• The Korean Journal of Elementary Counseling
• /
• v.8 no.1
• /
• pp.51-66
• /
• 2009

This study aims at examining how it becomes to change the interpersonal cognitive problem solving ability development of elementary rejected children when teacher practices counseling strategy in classroom To do this, 130 fifth-graders of 4 classrooms from H Elementary School in B City went through Ahn Ie-hwan's(2007) social status type system by using the peer nomination, Then, 21 children were labeled as rejected children. Among them, 16 children were divided into experimental group & control group, 8 for the each group. In order to improve the interpersonal cognitive problem solving ability of rejected children with teacher's counseling strategy in classroom used in this study, 5 weeks activity made according to the level of classroom was carried out in four sides, that is, setting of classroom structure-environments, classroom activities, counseling activities, cooperative learning method, referring to Dreikurs'(1971) 'The counseling strategy in classroom' composed of self-discipline, cooperation, mutual respect, shared responsibility, and social equality. This study obtained the following results. First, There was a significant effect in improving the interpersonal cognitive problem solving ability of rejected children. Looking into sub-factors, there was a significant effect in improving consequential thought and method-ends thought except alternative solution thought and causal thought. Second, there was a significant difference in social status & change of 5 types of children in social status in the respective classrooms when those of the experimental group where teacher's counseling strategy in classroom carried out and those of the control group where teacher's counseling strategy in classroom not carried out were compared. To conclude the results mentioned above, We can see the fact that the counseling strategy in classroom positively affected interpersonal cognitive problem solving ability.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.366-375
• /
• 2008

Generally a return current plane(RCP) of high speed digital and analog part is partitioned. This is achieved in order to decrease the noise interference between subsystem in PCBs(Printed Circuit Boards). However, when the connected signal line exists between each sub system, this partition will cause unwanted effects. In a circuital point of view, RCP partition has a bad influence upon signal integrity. In a EMI(Electromagnetic Interference) point of view, the partition of the return current plane becomes a primary factor to increase the radiated emission. Component bridge(CB) is usecl for the way of maintaining signal integrity, still specific user's guide doesn't give sufficient principle. In a view point of signal integrity, design principle of multi-CB using method will be analyzed by measurement and simulation. And design principle of noise mitigation will be provided. Generally interval of CB is ${\lambda}/20$ ferrite bead. In this study. When multi-CB connection is applied, design principle of ferrite bead and chip resistor is proved by measurement and simulation. Multi-connected chip resistance$(0{\Omega})$ is proved to be more effective design method in the point of signal integrity.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.81-98
• /
• 2020

In this study, forest-related research papers published in North Korean journals were analyzed to understand the research trends in North Korean forest science. The Korea Science and Technology Information Institute (KISTI) North Korea Science and Technology Network (NKtech) is constructing a database related to science and technology in North Korea. From this, a total of 1,389 articles published from 1962 to 2016 were collected with forest science key words based on the South Korean National Science and Technology Standard Classification System. The topics were divided into four categories: afforestation, forest protection, forest use, and forest management. In the field of afforestation, research activities on nursery and agroforestry were active, and the survival rate was emphasized. In the forest protection field, there was a significant research effort into forest pests, and efforts were being made to reduce soil erosion through agroforestry. In the field of forest use, research activities on pulp/paper and mushrooms were active. In the forest management field, activities related to "ecological information" were conspicuous, and efforts were being made to reduce carbon. These results suggest that the perspective of North Korean forest research has changed from nature reorganization to nature protection. Thus, a comparative study on forest science and technology in each sub-sector of the forest research field, along with analysis of the relationship between policy direction and research direction of North Korea over time, would be worthwhile future investigations. To overcome the problem of technical terminology, a compilation/dictionary of inter-Korean forestry terminology would be useful for effective communication between the two Koreas.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.421-432
• /
• 2010

