• 한국의류학회지
• /
• 제24권1호
• /
• pp.128-137
• /
• 2000

A range of suede-like samples were collected including woven fabric type, nonwoven fabric type, and natural suede(sheep). The surface textures of these suede-like fabrics are rather diverse and different from the plain filament type fabrics since there are a lot of fine surface free fiber ends. Physical and mechanical measurements were carried using the KES equipments. Based on the Kawabata-Niwa translational equation, primary hand values and THV were calculated. Uniaxial tensile tests were performed. Using glossmeter, the reflectance pattern was analyzed at different incidence and receiving angles. In order to capture the surface images of the specimens, a CCD camera and frame grabber connected to a PC were employed. The reflectance uniformity of the images was measured with line-profile analysis and standard deviation values of the profile of the images were calculated. After the multiscale wavelet transfermation, correlation among the transformed image was analyzed at each scale. The reflectance uniformity of the natural suede was better than that of nonwoven type suede, while that of woven type suede was the last among the selected three samples(natural suede, nonwoven type, woven type). The correlation analysis among images has shown the possibility of using the wavelet transformation of the images as one of the measures to detect similarities among the textured specimens.

• 농업과학연구
• /
• 제49권1호
• /
• pp.151-162
• /
• 2022

This study was conducted to develop a rail-type boom sprayer, performing safe spraying with improved ergonomic postures during pesticide spraying of agro-photovoltaic power system. The sprayer was designed to reduce labor cost and to be safe from pesticide exposure, and was analyzed through a comparison with a conventional spray method. The rail-type boom sprayer, consisted of a self-propelled spray and hose winder, hose, and boom sprayer parts, was designed to automatically pull and spray in the vertical and horizontal directions. The performance of the sprayer for an agro-photovoltaic power system was appropriate. From the analysis of postures with the Ovako Working posture Analysis System (OWAS), Rapid Entire Body Assessment (REBA), and Rapid Upper Limb Assessment (RULA) methods, the musculoskeletal risk factors to the body using the rail-type boom sprayer were less than those with the conventional power sprayer. In addition, the possibility of pesticide poisoning was reduced compared to the conventional power sprayer. The working capacity with the rail-type boom sprayer was more than five times greater, compared with the conventional power sprayer. After performing pesticide spraying with the rail-type boom sprayer, the labor cost was reduced to 42,750 won·yr^-1, which was 90% (402,750 won·yr^-1) less than the cost with the use of a conventional power sprayer (445,500 won·yr^-1).

• 대한지구과학교육학회지
• /
• 제7권1호
• /
• pp.64-74
• /
• 2014

The purpose of this study was to analyze the types of questions of energy field in the elementary science textbooks and to know the preference types of questions of students by grade. To accomplish this study, the analyzing framework on the types of questions was made and ensured the validity. To know students' preference types of questions, a questionnaire was made and the survey was conducted to the students of D elementary school in B city. The results can be summarized as follows: First, of the questions in the elementary science textbooks, the types of limited question were the most frequent(56%) and the next was the type of relevant question(41.82%). In the type of limited question, the element of propositional type was the most frequent and in the type of relevant question, the element of applicable type was the most frequent. Second, from the result of analyzing students' preference types of questions by grade using questionnaire, we could find as follows. Most of the graders chose retrospective type of question as the easy types of questions. And 3, 4, 6th graders chose justificative type and 5th graders chose applicable type as the difficult ones. Third, as interesting type and want-to-select type, 3th graders students chose propositional type and 4, 5th graders chose retrospective type and 6th graders chose inferring type.

• 한국생활과학회지
• /
• 제18권6호
• /
• pp.1303-1314
• /
• 2009

The purpose of this study lies in examining the characteristics of differentiated body types for plus-size women and obtaining basic data for the wide-ranging choices of ready-made clothing in a consumer's place. The results of this study displayed no significant differences for subjects in their 30s and 40s in comparison to standards by ages but showed a significant difference with subjects in their 50s when compared with the data from Size Korea (2004). Research data in the height and length categories were lower, and the majority of data from the other categories were higher. In order to analyze the characteristics of a plus-size woman's body, 4 factors were differentiated into 3 types with 17 categories: Factor 1 was the element of the thickness of the trunk, factor 2 was the element of the thickness of the lower body and legs, factor 3 was the element of shoulder size and factor 4 was the element of the upper body length. The accumulation rate was shown to be 74.47%. The characteristics for each type were as follows: Type 1 is a body type with a relatively thin waist, small width and girth of upper body and curvy lower body, type 2 is the average body type, and type 3 is a body type with big breasts and abdominal obesity. The standard body type belonged to type 2. According to the correspondency test between age and type, the characteristics of type 1 corresponded relatively close to the measures of subjects in their 40s and relatively far from subjects in their 30s to 50s while type 2 and type 3 appeared to be similar to subjects in their 50s.

