• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.75-85
• /
• 2009

This work proposes a 13b 100MS/s 0.13um CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5dB and a maximum SFDR of 78.0dB at 100MS/s, respectively. The ABC with an active die area of $1.22mm^2$ consumes 42.0mW at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.

• Korean Journal of Food Science and Technology
• /
• v.49 no.3
• /
• pp.304-310
• /
• 2017

The aim of this study was to compare the physicochemical properties of domestic and imported commercial plain wheat flour and dough. Four types of domestic wheat flour (DW; DW1-4) were compared to four types of imported wheat flour (IW; IW1-4). DWs exhibited lower moisture content, lightness (L), and whiteness, and higher protein content, redness (a), and yellowness (b), than those exhibited by IWs. Solvent retention capacity of DWs and IWs was similar; however, DWs showed higher gluten performance index. Pasting properties, analyzed by rapid visco analyzer (RVA), were similar for DW1, DW2, and IWs; however, DW3 and DW4 showed different RVA patterns. Considering that DW3 and DW4 were organic wheat flour, possible incorporation of damaged kernel might increase amylase activities resulting in decreased peak viscosity. Dough resistance (108.4-159.9 g) and extensibility (11.8-16.7 mm) of IWs were higher than those of DWs (78.0-118.7 g, 8.7-12.5 mm, respectively).

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.177-184
• /
• 2013

The objective of this study was to analyze the accuracy of estrus detection of heat detector and analysis of estrus behavior (mounting and mounted), and the evaluation of conditions required for improving reproductive efficiency in Holstein dairy cows fitted with a estrous detector. The heat detection system consists of estrous detector based on wireless sensor and an electric bulletin board displayed estrus behavior data. When cow mounting other cows, the accuracy of estrus behavior displayed an electric bulletin board were 87.5% (mounting other cows only), 100% (mounting other cows but not standing), 80.0% (mounting other cows with standing for 1~4 seconds), 90.0% (mounting other cows but not standing for 1~4 seconds), 80% (mounting other cows with standing for more than 5 seconds) and 90.0% (mounting other cows but not standing for more than 5 seconds). When cow mounted other cows, the accuracy of estrus behavior displayed an electric bulletin board were 100% (mounted other cows but not standing), 100% (mounted other cows with standing for 1~4 seconds), 100% (mounted other cows but not standing for 1~4 seconds) and 100% (mounted other cows with standing for more than 5 seconds). Circadian distribution of first observed in estrus were 59.1% (am 8~pm 6) and 40.9% (pm 6~am 8). Distribution for the number of estrus behavior were 40.9% (less than 3 times), 36.4% (4~6 times) and 22.7% (more than 4 times). The conception rates relative to interval from first estrus behavior to insemination for estrus periods were 23.1% (less than 11 hours) and 55.6% (12~20 hours).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.29-36
• /
• 2004

This study deals with an analysis on the sinking resistance for the model purse seine, in the case of different netting material and sinkers. The experiment was carried out using rune simplified model seines of knotless nettings. Dimension of model seines 420cm for corkline and 85cm for seine depth, three groups of models rigged 25, 45 and 60g with the same weighted sinkers in water were used. These were named PP-25, PA-25, PES-25, PP-45, PA-45, PES-45, PP-60, PA-60 and PES-60 seine. The densitie($\rho$) of netting materials were 0.91g/cm$cm^3$, 1.14g/cm$cm^3$ and 1.38g/cm$m^3$. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. Differential equations were derived from the conservation of momenta of the model purse seines and used to determine the sinking speeds of the depths of leadline and the other portions of the seines. An analysis carried out by simultaneous differential equations for numerical method by sub-routine Runge-Kutta-Gill The results obtained were as follows : 1. Average sinking speed of leadline for the model seines rigged 60g with the same weighted sinkers in water was fastest for 12.2cm/sec of PES seine, followed by 11.4cm/sec of PA and 10.7cm/sec of PP seines. 2. The coefficient of resistance for netting of seine was estimated to be $K_D=0.09(\frac{\rho}{\rho_w})^4$ 3. The coefficient of resistance for netting bundle of seine was estimated to be $C_R=0.91(\frac{\rho}{\rho_w})$ 4. In all seines, the calculated depths of leadline closely agreed with the measured ones, each 25g, 45g, 60g of weighted sinkers were put into formulas meas.=1.04cal., meas.=0.99cal. and meas.=0.98 cal.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.4
• /
• pp.109-138
• /
• 2010

