• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.115-128
• /
• 2019

Small and Medium-sized Enterprises (SMEs) are being faced with rapid changes in their business environments due to evolution of technologies and innovation in societal eco-systems. Particularly, dynamic interactions between such environments and enterprise activities have become significant, so technology planning, which is a process of identifying appropriate directions regarding product and technology development, has received much attention to cope with such dynamics proactively. However, SMEs typically have limits in performing independent, strategical and systematical technology planning activities due to the lack of human, material and financial resources. This paper proposes the development of a product roadmapping method so that SMEs carry out efficient technology planning activities with interconnections of external business environments. The present work provides product roadmap templates that directly accommodate the influence of business environments on the product's system and its associated super/sub-systems with the use of external environment analysis techniques including TRIZ methodology, PEST and 5Forces analysis. These templates are useful to efficiently forecast the directions of product's development and evolution, which arise from changes in external environments. Consequently, the present work enables SMEs to flexibly cope with the era of the next R&D generation, which pursues value creation through mutual interconnection between business environments and technology development.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.845-853
• /
• 2023

The Ministry of Employment and Labor announced a roadmap for reducing serious accidents to create a "safe and healthy workplace, happy Korea" and ordered a risk assessment for all work processes in all workplaces on November 30, 2022. Accordingly, even workplaces that handle new chemicals must conduct risk assessment when introducing new chemicals, but the risk assessment techniques currently proposed by the government focus on preventing conventional accidents such as falls, getting caught, and bumping. Currently, there is a Chemical Hazard Risk Management (CHARM) technique that is most commonly used for chemical risk assessment, but in small and medium-sized businesses that lack professional manpower related to chemical substances, there are many technical terms in the technique and it is difficult to interpret, so its utilization is very low. Therefore, the purpose of this study is to present a method that can make risk assessment easier and simpler before handling new chemicals so that it can be used well in small and medium-sized businesses that lack professional manpower related to chemical substances. Through actual cases, the method of using CHARM was confirmed step by step, and based on this, risk reduction establishment and execution methods were derived. Based on the results of this study, it is expected that it will be used as the best tool for preventing accidents such as acute poisoning when handling chemicals in small and medium-sized workplaces that lack professional manpower related to chemical substances and make every effort to protect workers' health.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.457-463
• /
• 2015

A gas turbine engine plays an important role as a prime mover that is used in the marine transportation field as well as the space/aviation and power plant fields. However, it has a complicated structure and there is a time delay element in the combustion process. Therefore, an elaborate mathematical model needs to be developed to control a gas turbine engine. In this study, a modeling technique for a gas generator, a PLA actuator, and a metering valve, which are major components of a gas turbine engine, is explained. In addition, sub-models are obtained at several operating points in a steady state based on the trial running data of a gas turbine engine, and a method for controlling the engine speed is proposed by designing an NPID controller for each sub-model. The proposed NPID controller uses three kinds of gains that are implemented with a nonlinear function. The parameters of the NPID controller are tuned using real-coded genetic algorithms in terms of minimizing the objective function. The validity of the proposed method is examined by applying to a gas turbine engine and by conducting a simulation.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.148-157
• /
• 2012

Korea, with 63.7% of the land being forests, has unique characteristics of forest landscapes coming into view for most residential areas and roads. This study was undertaken with a purpose of supporting forest landscape management by partitioning the areas that landscape management is needed. Through analysing the degree of forest landscape management needs and the visual absorption capability for landscape changes, the zoning process and method for landscape management were conducted. In order to select the areas that are managed by priority for landscape, the degree of forest landscape management needs was quantitatively analyzed with the main scenic sites, travel frequencies, major forest landscape resources, and areas with demand for walking and automobile travel as the basis. The visual absorption capability that means the visual acceptance capability against physical landscape changes of the designated areas was analyzed in order to select the areas that are suitable for artificial landscape management. As a result, it became possible to express the degrees of forest landscape management needs in high, middle, and low sub-areas, and the visual absorption capability in high, middle, and low sub-areas, for each of the three zones in terms of spaces in the forest landscape management areas. For example, among the forest landscape transition zones, if the degree of forest landscape management needs is high and the visual absorption capability is high, then aggressive landscape management would be possible; this would also mean that this area could accept certain levels of physical landscape changes. By applying zoning methods like these, it was possible to attain a conclusive result that proper means of landscape design and management of the forest landscape resources and the surrounding areas could be provided.

• Journal of Navigation and Port Research
• /
• v.45 no.4
• /
• pp.212-223
• /
• 2021

The objective of this study was to evaluate structural safety according to environmental conditions acting on the piping of offshore structure and the motion of the structure. As for conditions acting on the piping, the maximum and minimum temperature conditions were used to analyze the design conditions of N2 generator. The motion of the structure was calculated and applied according to the DNV(Det Norske Veritas) rule. Each condition was combined and a total of 26 load combinations were constructed according to thermal load, motion load, and presence or absence of pipe support. Analysis was performed using a commercial program MSC Patran/Nastran. Thermal analysis was performed by applying the steady-state method, Sol 153. Thermal-structural coupled analysis was performed using Sol 101, a linear-static method. As a result of the analysis, the stress tended to increase when temperature inside the pipe was lower in Set 1 and Set 2, when temperature was higher in Set 3, and when the temperature difference between the inside and outside of the pipe in Set 4 was increased. However, the sum of stresses in the condition with only temperature load and the condition with only the kinetic load did not show the same value as the stress in the composite load condition of two loads. That is, the influence of the motion load varied depending on the direction of motion, the arrangement of pipes, and the position of the support. Therefore, it is necessary to comprehensively consider the size and direction of the motion load acting on the piping, the arrangement of the piping, and the location of the pipe supports during the design of piping.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.2
• /
• pp.119-127
• /
• 2021

