• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.203-206
• /
• 2001

This paper presents a straightness measurement system for flat and long workpieces. The measurement system consists of a laser optical unit, a CCD camera and processing system, and a carrier system with a stylus. The carrier system accompanies the stylus, which displaces a retroreflector along the surface profile. The optical unit is used to optically amplify the displacement of retroreflector. The CCD camera and processing system finally identifies the vertical displacement of the stylus unit. The developed system is applied to two surfaces: ground surface and LM guide surface. The experimental results show that the developed system can measure the straightness of flat surfaces within sub-micron error.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.172-172
• /
• 2000

진공상태에서 diamond stylus로 MgO 표면을 마모시킬 때 발생되는 photon, electron과 마찰력을 시간의 함수로 동시에 측정하였다. 전자 방출(EE)은 Channeltron electron multiplier로 , 광자 에너지는 Photomultiplier tube를 사용하여 측정하였는데 180~600nm 영역의 photon을 검출하였다. 광자 방출(PhE,) 실험은 공기중에서도 할 수 있으나 전자방출은 1$\times$10-4pa 이하의 진공에서 실험하여 얻었다. 본 실험을 통하여 결정과 diamond stylus 사이에서 일어나는 마모 현상은 millisecond로 관찰하여 표면 변화에 대한 상관관계를 조사하였다. 열처리 한것과 열처리 하지 않은 시료를 비교한 결과 3개의 signal(마찰력, PhE, EE)을 시간에 따라 분석하면 stick-slip-like 현상을 볼 수 있었다. 이것으로 보아 stick은 변형에 의해 생기고 ms 후에 벽개 현상이 발생됨을 볼 수 있다. 방출과 마찰력은 표면조건, load, stylus velocity에 따라 변하였다. luminescence는 주로 변형에 의해 생겼으며, 전자 방출은 벽개(fracture)에 의해 발생됨을 알 수 있었다. 시료의 처리과정과 load 속도에 따른 Photon, electron의 방출은 시료의 표면 상태에 따라 좌우되었다. 마찰력, PhE, EE의 시간에 따른 분석에서 PhE는 변형 과정에 민감하며, EE는 stylus velocity에 의존하였다. 이러한 방출 현상은 세라믹의 급격한 벽개 과정을 이해하는데 많은 도움을 주었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.152-153
• /
• 2003

A reliable algorithm was developed for the analysis of the machined aspheric surfaces with the stylus instrument. The research was done prior to the evaluation of the uncertainties in the aspheric surfaces analysis, which essentially require the knowledge on the algorithm. The developed algorithm considered two important factors： pickup configuration(pivoted arm) and the stylus radius. (omitted)

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.108-120
• /
• 1996

A new technique and theory are proposed which correct orientation of a cylinder to perform a reliable measurement of the surface profile. We analyze characteristics of machined surfaces, e.g., ground, lapped and turned surfaces. Based upon the results. the optimum correction technique is derived by the statistical method. To verify the techinques, measurements are carried out by using the contact stylus profilometer on a controllable table. The measurement shows that surface information of cylinders can be acquired with high accuracy.

• Digital Contents
• /
• no.9 s.124
• /
• pp.188-191
• /
• 2003

디지털카메라의 보급과 더불어 디지털 사진 인쇄에 대한 관심이 어느 때보다 높아지고 있다. 여전히 온라인 인화 업체들이 강세를 보이고는 있지만, 이젠 웬만한 잉크젯프린트로도 사진품질의 출력물을 기대할 수 있을 만큼 프린터의 성능이 우수해졌다는 인식이 자리를 잡으며, 포토프린터가 큰 주목을 받고 있다. 이러한 상황에 발맞춰 엡손코리아는 기존의 최상급 포토프린터 'EPSON STYLUS PHOTO 925'의 후속모델로서 다양한 기능과 편의성을 업그레이드한 프리미엄 포토프린터 'EPSON STYLUS PHOTO 935'를 새롭게 출시했다.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.1
• /
• pp.57-64
• /
• 2016

Pen-based interaction is universally available on smart devices and especially on Tablet PCs. Previous studies compared various input methods like fingers, a mouse or a stylus pen on PCs or on a touchscreen based devices such as smart phones. At the same time, various soft keyboard applications are being developed on application stores of smart devices. However, these previous studies did not suggest which one is a suitable keyboard application for Tablet PCs when users perform a certain interaction as input type. In this study, we compared two types of input methods (finger and pen) and three types of soft keyboard applications (QWERTY, Gesture and Swype) in a Tablet PC using performance measurements (accuracy and input speed) and discussed what types of applications showed better performance with each interaction on tablet PC. From these results, recommendations for the keyboard types depending on the input methods on tablet PCs were developed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.37-49
• /
• 2000

It was clinically important to substitute the physiologic centric relation to the therapeutic position of the patients who needed the oral rehabilitation or occlusal treatment. There were several methods for recording the centric relation. One of the known methods was to use the gothic arch tracer. However the existing intraoral device was difficult to adjust the three dimensional angulation of the recording plate and recording stylus depending on the hinge movement arch of the individual. The purpose of this study was to develop new intraoral tracer which had adjustable stylus within hinge movement arch for the record of centric relation and to evaluate the clinical application of this device. The results were as follow; 1. A stylus of new developed intraoral tracer was so adjustable that the recording of mandibular positions could be reproducible within the hinge movement arc. 2. A record plate of new developed intraoral tracer was so adjustable to parallel with the occlusal plane that lateral recording of mandibular position was able to obtain stably. This study showed that new developed intraoral tracer allowed the determination of the treatment position which can be used in the full mouth rehabilitation and occlusal treatments.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.10
• /
• pp.15-21
• /
• 2015

In this paper, we propose a stable automatic signature verification algorithm applicable to various smart devices. The proposed algorithm uses real and forgery data all together, which can improve the verification rate dramatically. As a tool for signature acquisition in a smart device, two applications, one using touch with a finger and the other using a pressure-sensing-stylus pen, are developed. The verification core is based on SVM and some modifications are made to include the characteristics of signatures. As shown in experimental results, the minimum error rate was 1.84% in the SVM based method, which can easily defeat 4.38% error rate with the previous parametric approach. Even more, 2.43% error rate was achieved with the features excluding pressure-related features, better than the previous approach including pressure-related features and only about 0.6% more error than the best result, which means that the proposed algorithm can be applied to a smart device with or without pressure-sensing-stylus pens and used for security purposes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.73-74
• /
• 2000

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.395-401
• /
• 2015

We investigated the six remaining Yang-cheon-cheoks (量天尺), which were first described in the Veritable Record of King Sukjong (肅宗實錄). These woodblock sundials from Korea are structurally very similar to a Gyupyo (圭表, gnomon) or an altitude sundial and are light, compact, and portable. The front side of a Yang-cheon-cheok has two holes for styluses and several hour-lines. We compared the intervals of the hour-lines from the originating point of the stylus placement on all Yang-cheon-cheoks and found that two of the relics had the same hour-lines using the standard of the unit of 1 chon (寸). These two were actually the same sundial although the physical size was different. In spite of the lack of time accuracy, we hypothesize that various-sized Yang-cheon-cheoks were made and widely distributed throughout the public in the late Joseon Dynasty.