In Korea, about 80 academic departments related to fire science are in operation throughout the country, but fire science is not included as a branch science in the science classification system acknowledged by the Ministry of Education, Science and Technology and its position as a science is not solid yet. In response to this problem, research is being made actively to establish fire science recently. This study aims at composing the fire service policy theory which is one of sub areas of fire science. First, the concept of fire service policy should be established, and fire service policies should be divided into different types. In addition, it is necessary to examine the direction of the development of fire service policies in Korea, and the unique characteristics of fire service policies should be described. Next, we will mention fire service policy making and participants, theories on the determinants of fire service policies, the execution of fire service policies, and the evaluation of fire service policies. Particularly, based on the peculiarity of fire service, it is necessary to explain policies on fire prevention and precaution, fire investigation, rescue and first aid, public campaigns for safety and prevention, fire insurance, etc. Finally, we suggest the future directions of fire service policies according to the change of environment in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1261-1265
• /
• 2003

Axial piston pumps of bent axis have been commonly used in hydraulic systems because of high pressure level. best efficiency, low shear force on pistons and low operating costs. The other side, they have a few demerits like that they have the relatively high number of moving parts and more discharge pressure ripples. Especially, the discharge pressure ripples bring about vibrations and noises in hydraulic system components such as connecting pipes and control valves, so that these deteriorate the stability and accuracy of the systems. Therefore, the hydraulic systems having the axial piston pumps of bent axis require the methods to reduce the discharge pressure ripples. So, the purpose of this paper is to reduce the discharge pressure ripples by the phase interference of pressure wave and to develope the analysis model of the pumps to predict the discharge pressure ripples. In this paper, the analysis model of the axial piston pumps of bent axis was developed using the AMESim software, and the reliability of that was verified by the comparison with the experimental results. The hydraulic pipeline with a parallel line was used as the method to generate the phase interference of pressure wave. the dynamics characteristics of the hydraulic pipeline with a parallel line were analyzed by a transfer matrix method. the usefulness of the phase interference of pressure wave was investigated through the experiment and simulation. The results from the experiment and simulation said that the phase interference of pressure wave by the hydraulic pipeline with a paralle linel could reduce the discharge pressure wave of the pump well. The analysis model of the axial piston pumps of bent axis developed in this paper and the method of the phase interference by the hydraulic pipeline with a parallel line are expected to be helpful to achieve the design of the pump and to reduce the discharge pressure wave of the pump effectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.717-725
• /
• 2018

IMO developed VIMSAS for effective application of IMO instruments related to maritime safety and environmental protection and was implemented from 2006 to 2016. Based on this, the purpose and procedures of VIMSAS applied to IMO member states by trial, and IMSAS was enforced from January 1st 2016. IMSAS was implemented to ensure that IMO Member States, such as flag states, coastal states and port states that ratified the IMO Convention, are properly performing their given responsibilities and to ensure the effective implementation of the IMO instruments through the improvement of identified non-conformities. In this study, the auditing contents and procedures were verified based on IMO documents in order to prepare for the IMSAS audit of Republic of Korea scheduled for 2020. For this purpose, this study proposed an update of a directory, development of monitoring system for information reporting required by IMO instruments, designation of relevant experts, preparation of an English version of related national laws, training of IMSAS auditors and establishment of an IMSAS audit response team for audit of IMSAS in 2020 by referring to the results of the VIMSAS for Republic of Korea, major findings of the VIMSAS of other IMO member states, and Consolidated Audit Summary Report (CASR), which was submitted at the 5th IMO III sub-committee.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.221-232
• /
• 2008

Rock bolts have been installed into rockmass as a main support system. In order to evaluate the rock bolt integrity using non-destructive technique, the transmission method of the guided ultrasonic wave has been successfully performed. For the transmission method, however, the source for the generation o# guided ultrasonic waves should be installed at the end of the steel bar during construction of the rock bolt in the field. The purpose of this study is to suggest a reflection method that the source and the receiver are installed on the head of the steel bar. The reflection method is compared with the transmission method using non-embedded rock bolts and rock bolts embedded in concrete block. In this experiment, the piezo disc element is used as the source and the AE sensor is used as the receiver. The wavelet transform is applied to determine the energy velocity. The experimental studies show that the reflection method produces almost identical value of the transmission method, and the energy velocity increases with the defect ratio. This study suggests that the reflection method of the guided ultrasonic wave may be a suitable method fur the rock bolt integrity evaluation in the field.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.921-932
• /
• 2010

