifts for ¹H and ¹³³Cs near T_C1 were found to be temperature dependent. Our analyses results indicated that the changes of chemical shifts, T_1ρ, and T₁ are associated with structural phase transitions near temperature T_C1. The changes of chemical shifts, T_1ρ, and T₁ near T_C1 were associated with structural phase transitions, owing to the changes in the symmetry of the structure formed of H₂O and Cs⁺ ions. Consequently, the structural symmetry in CsCoCl₃·2H₂O crystals based on temperature is discussed by the environments of their H and Cs nuclei.

• 한국시뮬레이션학회논문지
• /
• 제24권3호
• /
• pp.69-75
• /
• 2015

본 연구에서는 복합굴절차의 강도 해석을 통한 구조적 안정성을 평가하고자 한다. 3D CAD 데이터, 사용 재질에 대한 물성값, 하중 조건 및 경계조건을 바탕으로, 범용 구조 해석 프로그램인 Nastran을 활용하여 복합굴절차에 대한 정적 구조 해석을 실시하였다. 하부 프레임(Sub frame, Out-trigger, Chassis frame)에 대한 구조해석을 수행하기 위해, 각 Out-trigger가 최대 하중을 받는 4가지 경우를 산정하였다. 이러한 해석된 결과를 통하여 국부적으로 강도가 부족한 위치를 특정지어, 보다 안전한 설계에 도움이 되도록 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.640-644
• /
• 2000

Sn-3.5Ag 무연합금을 Cu 및 Alloy42 리드프레임에 납땜접합(solder joint)하고 미세조직, 젖 음성, 전단강도, 시효효과를 측정하여 비교하였다. CU의 경우, 납땜의 Sn기지상안에 Ag$_3$Sn$_{5}$상이, 그리고 땜납/리드프레임의 경계면에는 1~2$\mu\textrm{m}$ 두께의 Cu$_{6}$Sn$_{5}$상이 형성되었다. Alloy42의 경우, 기지상내에는 낮은 밀도의 Ag$_3$Sn상만이, 그리고 계면에는 0.5~1.5$\mu\textrm{m}$ 두께의 FeSn$_2$이 형성되었다. 한편. Cu에 비해 Alloy42 리드프레임에서 전단강도는 낮았으며, 시효 시간에 따라 전단강도는 모두 감소하였다. 18$0^{\circ}C$에서 1주일간 시효처리 후, Cu 리드프레임에는 계면에 η-Cu$_{6}$Sn$_{5}$ 층이 15-20$\mu\textrm{m}$ 성장하였고, A11oy42 리드프레임에는 기지상내에 AgSn$_3$이 조대하게 성장하였으며, 계면에는 FeSn$_2$층만이 약 $1.5\mu\textrm{m}$로 성장하였다.성장하였다.

• 박물관보존과학
• /
• 제4권
• /
• pp.1-16
• /
• 2003

용산 새 박물관에 전시될 중앙아시아 벽화의 보존처리를 위해 이들 벽화의 채색 안료 성분 분석과 벽체에 포함된 지푸라기의 식물종 식별을 위한 조사를 실시하였다. 또한 1916년 우리 박물관에 반입되기 이전에 일본에서 시행된 보존처리 재료 및 방법을 검토하기 위하여 나무 보호틀의 목재수종 및 종이의 재질을 분석하였다. 조사결과 본4075, 4078의 검은색 안료는 carbon(C), 바탕의 흰색은 gypsum[Ca(SO)₄(H₂O)₂], 적색 계통은 lead oxide(Pb₃O₄, PbO)와 hematite(Fe₂O₃), 녹색은 Cu, As, O 화합물 등을 채색 안료로 사용하였다. 또한 벽체를 조성할 때 흙벽이 갈라지는 것을 방지하기 위해 섞어 넣은 지푸라기는 밀짚 또는 귀리짚 종류인 것으로 조사되었다. 또한 현재 벽화를 둘러싸고 있는 나무 보호틀은 버드나무속, 사시나무속, 삼나무, 그리고 소나무 중 적송류로 만들어진 것으로 밝혀졌으며 벽화(본4054, 4097)의 보호틀 내부에서 발견된 종이는 뽕나무 껍질로 만든 것으로 조사되었다.