This study examined how practical reasoning process is reflected in the 2007 revised home economics textbook of the 7th grade that is being used in schools since 2010. For a textbook analysis of the components of practical reasoning process, 12 published textbooks were all analyzed, and analysis areas were decided by reconstructing the textbook system into introduction, body contents, learning activities, evaluation. Analysis criteria were extracted from the previous literatures. Practical reasoning process was classified into Valued Ends, Context and Background, Alternatives and Means, on sequence, and Action and Reflection. As a result of analyzing categories and problems that practical reasoning process is reflected in the textbook, firstly, here was a category, which Valued Ends was absent in the practical reasoning process. In the relevant category, general problem solving progress and practical reasoning process could not be differentiated, and activity was developed with 'strategies for solution' as objective. Second, there was a category that the practical reasoning process was reflected in body contents. In this category, knowledge, concept, principle, and theory were insufficiently dealt with. Third, there was a category that reflected components of practical reasoning process but was covered with general problem solving process. Fourth, there was a category that described theme of sub-unit and body contents from the different curriculum perspectives. A curriculum perspective works as the foundation of preparing class contents or consistency of methods when developing lessons. Therefore, confusion might occur when a teacher plans a class with this kind of textbook. Fifth, a category that suggested partial components of practical reasoning process was shown the most and this category is difficult to maximize effects of practical reasoning process.

• Clinical and Experimental Pediatrics
• /
• v.46 no.1
• /
• pp.56-66
• /
• 2003

Purpose : Human umbilical vein endothelial cells(HUVECs) play an important role in regulating blood flow by releasing vasoactive substances. It has been reported that endothelial impairment and dysfunction might be a primary cause of placental vascular disease, which is manifested clinically as preeclampsia in mother and intrauterine growth restriction in fetus. Furthermore, the frequency of apoptotic changes is increased in umbilical and placental tissues from growth-restricted pregnancies. However, the various mechanisms of umbilical endothelial cell apoptosis have not been broadly proposed. We investigate the effects of amiloride derivatives on apoptotic death of HUVECs and identify their ionic mechanism. Methods : HUVECs were purchased from Clonetics, and cultured on endothelial cell growth medium. MTT assay and flow cytometry were used for assessing cytotoxic effect and confirming the apoptosis. Changes in intracellular ion concentrations were measured with specific fluorescent dyes and fluorescence imaging analysis system. Results : Amiloride derivatives elicited cytotoxic effects on HUVECs with dose-dependent manners and the rank order of potency is HMA($IC_{50}\;11.2{\mu}M$), MIA>EIPA>>amiloride. HMA-induced cytotoxicity is dependent on extra- and intracellular pH, that is, increase extra- and intracellular pH augmented the cytotoxic effects of HMA. HMA dose-dependently reduced intracellular major ions, such as $K^+$ and $Cl^-$. Interestingly, the depletion of intracellular ions induced by HMA was also significantly enhanced at alkaline extracellular pH. Conclusion : Amiloride derivatives induce apoptosis of HUVECs with dose and pH dependent manners. They reduce intracellular $K^+$ and $Cl^-$ concentration, which is also extracellular pH dependent.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.145-152
• /
• 2010

Inveon PET is a recently developed preclinical PET system for small animal. This study was conducted to measure the performance of Inveon PET as recommended by the NEMA NU 4-2008. We measured the spatial resolution, the sensitivity, the scatter fraction and the NECR using a F-18 source. A 3.432 ns coincidence window was used. A $1\;mm^3$ sized F-18 point source was used for the measurement of spatial resolution within an energy window of 350~625 keV. PET acquisition was performed to obtain the spatial resolution from the center to the 5 cm offset toward the edge of the transverse FOV. Sensitivity, scatter fraction, and NECR were measured within an energy window of 350~750 keV. For measuring the sensitivity, a F-18 line source (length: 12.7 cm) was used with concentric 5 aluminum tubes. For the acquisition of the scatter fraction and the NECR, two NEMA scatter phantoms (rat: 50 mm in diameter, 150 mm in length; mouse: 25 mm in diameter, 70 mm in length) were used and the data for 14 half-lives (25.6 hr) was obtained using the F-18 line source (rat: 316 MBq, mouse: 206 MBq). The spatial resolution of the F-18 point source was 1.53, 1.50 and 2.33 mm in the radial, tangential and axial directions, respectively. The volumetric resolution was $5.43\;mm^3$ in the center. The absolute sensitivity was 6.61%. The peak NECR was 486 kcps @121 MBq (rat phantom), and 1056 kcps @128 MBq (mouse phantom). The values of the scatter fraction were 20.59% and 7.93% in the rat and mouse phantoms, respectively. The performances of the Inveon animal PET scanner were measured in this study. This scanner will be useful for animal imaging.