Metropolitan railway headway is calculated and decided by external conditions such as appropriate level of service and competitiveness rather than passenger demand for the peak time which is based on transport passenger capability of train. On contrast of inter-city urban railways, train time intervals of sub-urban metropolitan railway were fixed more than 20 mins in the peak time which results in low level of convenience. Big gap of headway brings a vicious circle of deteriorating competitiveness and decreasing the number of customers. Also this time gap of train interval results in stagnation of passenger demand, and makes it difficult to reduce headway. This thesis is a basic research to identify headway problems and their solutions of metropolitan railway. This thesis suggests passenger demand and the calculated standard for setting the headway, and reviews the level of passenger crowdedness, the numbers of coach for each train and time-competitiveness. At the last, thesis suggests the need for making headway by means of train services throughout benefit & cost analysis. And it also recommends the improved calculating method of setting up headway considering the different train headway standards by regional situation, flexibility in the number of coaches for a train, government policy to activate railway business and the need for setting up the standard for train service level.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.471-478
• /
• 2010

Thin films play an important role in many technological applications including microelectronic devices, magnetic storage media, MEMS and surface coatings. It is well known that a thin film's material properties can be very different from the corresponding bulk properties and thus there has been a strong need for the development of a reliable test method to measure the mechanical properties of a thin film. We have developed an alternative and convenient test method to overcome the limitations of previous membrane deflection experiment and uniaxial tensile test by adopting a white light interferometer having sub-nanometer out-of-plane displacement resolution. The freestanding aluminium specimens are tested to verity the effectiveness of the test method developed and get the tensile properties. The specimens are 0.5 rum wide, $1{\mu}m$ thick and fabricated through MEMS processes including sputtering. 1 to 5 specimens are fabricated on Si dies. The membrane deflection experiments are carried out by using a homemade tester consisted of a motor-driven loading tip, a load cell, and 6 DOF alignment stages. The test system is compact enough to set it up beneath a commercial white light interferometric microscope. The white light fringes are utilized to align a specimen with the tester. The Young's modulus and yield point stress of the aluminium film are 62 GPa and 247 MPa, respectively.

• Radiation Oncology Journal
• /
• v.30 no.3
• /
• pp.132-139
• /
• 2012

Purpose: The purpose of this prospective multi-institutional study was to evaluate the nutritional status of patients undergoing radiotherapy (RT) for treatment of head and neck, lung, or gastrointestinal cancer. Materials and Methods: A total of 1,000 patients were enrolled in this study at seven different hospitals in Seoul, Korea between October 2009 and May 2010. The nutritional status of patients after receiving 3 weeks of RT was evaluated using subjective global assessment (SGA). The nutritional status of each patient was rated as well nourished (A), moderately malnourished (B), or severely malnourished (C). Results: The mean age of patients in this study was $59.4{\pm}11.9$ years, and the male to female ratio was 7:3. According to the SGA results, 60.8%, 34.5%, and 4.7% of patients were classified as A, B, or C, respectively. The following criteria were significantly associated with malnutrition (SGA B or C; p < 0.001): loss of subcutaneous fat or muscle wasting (odds ratio [OR], 11.473); increased metabolic demand/stress (OR, 8.688); ankle, sacral edema, or ascites (OR, 3.234); and weight loss ${\geq}5%$ (OR, 2.299). Conclusion: SGA was applied successfully to assess the nutritional status of most patients. The prevalence of malnutrition in a radiation oncology department was 39.2%. The results of this study serve as a basis for implementation of nutrition intervention to patients being treated at radiation oncology departments.