• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.445-453
• /
• 2021

Computational thermodynamics for various alloy systems is well known as the CALPHAD technique. Gibbs energy model parameters for each phase are obtained from experimentally measured thermodynamic properties and are mainly used to predict areas not experimentally measured and to analyze experimental results thermodynamically. In this study, the thermodynamic modeling of the Ni-Cr-Nb-C quaternary system is conducted for a thermodynamic analysis of the phenomena by which heat-resistant cast alloys (IN-657) are destroyed in certain areas after long-term use. The stable phases in the system according to the Cr content, phase fraction depending on the temperature, and long-range ordering parameters for the Ni₂Cr phase are calculated and compared to results obtained experimentally. The calculated thermodynamic properties suitably explain the experimentally reported fracture temperature range and the results of stable phases formed in the fractured areas. Thermodynamic modeling through the CALPHD method is expected to be useful for analyzing and predicting the thermodynamic behaviors of various cast alloys.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.4
• /
• pp.5-12
• /
• 2001

This paper presents the simulation methodology of the interior noise of vehicle using the frequency response function based hybrid modeling of the system which consists of multi-subsystem models obtained by the test or analysis. The complex systems such as a trimmed body of high modal density and a powertrain were modeled by using experimental data, and a sub-frame of a vehicle of low modal density was modeled by finite element data. Modeling of the whole system was executed and validated in the two stages. The first stave is combining the trimmed body and the sub-frame, and the second stage is attaching the powertrain, which is a exciting source, to the combined model of the first stage. The input force to the system was modeled as an equivalent force in the virtual space, which was obtained from impedance method using the FRFs of the powertrain and the responses. The interior noise predicted by the proposed method was very close to the direct measurement, which showed feasibility of the proposed modeling procedure. Since the methodology is easily applied to both the transfer path analysis of structure-borne noise and the analysis of noise contribution of a sub-system, it is expected to be a strong tool for design change of a vehicle in the earlier stare.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2005.09a
• /
• pp.197-201
• /
• 2005

When we want to find out the regulatory relationships between genes from gene expression data, dimensionality is one of the big problem. In general, the size of search space in modeling the regulatory relationships grows in O(n$^2$) while the number of genes is increasing. However, hopefully it can be reduced to O(kn) with selected k by applying divide and conquer heuristics which depend on some assumptions about genetic network. In this paper, we approach the modeling problem in divide-and-conquer manner. We applied clustering to make the problem into small sub-problems, then hierarchical model process is applied to those small sub-problems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.3
• /
• pp.256-262
• /
• 2007

In mass customization, the focus is variety and customization through flexibility and quick responsiveness. Mass customizers seek to provide personalized, custom-designed products at low prices to give customers exactly what they want and to provide sufficient variety in products and services. The idea of the product family is the most adequate approach to realize mass customization. An understanding of customer needs using functional decomposition becomes necessary to enhance the performance of the product family. This paper focuses on functional architecture modeling based on customer need regarding sub-functions for the product family. A quantitative functional model captures product functionality and customer need. Based on customer need ratings and sub-function, a product-function matrix was created. Additionally, a product-product matrix was generated to provide a similarity index among product families. A case study for implementing the functional architecture modeling was performed on the single use cameras.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.128-135
• /
• 2009

In this paper, we proposed an interactive GUI (Graphical User Interface) system to model buildings with an editable script. Our system also provides probabilistic finite-state machine (PFSM) to define the relationships of sub-models with transformation matrices and transition probabilities for constructing new novel building models automatically. User can not only get various building models by PFSM but also adjust the probabilities of sub-models from PFSM to get desired building models. As shown in the results, the various and vivid building models can be constructed easily and quickly for non-expert users. Besides, user can also edit the script file which is provided by our system to modify the properties directly.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.1
• /
• pp.20-27
• /
• 2013

Numerical modeling of $CO_2$ water heater was conducted prior to optimal design of medium and large sized $CO_2$ water heater, and the experimental test with small sized $CO_2$ water heater having heat capacity of 4 kW was completed to verify the present numerical model. The present model estimated the experimental data of COP(coefficient of performance), heating capacity, and the hot water outlet temperature within the range of 3% to 8% of mean deviation. As increase of EEV(electric expansion valve) opening area, decreasing of heating capacity and the hot water outlet temperature, and increasing of COP were found in both experimental and numerical investigation.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.369-378
• /
• 2018

