• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1777-1783
• /
• 2020

As a part of R&D work for the high intensity proton linac of China Accelerator Driven Sub-critical System project, a superconducting half-wave cavity with a frequency of 162.5 MHz and an optimal beta of 0.15 (HWR015) has been developed at Institute of Modern Physics (IMP), Chinese Academy of Sciences. In this paper, the design and test results will be described in detail. We introduced a new stiffening strategy for the HWR cavity, the simulation results show that the cavity has much lower frequency sensitivity coefficient (df/dp), Lorentz force detuning coefficient (KL), and can achieve more stable mechanical properties. The performance of the HWR cavity operated in cryostat will be also reported.

• 대한기계학회논문집B
• /
• 제39권6호
• /
• pp.477-483
• /
• 2015

공동유동에 관한 연구는 공동시스템에서 발생하는 소음/진동 문제로 인하여 많은 연구가 이루어졌으며, 현제 항공우주 산업의 급속한 발전과 더불어 다양한 공학적 장치에 적용되고 있다. 하지만, 실제 공학적 응용에서 많이 적용되는 곡면 벽상에 설치한 공동유동에 관한 연구에 대해서는 거의 수행되지 않았다. 본 연구에서는 곡면벽상에 설치한 공동유동의 특성을 조사하기 위해 수치계산을 수행하였으며, 곡면의 곡률 반경의 비(L/R) 및 입구 유동의 마하수를 변화시켜, 천음속/초음속 공동유동에서 발생하는 압력진동을 조사하였다. 그 결과 곡면에 부착된 공동유동의 경우 와류의 상호작용으로 인한 압력 교란을 완화시켰으나, 압력 진동의 진폭을 증가시켰으며, 또한 마하수가 증가함에 따라 압력 진동의 진폭이 증가하였다. 주파수 분석 결과, 곡관의 무차원 진동수는 직관에 비해 낮은 값이 측정되었으며, 또한 Rossiter의 실험값에 비해 낮은 값을 가졌다.

• Advances in nano research
• /
• 제12권1호
• /
• pp.25-35
• /
• 2022

Within the framework of the density functional theory combined with the method of non-equilibrium Green's functions (DFT + NEGF), the features of electron transport in fullerene nanojunctions, which are «core-shell» nanoobjects made of a combination of fullerenes of different diameters C₂₀, C₈₀, C₁₈₀, placed between gold electrodes (in a nanogap), are studied. Their transmission spectra, the density of state, current-voltage characteristics and differential conductivity are determined. It was shown that in the energy range of -0.45-0.45 eV in the transmission spectrum of the "Au-C₁₈₀-Au" nanojunction appears a HOMO-LUMO gap with a width of 0.9 eV; when small-sized fullerenes C₂₀, C₈₀ are intercalation into the cavity C₁₈₀ the gap disappears, and a series of resonant structures are observed on their spectra. It has been established that distinct Coulomb steps appear on the current-voltage characteristics of the "Au-C₁₈₀-Au" nanojunction, but on the current-voltage characteristics "Au-C₈₀@C₁₈₀-Au", "Au-(C₂₀@C₈₀)@C₁₈₀-Au" these step structures are blurred due to a decrease in Coulomb energy. An increase in the number of Coulomb features on the dI/dV spectra of core-shell fullerene nanojunctions was revealed in comparison with nanojunctions based on fullerene C₆₀, which makes it possible to create high-speed single-electron devices on their basis. Models of single-electron transistors (SET) based on fullerene nanojunctions "Au-C₁₈₀-Au", "Au-C₈₀@C₁₈₀-Au" and "Au-(C₂₀@C₈₀)@C₁₈₀-Au" are considered. Their charge stability diagrams are analyzed and it is shown that SET based on C₈₀@C₁₈₀-, (C₂₀@C₈₀)@C₁₈₀- nanojunctions is output from the Coulomb blockade mode with the lowest drain-to-source voltage.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.431-437
• /
• 2022

As one of the most hazardous and deadliest pathogens, Listeria monocytogenes (LM) posed various serious diseases to the human being, thus designing effective strategy for its detection is of great significance. In this work, by preparing Ti₃C₂T_x MXenes nanoribbon (Ti₃C₂T_xR) as carrier and selecting thionine (Th) acted simultaneously as signal probe and functional monomer, a LM pathogen-imprinted polymers (PIP) integrated probe electrochemical sensor was design to monitor LM for the first time, that was carried out through the electropolymerization of Th on the Ti₃C₂T_xR/GCE surface in the existence of LM. Upon eluting the templates from the LM imprinted cavities, the fabricated PIP/Ti₃C₂T_xR/GCE sensor can rebound LM cells effectively. By recording the peak current of Th as the response signal, it can be weakened when LM cell was re-bound to the LM imprinted cavity on PIP/Ti₃C₂T_xR/GCE, and the absolute values of peak current change increase with the increasement of LM concentrations. After optimizing three key parameters, a considerable low analytical limit (2 CFU mL^-1) and wide linearity (10-10⁸ CFU mL^-1) for LM were achieved. In addition, the experiments demonstrated that the PIP/Ti₃C₂T_xR sensor offers satisfactory selectivity, reproducibility and stability.

