• 대한임상검사과학회지
• /
• 제36권2호
• /
• pp.115-120
• /
• 2004

혼합 amino acid의 선택적 분리를 위해 bulk liquid membrane system을 이용하였으며, p-diamethylaminobenzaldehyde(DAB), sulfosalicylic acid (SSA), 1-naphtol이 amino acid의 선택적 분리를 위한 효과적인 carrier로 사용될 수 있음을 확인하였다. 그 결과 sulfosalicylicacid에 대해서 Ala에 대한 선택성을 관찰할 수 있었으며, 1-naphtol에 대해서는 염기성 상태에서 Leu을 약산성 및 중성상태에서는 Val을 선택적으로 분리할 수 있었다. DAB에 대해서는 강산성에서 Phe을, 강알카리 조건에서 Ile를 선택적으로 분리할 수 있었다. Separation mechanism은 SSA와 1-naphtol의 경우에는 ion pair mechanism으로, DAB의 경우에는 imine 결합의 생성반응으로 설명할 수 있었다. 따라서, Liquid membrane을 이용한 생체시료 내의 아미노산을 선택적으로 분리함에 유용성이 클 것으로 사료된다.

• 공업화학
• /
• 제8권6호
• /
• pp.1029-1033
• /
• 1997

본 연구에서는 $Na_2B_4O_7{\cdot}10H_2O$의 열분해 반응계를 이용하여 축열식 열교환기에 적용하기 위한 반응속도의 비등온 해석에 대한 기초연구를 수행하였다. $Na_2B_4O_7{\cdot}10H_2O/Na_2B_4O_7{\cdot}5H_2O$ 계에서 반응의 평형온도가 373K 이하의 저온 온도범위에서 화학축열재로 적합하였으며, 열효율이 일정하여 장시간 사용할 수 있었다. 계 내의 반응 개시온도는 가열속도 증가에 따라 저온 영역에서 고온영역으로 이동하였으며, 수증기 분압의 변화가 있어도 저하되지 않았다. 열분해 탈수반응에 의한 반응속도식의 차수는 0.67차로서 반응의 비등온 해석에 의하여 화학축열재로 사용할 수 있었다.

• 한국분무공학회지
• /
• 제25권1호
• /
• pp.21-26
• /
• 2020

The objective of this work is to numerically reveal the effect of equivalence ratio change on the simultaneous reduction of NO_X and soot emissions from the simulated-EGR compression ignition engine containing CO₂. An experiment was conducted by using a single-cylinder common-rail injection system engine, an intake control system, and exhaust emissions analyzers. The numerical analysis results were validated under the same experimental conditions. To investigate the effect of equivalence ratio by simulated-EGR containing CO₂, the O₂, N₂, and CO₂ mole fraction were changed in the initial air conditions to the cylinder. The results were analyzed in terms of peak cylinder pressure, indicated mean effective pressure, indicated specific nitrogen oxide, and indicated specific soot. It was revealed that ignition delay characteristics and heat release rate (ROHR) characteristics were not significantly different according to the equivalence ratio. However, as the equivalence ratio increased from 0.68 to 0.83, the maximum combustion pressure and IMEP decreased by about 6.5% and 9.4%, respectively. In the case of ISFC, as is well known, the trend is opposite of IMEP. In the case of ISNO, as the equivalence ratio increased, less NO was generated, and as the equivalence ratio increased by 0.05, the ISSoot value of about 10% increased.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.137-141
• /
• 2005

Spinel계 유화물 $Zn_xFe_{1-x}Cr_2S_4$(x=0.05, 0.1, 0.2)에 대하여 X선 회절법, 자기저항측정, $M\ddot{o}ssbauer$ 분광법을 이용하여 CMR 특성과 자기적 성질을 연구하였다. 결정구조는 상온에서 입방정으로 정상 spinel 구조를 갖는 것으로 나타났다. 자기저항 실험결과 160K 부근 이하에서는 반도체적 전기전도 특성을 보이며, Curie 온도부근에서 최대자기저항 온도가 나타났다. Zn 조성값이 증가함에 따라 Jahn-Teller 효과에 의한 완화 현상이 증가되었으며, 전기 사중극자 이동값 역시 증가되고, 초미세 자기장값은 감소하였다. CMR 특성은 heterovalency에 의한 이중교환 상호작용이나, $Fe^{2+}$와 $Cr^{3+}$ 그리고 $Fe^{3+}$ 사이의 삼중교환 상호작용과는 다른 동적 Jahn-Teller 효과에 의한 도체-반도체전이와 절반 금속성 에너지 밴드구조에서 스핀전자 전이에 의하여 발생되는 것으로 예측된다.

• 한국자기학회지
• /
• 제23권2호
• /
• pp.43-48
• /
• 2013

Chalcogenide $Fe_{0.9}M_{0.1}Cr_2S_4$(M=Co, Ni, Zn)에 대하여 X-선 회절법, 자기저항측정, Mossbauer 분광법을 이용하여 CMR특성과 자기적 성질을 연구하였다. 10 at%의 M 치환에서는 상온에서 입방정으로 정상 spinel 구조를 갖는 것으로 나타났다. 자기저항 실험결과 $T_C$ 부근에서는 도체-반도체 전이의 특성을 보이며 최대자기저항 온도가 나타났다. M$\ddot{o}$ssbauer 분광 실험 결과에서 Fe에 대한 Ni 치환은 초교환 상호작용을 강화시키고 Jahn-Teller 효과에 의한 완화 현상의 심화를 보여준다. CMR 특성은 망간산화물의 $Mn^{3+}$와 $Mn^{4+}$ 사이의 이중교환상호작용과 다르게 동적 Jahn-Teller 효과와 관계된 polaron에 기인한 도체-반도체 전이 의한 것으로 해석된다.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.93-100
• /
• 2013