• 한국의류학회지
• /
• 제19권6호
• /
• pp.995-1007
• /
• 1995

The purpose of this study is to examine on breast shapes of elderly women and provide fundamental data for developing brassiere. Numerous anthropometric measurements and other related data from 398 subjects were analyzed by various statistical methods such as ANOVA, Correlation analysis, Factor analysis and Cluster analysis. 1. Analysis of Breast Measurements The subjects were categorized into three groups(Group I; aged 55 to 64, Group II; aged 65 to 74, Group III; aged more than 75). 1) The results of the comparative analysis of anthropometric data from three groups show that by getting older: - $\circled1$ Breast lengths, widths, heights and bust girths are decreased significantly $\circled2$ Various length measurements related to the drooping degree of breast are increased $\circled3$ Some measurements related to the volume of breast are decreased. 2) The results of the correlation analysis among measurement show that there are no directs linear relationships between under bust girth and bust drooping. Further it turned out that the cup size could be used as a factor explaining the volume of breast due to large subject variation, Thus it is required to have more specific information about the breast volume. 2. Analysis of Breast Shapes 1) From 17 measurements, 5 factor were selected as key factors for the factor analysis of breast analysis of breast shapes. The 5 factors are: $\circled1$ Drooping degree of breast $\circled2$ slope between breast and chest, width of bust point $\circled3$ Contours and prominence of breast at the point of front and side $\circled4$ Breast volume $\circled5$ Breast width. 2) We categorized the breast shapes into three types by Cluster analysis. Type 1 is the most common breast shape in elderly women. $\circled1$ Type L: Not too droopy and large breast $\circled2$ Type 2: A little droopy and small breast $\circled3$ Type 3; Very droopy and wide breast

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.246-252
• /
• 2000

The nonlinearity of a cable-stayed bridge results in the large displacement of main girder due to a long span, the large axial forces reduce the catenary action of cables and the flexural stiffness. Therefore, the static and dynamic behavior of pylon for a cable-stayed bridge plays an important role in determining its safety. This study was performed to find the behavior of pylon of cable-stayed bridge for the first-order analysis considering of axial load only and for the second-order analysis considering of lateral deflection due to axial load. The axial force and moment values of pylon were different from the results of the first-order analysis and second-order analysis according to pylon shape and cross beam stiffness when the pylon was subjected to earthquake and wind loads. In the second-order analysis, comparing the numerical values of the member forces for the dynamic analysis, types 3 and 4 (A type) were relatively more advantageons types than types 1 and 2 (H type). Considering the stability for pylon of cable-stayed bridge (whole structural system), types 3 and 4 (A type) with pre-buckling of girder were proper types than types 1 and 2 (H type) with buckling of pylon.

• 한국식생활문화학회지
• /
• 제38권6호
• /
• pp.402-414
• /
• 2023

This study evaluated the consumers' demands and points of improvement for restaurant meal replacement through importance-performance analysis by the restaurant meal replacement segment market using food involvement. The results were as follows. First, after segmenting the restaurant meal replacement market using food involvement, it was classified into three markets (multiple involvements, exploration-oriented, and product quality-oriented). Second, an analysis of the importance of restaurant meal replacement selection attributes revealed taste, sanitation, quality, freshness, price, saving time, texture, ingredients, preparation process, and quantity to be highly important. An analysis of the differences according to the market type revealed the multiple involvement type to be more important than other groups, considering the restaurant meal replacement selection attribute element. Third, an analysis of the importance-performance analysis of restaurant meal replacement selection attributes revealed that quantity and price as the selection attributes that needed to be improved first in all three markets. In addition, in the multiple involvement type, food additives appeared as a selection attribute requiring priority improvement, revealing the characteristics of a market that cares about diet and health.

• 대한가정학회지
• /
• 제40권2호
• /
• pp.1-13
• /
• 2002

The purpose of this study is to analyze typologic methods in the Family Studies. For this goal, we reviewed literatures related to social research methodology, and analyzed articles in the Family Studies part on the basis of themes and typologic methods. The major resets can be summarized as follow: Typology methods used to clarify complex and subtle family phenomena and distinguish redundant interaction in everyday life. Especially, they can show family system type, communication mode style, leisure activity type, life altitude type, and personality traits type. Typology was made by the methods as follow: the insight, crossing the two single question, intersecting scale's mean or middle point, cluster analysis, and factor analysis. Typology is useful method in the Family Studies, but the accuracy standard needs in the future studies.

• 대한한의학회지
• /
• 제29권1호
• /
• pp.7-14
• /
• 2008

Purpose : The purpose of study was to develop generalized validity evaluation methods and terms for Sasang type diagnostic tests. Methods : A generalized statistical evaluation model for Sasang typology was suggested and generalized validity evaluation indices were proposed with this model. Results : The usefulness of validity evaluations, such as sensitivity and specificity values, were confirmed by the systematic review of the data from previously reported studies. Conclusion :Major obstacles in the multi-facet analysis and systematic review for Sasang type diagnostic tests were discussed with this test validity study.

• 설비공학논문집
• /
• 제8권2호
• /
• pp.288-298
• /
• 1996

The gas-fired absorption refrigeration system to utilize treated sewage is available for environmental protection and energy conservation. Simulation analysis on the double-effect absorption refrigeration cycles with parallel or series flow type has been performed. The working fluid is Lithium Bromide and water solution. The main purpose of this study is evaluating the possibilities of effective utilization of treated sewage as a cooling water for the absorber and condenser. The efficiency of a couple of cycles has been studied and simulation results show that higher coefficient of performance could be obtained for parallel flow type. The other purpose of the present study is to determine the optimum designs and operating conditions based on the operating constraints and the coefficent of performance in the paralledl flow type.