• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.164-172
• /
• 2015

Seoul subway plays an important part for the public transportation service in Seoul metropolitan area. As the subway system is typically a closed environment, frequent air pollution problems occurred and passengers get malhealth impact. Especially particulate matters (PM) is well known as one of the major pollutants in subway environments. The purpose of this study was to compare the concentrations of $PM_{10}$ and $PM_{2.5}$ in the Seoul subway system and to provide fundamental data in order to management of subway system. $PM_{10}$ and $PM_{2.5}$ samples were collected in the M station platform and tunnel of Subway Line 4 in Seoul metropolitan and in an outdoor location close to it from Apr. 21, 2010~Oct. 27, 2013. The samples collected on teflon filters using $PM_{10}$ and $PM_{2.5}$ mini-volume portable samplers and PM sequential sampler. The PM contributions were $48.6{\mu}g/m^3$ (outdoor), $84.6{\mu}g/m^3$ (platform) and $204.8{\mu}g/m^3$ (tunnel) for $PM_{10}$, and $34.6{\mu}g/m^3$ (outdoor), $49.7{\mu}g/m^3$ (platform) and $83.1{\mu}g/m^3$ (tunnel) for $PM_{2.5}$. The $PM_{10}$ levels inside stations and outdoors are poorly correlated, indicating that $PM_{10}$ levels in the metro system are mainly influenced by internal sources. In this study, we compared PM concentrations before and after operation of ventilation and Electrostatic Precipitator (EP). Despite the increased PM concentration at outdoor, $PM_{10}$ concentration at platform and tunnel showed the 31.2% and 32.3% reduction efficiency after operation the reduction system. The overall results of this study suggest that the installation and operation of the ventilating system and EP should have served as one of the important components for maintaining the air quality in the subway system.

• 자원환경지질
• /
• 제43권4호
• /
• pp.359-369
• /
• 2010

본 연구는 서반부지역(북서부 소지역, 서부 소지역, 남서부 소지역)에 광역상수도용 수원지 개발을 위하여 굴착된 지하수공을 중심으로 대수층 체계를 분류하고, 수리지질 특성을 규명하였다. 북서부 소지역의 대수층 체계는 상부 투수층-상부 저투수층-하부 투수층-하부 저투수층으로 구성되고, 서부 소지역과 남서부 소지역의 대수층 체계는 상부 저투수층-투수층-하부 저투수층으로 구성된다. 투수량계수와 비양수량은 북서부 소지역, 서부 소지역, 남서부 소지역의 순으로 낮아진다. 비양수량과 응회암의 산출 고도는 비교적 높은 반비례 관계(상관계수 -0.848)를 보이며, 이는 응회암이 대수층의 밑바닥 역할을 하기 때문으로 판단된다. 3개 소지역에 대해서 2004년 수마트라 지진에 의한 지하수위 변동 분석결과, 북서부 소지역에서 평균 23.74 cm로 가장 크며, 서부 소지역에서는 평균 9.48 cm이고, 남서부 소지역 에서는 지하수위 변동이 나타나지 않았다. 그리고 지진에 의한 지하수위 변화는 투수량계수 및 비양수량과 정비례관계를 가지는 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.541-549
• /
• 2020

약물 전달 시스템(Drug Delivery System, DDS)은 인체에 발생한 질환을 치료를 할 때 약물을 효과적으로 투약하므로써 약물성분에 의한 부작용을 최소화하고, 약물의 효능을 최대한으로 크게하기 위해 기존의 알려진 성분의 약물이나 새로운 성분의 제형을 설계하여 환자의 약물치료 과정을 최적화하는 목적을 지향하는 기술로 정의된다. 본 연구에서는 Tripolyphosphate (TPP)의 농도가 키토산과의 가교결합을 통하여 제조되는 Chitosan nanoparticles (CNPs)의 크기에 미치는 영향을 측정하여 TPP의 농도가 낮을수록 작은 크기의 입자가 형성되는 것을 확인하였다. 그리고 산화철(Fe₃O₄)의 양에 따른 CNPs-Fe₃O₄의 특성을 측정하여 Fe₃O₄의 양이 많을수록 자성 약물 전달체로써의 특성이 잘 나타남을 확인하였다. 닌히드린 반응(Ninhydrin test)를 통하여 저농도 구간(0.004~0.02 wt%)에서는 Y = 0.00373 exp(179.729X) - 0.0114 (R² = 0.989), 고농도구간(0.02~0.1wt%)에서는 Y = 21.680X - 0.290 (R² = 0.999)의 γ-aminobutyric acid (GABA)의 농도에 따른 검량선을 얻었다. 이 검량선을 사용하여 흡수를 위하여 넣어주는 GABA의 양에 따른 최대 흡수율의 관계식 Y = -136.527 exp [(-90.0862)X] + 64.724 (R² = 0.997) 을 얻었으며, 초기에 넣어주는 GABA의 양이 약 0.04 g인 지점부터는 약 62.5%로 흡수율이 일정해 지고, 시간에 따른 GABA-Fe₃O₄-CNPs로부터 방출되는 GABA의 양을 측정하여 약 24 hr 이후부터 약물 방출이 종료되는 것을 확인하였다. 또한 최적의 조건에서 만들어진 GABA-Fe₃O₄-CNPs는 약 150 nm의 구형 입자이며, 그에 따른 입자의 특성이 잘 나타나는 것을 확인하여 약물 전달체로써 적합함을 알 수 있었다.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.187-196
• /
• 2021