• 소성∙가공
• /
• 제13권3호
• /
• pp.230-235
• /
• 2004

A new design based on the appropriate geometry of molded part and type of runner system under the optimal processing conditions was proposed to minimize the micro weld lines on the sub deco surface molded by two shot molding. Theoretical and experimental studies were conducted to examine the cause of the weld lines during the overmolding process in two shot molding. Various dimensions and geometries of substrate$(1^{st}shot)$ and the wall thickness of overmold$(2^{nd}shot)$ have been proposed to avoid the weld lines which are the most inevitable appearance defects occurred on the sub deco. The each design proposal was analyzed by mold flow analysis after part modeling. The analysis results were compared with molded part from mass production tool. It could be seen that from the analysis that the proper geometry of plastic part and type of runner system considering pressure drop under the optimal processing conditions were the most influential factors to avoid weld lines occured on the sub deco.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.213-221
• /
• 1998

The investigation regarding the ignition system of a plasma jet explored by using a constant volume vessel. The purpose of this study is to elucidate relation between the characteristics of the configuration and jet ejection of plasma jet plug, when the sub energy were supplied at plasma jet ignition system. From the results of a visualization by the schlieren system, the jut ejection for plasma jet ignition are depended on the jet plug configuration and sub energy, but the configuration of plasma jet plug is more influenced than the sub energy on the plasma jet ejection. And the plasma jet ignition strongly influences upon the combustion enhancement than the conventional spark ignition.

• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.1-5
• /
• 2004

Using the external cavity spectroscopy method, we have observed the saturated absorption spectrum of the P(16) line of the v$_1$+v$_3$ band of $^{13}C$_2$H$_2$$. The frequency of a laser has been stabilized to the saturated absorption spectrum. The relative contrast of the saturation spectrum is about 7% with respect to the linear absorption and the linewidth is about 1.8 MHz. The frequency fluctuation of the stabilized LD is about $\pm$ 20 KHz for a sampling time of 100 ms.

• Wind and Structures
• /
• 제11권5호
• /
• pp.377-389
• /
• 2008

An experimental investigation has been conducted to determine the effectiveness of base shield plates in reducing the drag of a rough circular cylinder in a cross flow at Reynolds numbers in the range $3{\times}10^4{\leq}Re{\leq}10.5{\times}10^4$. Three model configurations were investigated and compared: a plane cylinder (PC), a cylinder with a splitter plate (MC1) and a cylinder fitted with base shield plates (MC2). Each configuration was studied in the sub and supercritical flow regimes. The chord of the plates, L, ranged from 0.22 to 1.50D and the cavity width, G, between the plates was in the range from 0 to 0.93D. It is recognized that base shield plates can be employed more effectively than splitter plates to reduce the aerodynamic drag of circular cylinders in both the sub- and supercritical flow regimes. For subcritical flow regime, one can get 53% and 24% drag reductions for the MC2 and MC1 models with L/D=1.0, respectively, compared with the PC model. For supercritical flow regime however, the corresponding drag reductions are 38% and 7%.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.78-84
• /
• 2005

환형 노즐을 갖는 불화중수소 화학레이저 시스템에서 레이저빔 발진은 불소 원자와 중수소 분자의 혼합을 통해서 얻어진다. 초음속 연소기에서 연료의 분사각이 성능에 큰 영향을 미친다는 연구에 근거하여, 혼합률을 증진시키기 위한 연구로서 주유동과 일정각을 가지고 분사되는 중수소의 불소 원자와의 혼합률 증진에 대한 수치적 연구를 수행하였다. 중요 결과로서 중수소 분사각(10, 20, 40도)이 커짐에 따라서 최대 소신호 광학이득계수와 레이저 공동내의 압력이 상승하게 된다. 또한, 광학이득계수와 공동압력의 관점에서 불화중수소 화학레이저 발진을 위한 최대 성능은 20~40도 사이의 중수소 분사각에서 나타난다.

• 한국광학회지
• /
• 제13권5호
• /
• pp.396-399
• /
• 2002

전자선 증착기를 이용하여 1.3$\mu\textrm{m}$ 광모드 변환기가 집적된 반도체 레이저 출력 단면에 $SiO_2$와 $TiO_2$ 두 개의 박막 층으로 무반사 증착 하였다. 증착 단면의 최소 단면 반사율 $~ 10^{-5}$을 얻었고, $~ 10^{-4}$이하 단면 반사율 밴드 폭은 약 27nm임을 측정하였다. 이러한 코팅은 외부 공진기 레이저 광원 및 반도체 광 증폭기 등에 응용 가능하다.