The objective of this study was to evaluate effects of feeding methods on in vitro ruminal fermentation, total gas and methane production in Hanwoo steers. Six Hanwoo steers fitted with rumen cannula (430 ± 21 kg of body weight) were randomly assigned to one of three feeding systems: 1) feeding forage 1 hour after concentrate, 2) feeding concentrate 1 hour after forage, 3) feeding mixed ration. Rumen fluid sampled from each animals was incubated 24 hours with maize or timothy substrates in in vitro. Ruminal pH was increased in feeding method 2 or maize substrate than that of other methods or timothy substrate (P < 0.001). The production of total volatile fatty acid, acetate, propionate, butyrate, and valerate were increased when steers fed diets using feeding method 1 or rumen fluid was incubated with maize substrate (P < 0.001). Increased production of total gas and methane was observed in feeding method 1 and maize substrate compared to those of other methods or timothy substrate (P < 0.001). Due to the inconsistent results between ruminal fermentation and gas production in this study, further research is required to estimate effects of feeding method on enteric fermentation and gas production in in vivo.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.535-546
• /
• 2010

Recently, the probability of collision accident between vehicles or vessels and infrastructures are increasing at alarming rate. Particularly, collision impact load can be detrimental to sub-structures such as piers and columns. The damaged pier from an impact load of a vehicle or a vessel can lead to member damages, which make the member more vulnerable to impact load due to other accidents which. In extreme case, may cause structural collapse. Therefore, in this study, the vehicle impact load on concrete compression member was considered to assess the quantitative design resistance capacity to improve, the existing design method and to setup the new damage assessment method. The case study was carried out using the LS-DYNA, an explicit finite element analysis program. The parameters for the case study were cross-section variation of pier, impact load angle, permanent axial load and axial load ratio, concrete strength, longitudinal and lateral rebar ratios, and slenderness ratio. Using the analysis results, the performance based resistance capacity evaluation method for impact load using satisfaction curve was developed using Bayesian probabilistic method, which can be applied to reinforced concrete column design for impact loads.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.275-280
• /
• 2005

We propose a new approach to greatly simplify the fabrication of conventional nanoimprint lithography (NIL) by combined nanoimprint and photolithography (CNP). We introduce a hybrid mask mold (HMM) made from UV transparent material with a UV-blocking Cr metal layer placed on top of the mold protrusions. We used a negative tone photo resist (PR) with higher selectivity to substrate the CNP process instead of the UV curable monomer and thermal plastic polymer that has been commonly used in NIL. Self-assembled monolayer (SAM) on HMM plays a reliable role for pattern transfer when the HMM is separated from the transfer layer. Hydrophilic $SiO_2$ thin film was deposited on all parts of the HMM, which improved the formation of SAM. This $SiO_2$ film made a sub-10nm formation without any pattern damage. In the CNP technique with HMM, the 'residual layer' of the PR was chemically removed by the conventional developing process. Thus, it was possible to simplify the process by eliminating the dry etching process, which was essential in the conventional NIL method.

• Research in Plant Disease
• /
• v.22 no.3
• /
• pp.178-183
• /
• 2016

Soybean yellow mottle mosaic virus (SYMMV) is a new emerging plant virus detected in soybean (Glycine max) in Korea. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay for rapid detection of SYMMV has been developed. In this study, we have designed primers (SYMM-F3/B3/FIP/BIP) specific to sequences from the coat protein gene of SYMMV genome. Sensitivity analysis showed that RT-LAMP was 10 to 100 times more sensitive than reverse transcription polymerase chain reaction (RT-PCR). The optimal reaction condition of RT-LAMP was determined at $65^{\circ}C$ for 50 minutes. The result indicates that RT-LAMP assay does not require special equipment and long time for SYMMV detection. Therefore, it can be an alternative detection method of RT-PCR in laboratory.

• YAKHAK HOEJI
• /
• v.57 no.4
• /
• pp.258-264
• /
• 2013

Herbal medicine has been traditionally used in Asian countries for a long time. Many pharmacological effects are identified in the herbs and these herbs are believed to be safe for human. However, the safety or adverse effect of some traditional herbal medicines has not been established. We have chosen Cyperi rhizoma based on the Korea Herbal Pharmacopoeia and which have been widely used for an anti-inflammatory effect in Korea. The object of the study was to evaluate safety of Cyperi rhizoma in rats. The aqueous extract of Cyperi rhizoma was prepared according to the standard hot water extraction method of the Korea Pharmacopoeia. In the sub-chronic study, the aqueous extract of Cyperi rhizoma was orally administered once daily as 0, 125, 250, 500, 1000 and 2000 mg/kg/day to male and female F344 rats for 13 weeks. There were no treatment related abnormalities in mortality, clinical signs, food consumption, ophthalmologic examination, hematology, serum chemistry, urinalysis, gross observation, organ weight and histopathologic examination. In conclusion, The NOAEL (No Observed Adverse Effect Level) for Cyperi rhizoma aqueous extract was determined as more than 2000 mg/kg/day in the present experimental condition.