Chemical equilibrium calculations for multicomponent aqueous systems involving the reductive dissolution of magnetite (Fe₃O₄) with oxalic acid (H₂C₂O₄) were performed using the HSC Chemistry® version 9. They were conducted with an aqueous solution model based on the Pitzer's approach of one molality aqueous solution. The change in the amounts and activity coefficients of species and ions involved in the reactions as well as the solution pH at equilibrium was calculated while changing the amounts of raw materials (Fe₃O₄ and H₂C₂O₄) and the system temperature from 25℃ to 125℃. In particular, the conditions under which Fe₃O₄ is completely dissolved at high temperatures were determined by varying the raw amount of H₂C₂O₄ and the temperature for a given raw amount of Fe₃O₄ fed into the aqueous solution. When the raw amount of H₂C₂O₄ added was small for a given raw amount of Fe₃O₄, no undissolved Fe₃O₄ was present in the solution and the pH of the solution increased significantly. The formation of ferrous oxalate complex (FeC₂O₄) was observed. The equilibrium amount of FeC₂O₄ decreased as the raw amount of H₂C₂O₄ increased.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.2081-2083
• /
• 2005

• 대한수학회보
• /
• 제58권6호
• /
• pp.1377-1385
• /
• 2021

In this paper, we consider a general number system with a base m in order to determine if a positive integer x is prime. We show that the base m providing the most efficient test is the primorial p_n# when p_n# < x < p_n+1# and establish a necessary and sufficient condition for x in between consecutive primorials to be determined as a prime number.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.791-797
• /
• 2022

Using the fatigue limit (△σ_unsm) and residual stress (σ_r) of the UNSM smooth specimen, the harmless maximum crack depth (α_hml) according to the crack aspect ratio (As) was evaluated. α_hml evaluated the reliability in the relationship between the minimum crack depth (α_NDI1, α_NDI2) detectable by nondestructive inspection(NDI) and the crack depth (α₂₅, α₅₀) that reduces the fatigue limit by 25% and 50%. All α_hml was determined by the crack depth. The α_hml of 80N UNSM with high σ_r and high △σ_unsm was found to be large. σ_r in the depth direction had a much effect on α_hml. Since α_hml>α₅₀(As=0.6-0.1) and α_hml>α₂₅, α₂₅ and α₅₀(some range) can secure the safety and reliability. Since α_hml<α₅₀ (As=1. 0-0. 6), it cannot be made harmless by UNSM. So safety and reliability cannot be secured. α_NDI1 and α_NDI2 are larger than α₂₅, α₂₅ cannot be detected by NDI. α_NDI1 and α_NDI2 are smaller than α₅₀, α₂₅ can detected by NDI.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.357-362
• /
• 2022

The low-temperature sinterability of TiO₂-CuO systems was investigated using a solid solution of SnO₂. Sample powders were prepared through conventional ball milling of mixed raw powders. With the SnO₂ content, the compositions of the samples were Ti_1-xSn_xO₂-CuO(2 wt.%) in the range of x ≤ 0.08. Compared with the samples without SnO₂ addition, the densification was enhanced when the samples were sintered at 900℃. The dominant mass transport mechanism seemed to be grain-boundary diffusion during heat treatment at 900℃, where active grain-boundary diffusion was responsible for the improved densification. The rapid grain growth featured by activated sintering was also obstructed with the addition of SnO₂. This suggested that both CuO as an activator and SnO₂ dopant synergistically reduced the sintering temperature of TiO₂.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권3호
• /
• pp.57-61
• /
• 2003

In this investigation, the 6.6kV/200A Inductive Superconducting Fault Current Limiter (SFCL) was designed and fabricated. The type of DC reactor for Inductive SFCL was determined as solenoid type during the period of $1${st}$ year research. The 5 bobbins for DC reactor were fabricated and each bobbin was wound with 4 stacked High-Tc superconducting (HTS) tapes and the 5 bobbins were connected in series. The critical current and inductance of DC reactor were simulated by Finite Element method (FEM) and compared with the measured results. The characteristics of DC reactor were enhanced in sub-cooled nitrogen system rather than in liquid nitrogen system. The procedures to accomplish the sub-cooled nitrogen system and the experimental results were introduced in detail. Moreover, the design of sub-cooled nitrogen cryogenic system for next year research was introduced in brief.

• 대한전자공학회논문지SD
• /
• 제39권4호
• /
• pp.72-83
• /
• 2002

본 논문에서는 공급 전압을 순수하게 소프트웨어적으로 제어함으로서, 하드웨어 구현이 간단하고 전력 소모를 효과적으로 줄이며 복잡한 인터페이스 회로가 필요 없는 새로운 저전력 VLSI 시스템 아키텍처를 제안하였다. 제안된 아키텍처는 클록 주파수-공급 전압 특성을 순수하게 소프트웨어적으로만 모델링하고, 시스템상의 여러 칩들에 대해서 각각 독립적으로 공급 전압을 제어하고, 주 클록 주파수 f/sub CLK/의 1/n인 f/sub CLK/, f/sub CLK/2, f/sub CLK/3...만을 클록 주파수로 허용하였다. 또한, 제안된 저전력 VLSI 시스템 아키텍처의 프로토타입 시스템을 제작하고 전력 소모를 측정하였다. 프로토타입 시스템은 기존의 상용 마이크로프로세서 평가 보드를 약간 수정하여 레벨 쉬프터와 전안 스위치와 같은 간단한 개별 소자만을 덧붙여서 제작되었으며, 0.58W이던 전력 소모가 0.12W로 감소함을 확인할 수 있었다.