Two-step thermochemical cycle using ferrite-oxide($Fe_2O_4$) device was investigated. The $H_2O$(g) was converted into $H_2$ in the first experiment which was performed using a dish type solar thermal system. However the experiment was lasted only for 2 cycles because the metal oxide device was sintered and broken down. Another problem was that the reaction was taken place mainly on a side of the metal oxide device. The m-$ZrO_2$, which was widely known as a material preventing sintering, was applied on the metal oxide device. The ferrite loading rate and the thickness of the metal oxide device were increased from 10.67wt% to 20wt% and from 10mm to 15mm, respectively. The chemical reactor having two inlets was designed in order to supply the reactants uniformly to the metal oxide device. The second-experiment was lasted for 5 cycles, which was for 6 hours. The total amount of the $H_2$ production was 861.30ml. And cerium oxide($CeO_2$) device was used for increasing $H_2$ production rate. $CeO_2$ device had low thermal resistance, however, more $H_2$ production rate than $Fe_2O_4$ device.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.220-225
• /
• 2008

Lead-free ferroelectric ceramics are widely researched today for industrial applications as sensors, actuators and transducers. Since $Pb(Zr_aTi_{1-a})O_3$-(PZT) has high Curie temperature($T_C$), high piezoelectric properties near its morphotropic phase boundary(MPB) composition and small temperature dependence electrical behavior, it has been used to commercial materials for wide temperature range and different application fields. According to the tolerance factor concept, since the $Bi^{3+}$ cation with 12-fold coordinate has a smaller ionic radius than 12-fold coordinate $Pb^{2+}$, most bismuth based perovskites possess a smaller tolerance factor. Therefore, MPBs with a higher $T_C$ may be expected in $Bi(Me^{3+})O_3PbTiO_3$ solid solutions. As in lead based perovskite systems, it is clear that we need to explore more materials in simple or complex bismuth based MPB systems. The objective of this study is to investigate the $Bi(Ni_{1_a}X_a)O_3-PbTiO_3(X=Ti^{4+},\;Nb^{5+})$ perovskite solid-solution. For improving the electronic conduction problem, the magnesium and manganese modified system was also studied.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.74-80
• /
• 2023

Gallium oxide (Ga₂O₃) thin films were grown on c-, a-, m-, r-plane sapphire substrates using a mist chemical vapor deposition system. Various growth temperature range of 400~600℃ was applied for Ga₂O₃ thin film deposition. Then, several structural properties were characterized such as film thickness, crystal phase, lattice orientation, surface roughness, and optical bandgap. Under the certain growth temperature of 500℃, all grown Ga₂O₃ featured rhombohedral crystal structures and well-aligned preferred orientation to sapphire substrate. The films grown on c-and r-plane sapphire substrates, showed low surface roughness and large optical bandgap compared to those on a-and m-plane substrates. Therefore, various sapphire orientation can be potentially applicable for future Ga₂O₃-based electronics applications.

• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.23.1-23.11
• /
• 2021

Objectives: This study assessed the reliability of digital color measurements using images of resin composite specimens captured with a cellphone. Materials and Methods: The reference color of cylindrical specimens built-up with the use of resin composite (shades A1, A2, A3, and A4) was measured with a portable spectrophotometer (CIELab). Images of the specimens were obtained individually or pairwise (compared shades in the same photograph) under standardized parameters. The color of the specimens was measured in the images using RGB system and converted to CIELab system using image processing software. Whiteness index (WI_D) and color differences (ΔE₀₀) were calculated for each color measurement method. For the cellphone, the ΔE₀₀ was calculated between the pairs of shades in separate images and in the same image. Data were analyzed using 2-way repeated-measures analysis of variance (α = 0.05). Linear regression models were used to predict the reference ΔE₀₀ values of those calculated using color measured in the images. Results: Images captured with the cellphone resulted in different WI_D values from the spectrophotometer only for shades A3 and A4. No difference to the reference ΔE₀₀ was observed when individual images were used. In general, a similar ranking of ΔE₀₀ among resin composite shades was observed for all methods. Stronger correlation coefficients with the reference ΔE₀₀ were observed using individual than pairwise images. Conclusions: This study showed that the use of cellphone images to measure the color difference seems to be a feasible alternative providing outcomes similar to those obtained with the spectrophotometer.

• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.21-29
• /
• 2024

1H,1H,2H,2H-perfluorodecytriethoxysilane (C₁₆H₁₉F₁₇O₃Si) be successfully applied to the hydrophobic modification of Al₂O₃ tubular ceramic membrane. Taking the concentration of modification solution, modification time, and modification temperature as factors, orthogonal experiments were designed to study the hydrophobicity of the composite membranes. The experiments showed that the modification time had the greatest impact on the experimental results, followed by the modification temperature, and the modification solution concentration had the smallest impact. Concentration of the modified solution 0.012 mol·L^-1, modification temperature 30 ℃ and modification time 24 h were considered optimal hydrophobic modification conditions. And the pure water flux reached 274.80 kg·m^-2·h^-1 at 0.1MPa before hydrophobic modification, whereas the modified membrane completely blocked liquid water permeation at pressures less than 0.1MPa. Air gap membrane distillation experiments were conducted for NaCl (2wt%) solution, and the maximum flux reached 4.20 kg·m^-2·h^-1, while the retention rate remained above 99.8%. Given the scarcity of freshwater resources in coastal areas, the article proposed a system for seawater desalination using air conditioning waste heat, and conducted preliminary research on its freshwater production performance using Aspen Plus. Finally, the proposed system achieved a freshwater production capacity of 0.61 kg·m^-2·h^-1.