This study started with the need for transition to competency-based education as well as the witness of fast changes in fashion industry's job environment. The goals of this study were (1) to explore fashion designers' competencies that are necessary for a successful careers in global fashion industry, and (2) to establish fashion designer competency model. In-depth individual interviews were conducted with 15 participants who have charged for design department and moreover have shown high performance in national, licence or designer brands in Korea fashion industry. Grounded theory was adopted to analyze data. As a result of analysis, the 4 core competencies emerged: problem-solving, research, inter-personal, and self-development. Each core competency has sub-competencies. Creativity, commerciality, control, decision making were sub-competencies for the problem-solving competency. Information management, innovation understanding & application, trend analysis & forecasting were sub-competencies for the research competency. Consumer, inside company, and outside company relationships were sub-competencies for the inter-personal competency. Self-awareness, self-management, expertise were sub-competencies for the self-development competency. In order to acquire these competencies, knowledge (academic, practical, multi-discipline), skills (sense, analysis, synthesis, communication), and attitude (interest, enjoyment, perseverance, personality) were essential. Based on these findings, implications for university fashion design education and further research areas were suggested.

• Communications for Statistical Applications and Methods
• /
• v.30 no.3
• /
• pp.259-272
• /
• 2023

In this paper, we suggest a new method for the prediction of sharp changes in particulate matter (PM₁₀) using quantile mapping. To predict the current PM₁₀ density in Seoul, we consider PM₁₀ and precipitation in Baengnyeong and Ganghwa monitoring stations observed a few hours before. For the PM₁₀ distribution estimation, we use the extreme value mixture model, which is a combination of conventional probability distributions and the generalized Pareto distribution. Furthermore, we also consider a quantile generalized additive model (QGAM) for the relationship modeling between precipitation and PM₁₀. To prove the validity of our proposed model, we conducted a simulation study and showed that the proposed method gives lower mean absolute differences. Real data analysis shows that the proposed method could give a more accurate prediction when there are sharp changes in PM₁₀ in Seoul.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2004.05a
• /
• pp.109-117
• /
• 2004

In this paper, we consider the aortic sinus baroreceptor, which is the most representative baroreceptor sensing the variance of pressure in the cardiovascular system, and propose heart activity control model to observe the effect of delay time in heart period and stroke volume under the regulation of baroreflex in the aortic sinus. The proposed heart activity baroreflex regulation model contains electric circuit sub-model. We constituted the time delay sub-model to observe sensitivity of heart activity baroreflex regulation model by using the variable value to represent the control signal transmission time from the output of baroreflex regulation model to efferent nerve through central nervous system. The simulation object of this model is to observe variability of the cardiovascular system by variable value in time delay sub-model. As simulation results, we observe three patterns of the cardiovascular system variability by the time delay, First, if the time delay over 2.5 second, aortic pressure and stroke volume and heart rate is observed nonperiodically and observed. Finally, if time delay under 0.1 second, then heart rate and aortic pressure-heart rate trajectory is maintained in stable state.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.438-440
• /
• 2003

This study is introducing a new approach of ATInSAR hologram for modeling wave refraction spectra pattern. TOPSAR data with L$_{-HH}$ and C-vv bands utilized spatial variation of wave refraction. Based on the phase information in along track interferometry, and ATInSAR hologram the quantitative information such swell wave height and spectra energy have been modeled. The phase information in ATInSAR hologram images can be transferred to wave refraction The ATInSAR hologram can be used to investigate the wave refraction pattern along the coastal waters. The fringe information pattern was shown to be useful in modeling wave refaction spectra varaition. The hologram interferometry wave refraction model consists of two sub-models. The purpose of first sub-model is to determine the swell wave height by using ATInSAR. Second sub-model aims to generate the holographic interferometry from the information of two wave spectra which detected by ATInSAR technique. The azimuth cut-off variations along the fringe patterns will be estimated. As azimuth cut-off contains the wave height information which could be used the significant wave height variation in convergence and divergence zone.