• Earthquakes and Structures
• /
• 제26권3호
• /
• pp.175-189
• /
• 2024

Aiming at studying the plastic hinge (PH) evolution regularities and failure mode of rocking wall moment frame (RWMF) structure in earthquakes, the whole-working history analysis of seismic performance state of RWMF structure based on co-operation performance and PH evolution was carried out. Building upon the theoretical analysis of the elastic internal forces and deformations of RWMF structures, nonlinear finite element analysis (FEA) methods were employed to perform both Pushover analysis and seismic response time history analysis under different seismic coefficients (δ). The relationships among PH occurrence ratios (R_ph), inter-story drifts and δ were established. Based on the plotted curve of the seismic performance states, evaluation limits for the R_ph and inter-story drifts were provided for different performance states of RWMF structures. The results indicate that the R_ph of RWMF structures exhibits a nonlinear evolution trend of "fast at first, then slow" with the increasing of δ. The general pattern is characterized by the initial development of beam hinges in the middle stories, followed by the development towards the top and bottom stories until the beam hinges are fully formed. Subsequently, the development of column hinges shifts from the bottom and top stories towards the middle stories of the structure, ultimately leading to the loss of seismic lateral capacity with a failure mode of partial beam yield, demonstrating a global yielding pattern. Moreover, the limits for the R_ph and inter-story drifts effectively evaluate the five different performance states of RWMF structures.

• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.663-679
• /
• 2021

To elucidate the differences in the collapse behavior between a single-story beam-column assembly and multi-story frame, two 1/3-scale two-bay composite frames, including a single-story composite beam-column assembly and a three-story composite sub-frame, were designed and quasi-statically tested. The load-displacement responses, failure modes, and internal force development of the two frames were analyzed and compared in detail. Furthermore, the resistance mechanisms of the two specimens were explored, and the respective contributions of different load-resisting mechanisms to the total resistances were quantitatively separated to gain deeper insights. The experimental tests indicated that Vierendeel action was present in the two-dimensional multi-story frames, which led to an uneven internal force distribution among the three stories. The collapse resistance of TSDWA-3S in the flexural stage was not significantly increased by the structural redundancy provided by the additional story, as compared to that of TSDWA-1S. Although the development of the load response was similar in the two specimens at flexural stage, the collapse mechanisms of the multi-story composite frame were much more complicated than those of the single-story beam-column assembly, and the combined action between stories was critical in determining the internal force redistribution and rebalancing of the remaining structure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1235-1236
• /
• 2011

• 한국자기공명학회논문지
• /
• 제18권1호
• /
• pp.41-46
• /
• 2014

In order to obtain information on the structural geometry of $NH_4HSeO_4$ near the phase transition temperature, the spectrum and spin-lattice relaxation time in the rotating frame $T_{1{\rho}}$ for the ammonium and hydrogen-bond protons were investigated through $^1H$ MAS NMR. $T_{1{\rho}}$ for the hydrogen-bond protons abruptly decreased at high temperature and it is associated with the change in the structural geometry in $O-H{\cdots}O$ bonds. This mobility of the hydrogen-bond protons may be the main reason for the high conductivity.

• 한국재료학회지
• /
• 제34권3호
• /
• pp.170-174
• /
• 2024

In this study, we report the microstructural evolution and shear strength of an Sn-Sb alloy, used for die attach process as a solder layer of backside metal (BSM). The Sb content in the binary system was less than 1 at%. A chip with the Sn-Sb BSM was attached to a Ag plated Cu lead frame. The microstructure evolution was investigated after die bonding at 330 ℃, die bonding and isothermal heat treatment at 330 ℃ for 5 min and wire bonding at 260 ℃, respectively. At the interface between the chip and lead frame, Ni₃Sn₄ and Ag₃Sn intermetallic compounds (IMCs) layers and pure Sn regions were confirmed after die bonding. When the isothermal heat treatment is conducted, pure Sn regions disappear at the interface because the Sn is consumed to form Ni₃Sn₄ and Ag₃Sn IMCs. After the wire bonding process, the interface is composed of Ni₃Sn₄, Ag₃Sn and (Ag,Cu)₃Sn IMCs. The Sn-Sb BSM had a high maximum shear strength of 78.2 MPa, which is higher than the required specification of 6.2 MPa. In addition, it showed good wetting flow.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권11호
• /
• pp.536-540
• /
• 2002

This paper proposes a method to drive an AC plasma display panel(PDP) with a significantly improved contrast ratio. In the proposed method, during the first sub-field of one frame, all PDP cells are reset by the ramp waveform, and during the other sub-field, only the cells turned on in the previous sub-field are reset. No light is emitted during the reset period of every sub-field except the first sub-field. For a 10-bit picture, the luminance of the dark level for the proposed method is 10 times lower than that for the conventional method, in which the ramp waveform for the reset is used in every sub-field. Accordingly, the contrast ratio for the proposed method is 10 times higher than that for the conventional method. For the 10-bit picture, the measured contrast ratio was about 3080:1 for the proposed method and about 285:1 with the conventional method, a result the contrast ratio has been increased in 10.8 times. This result shows that the proposed method can realize an image with high contrast ratio.