• The Journal of Korean Medicine
• /
• v.31 no.1
• /
• pp.81-92
• /
• 2010

Objectives: The objective of this study was to assess bra in activation and difference by LI11 or ST36 acupuncture stimulation using functional MRI (fMRI). Methods: A total of 10 healthy right-handed volunteers were studied. LI11 acupuncture and ST36 acupuncture stimulations were applied in order on the left. The block design paradigm of RARARA was used for the task, with R representing rest and A representing stimulation, and each period lasted 30 seconds. fMRI data were analyzed using SPM2. Results: The left LI11 acupuncture stimulation activated both sides of the inferior parietal lobule, the left side of the extra-nuclear, culmen and inferior semi-lunar lobules. On the right side, the nodule and midbrain regions were activated by the left LI11 acupuncture stimulation. The left ST36 acupuncture stimulation activated the right side of the superior frontal gyrus, middle frontal gyrus, superior parietal lobule, inferior semi-lunar lobule and pyramis. On the left side, the sub-gyral, middle temporal gyrus, fusiform gyrus, supramarginal gyrus, extra-nuclear, cingulate gyrus and fastigium regions were activated by the left ST36 acupuncture stimulation. Besides, both sides of the paracentral lobule, inferior parietal lobule, culmen, cerebellar tonsil and midbrain regions were activated. Conclusions: In conclusion, brain signal activation patterns according to acupoints were observed to differ, and ST36 acupuncture stimulation activated more regions than LI11. It is supposed that LI11 and ST36 acupuncture stimulations have an influence on motor function and sensory aphasia, and these stimulations thus represent potential for ocular motor dysfunction, discriminative touch or position sense disorder. Moreover, ST36 acupuncture stimulation activated the cingulate gyrus of the limbic system, so it seems to have an influence over autonomic functions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.93-105
• /
• 1993

In this paper, the maximum scour depths at piers located in the Bo Cheong Stream, which is a tributary in the Geum River System, were calculated and compared using 24 local pier scour equations. The equations were classified as six groups by non-dimensional types of equations. The geometric data in the stream bed and pier data at San Seong, Yi Pyung and San Gye, which are IHP data collection stations, were utilized for applying the scour equations. The geometric data in the stream bed were obtained by analyzing the bed material sampled in three stations which are in the left side, middle and right side for stream direction. The maximum flow velocities at maximum flow depths which were measured from 1982 to 1991, were used as the hydraulic flow data. The pier data for predicting pier scour depths were measured in the fields. The maximum pier scour depths calculated using the equations were compared with the held scour depths measured in the streams or rivers in the world. Arunachalam, Shen-Karaki III, Jain-Fischer equations are selected as the proper local scour equations for predicting the maximum local scour depths at piers in the Bo Cheong Stream. Inglis-Lacey and Shen-Karaki II equations are applicable in case of rapid flows conditions in which Froude number is over 0.3. Froehlich, Laursen I, Laursen II, Neill, Melville equations are applicable in the slow flow conditions in which Froude number is less than 0.3. Blench equation or Inglis-Poona equation varies rapidly by changing Froude numbers. Therefore the equations should not be used without careful considerations in selecting the applicable ranges. The maximum local scour depths calculated using Sarma-Krishnamurthy, Ahmad, Coleman, Varzeliotis, Larras, Bata, Chitale, Venkatadri, Basik-Basamily-Ergun, U.S.G.S., Shen I equations are usually less than the scour depths measured in the fields.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.3
• /
• pp.238-246
• /
• 1994

This experiment was carried out to determine the effects of seeding date and fall harvest method on the growth characteristics, forage yield and quality of winter rye(Seca1e cereale L.) at the forage experimental field, College of Agriculture and Life Sciences, SNU, Suweon from 5 September 1992 to 21 May 1993. The experiment was arranged in a split plot design with three replications. Main plots consisted of three harvests, no defoliation, cutting and grazing. Sub-plots consisted of seeding dates, early(5 September), mid(25 September) and late(l0 October). The results obtained are summari7d as follows; I . A 3-day difference in the first heading of rye was observed between no defoliation and fall grazing, while there was a 6day difference between early and late seeding dates. Therefore, the effect of seeding dates on the fist heading date of rye was larger than that of fall harvest methods. 2. CP content of rye with fall grazing was slightly higher averaged 16.5% compared with both fall cutting and no defoliated 1ye(15.6%). Mean CP content of rye at the early, mid and late seeding dates was 14.2, 14.5 and 19.1 %, respectively. 3. ADF content of rye was slightly higher with both fall cutting(29.99) and no defoliation(29.5%) than that of fall grazing(28.0%). ADF content of rye at the early, mid and late seeding dates was 30.7, 29.1 and 27.7%, respectively. Effect of fall harvest methods and seeding dates on NDF content of rye were similar to the observations made on ADF. 4. RFV and IVDMD of rye were lower with both no defoliation and fall cutting than fall grazing. but those of rye slightly increased with seeding dates progressed. 5. Dry matter yield of rye was the highest of 6,779 kg/ha with fall cutting, while the lowest yield of 6,240 kg/ha was obtained from no defoliation But no significant difference was found among the harvest methods. Dry matter yield of rye was significantly declined with later seedings. It is concluded that the highest forage yield of rye be possible from two harvest systems of fall and spring with earlier seeding rather than from one harvest system of spring.