• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.973-977
• /
• 2004

A pneumatic cylinder used to sliding seal which seal the element one to another in relative motion. It is difficult to accuracy control because of adhesion phenomenon. To confirm this phenomenon, it is carried to friction force test and analysis for bellows type rodless cylinder. In the rodless cylinder of this type, friction force test is very important. Through the theoretical analysis of shock absorber obtained the optimal design of bellows type rodless cylinder. As the result of the friction force test, LM Guide type is suitable for work under low friction force.

• 디지털융복합연구
• /
• 제16권8호
• /
• pp.373-380
• /
• 2018

본 연구는 초등학교의 표현활동수업에서의 교수행동유형이 몰입 및 유능감에 미치는 영향을 알아보는데 목적이 있다. 본 연구에서는 B광역시 소재 초등학생을 모집단으로 선정하였다. 연구 설계에 준하여 비확률 표본추출방법 중의 하나인 편의표본추출법을 사용하여 표본을 추출하였다. 총 300부를 배포하여 280부를 회수하였고 응답이 불성실하거나 적합하지 않은 자료를 제외하고 216부를 최종분석에 사용하였다. 자료처리는 Window용 SPSS 통계 Package 22.0 Version을 이용하여 빈도분석, 탐색적 요인분석, 신뢰도 분석, 상관관계 분석 및 다중회귀분석을 실시하였다. 결과는 다음과 같다. 첫째, 교수행동유형의 하위요인인 지시형, 권위형, 민주형, 보상형 모두 몰입에 유의한 것으로 나타났다. 둘째, 교수행동유형의 하위요인인 민주형, 보상형은 유능감에 유의한 것으로 나타났으나, 지시형, 권위형은 유의하지 않은 것으로 나타났다. 셋째, 몰입은 유능감에 유의한 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.635-643
• /
• 2003

Parametric study for the analysis of performance characteristics of a planar -type solid oxide fuel cell(SOFC) using computational flow analysis is conducted. A planar -type SOFC, which is composed by two gas channels (fuel and ai.) and one set of anode-electrolyte-cathode assembly, is modeled as a two -dimensional isothermal case. Results of computational analysis of flow field including distributions of mass fractions in gas channels are used to the performance analysis of the fuel cell. Flow analysis makes it possible to consider current density distributions along the length of the cell in the process of performance analysis of the SOFC. As results of parametric study, it is found that the mole fraction of fuel at the inlet of fuel channel, operating pressure and temperature are closely related to the performance characteristics of SOFC.

• 대한지역사회영양학회지
• /
• 제21권6호
• /
• pp.545-557
• /
• 2016

Objectives: This study was performed to compare the diet quality and diversity according to types of obesity categorized by body mass index and waist circumference among Korean adults aged 19-64 years. Methods: This study used the data of the 5th Korea National Health and Nutrition Examination Survey (KNHANES-V) and included 11,081 study participants. Type of obesity was categorized into 4 groups (Type 1: BMI obesity + abdominal obesity; Type 2: BMI obesity only; Type 3: abdominal obesity only; Type 4: Normal). To compare the diet quality and diversity according to obesity type, ANCOVA (Analysis of covariance) was used with stratification of age groups (19-44 years, 45-64 years). Results: With regard to comparative analysis of diet quality, there were significant differences between diet qualities in energy, protein, thiamin, riboflavin, niacin, phosphorous and iron and type of obesity in the 19-44 age group, while there were significant differences between diet qualities on protein, vitamin C, phosphorous and type of obesity in the 45-64 age group. There was no significant difference between diet diversity score and type of obesity in Korean adults. Conclusions: This study showed that in Korean adults, diet qualities of some nutrients were different among obesity types, while diet diversity was not. These observations should be considered in an effort to improve intake of over-and deficient nutrients and in further studies to evaluate the effects of nutrient quality on obesity.

• 한국의류학회지
• /
• 제25권6호
• /
• pp.1155-1166
• /
• 2001

The purposes of this research were 1) to identify shopping orientation according to customer's personality type, 2) to examine perceived importance of service and satisfaction of service related to customer's personality type, 3) to find the relationships of evaluation of salesperson's service and re-purchase intention in each of customer's personality types. The data were collected via self-administered questionnaires from 434 female formal wear shoppers. and were analyzed by frequency, factor analysis, ANOVA, Chi-square test, and multiple regression analysis. The results of this study were as follows: Shopping orientations varied according to customer's personality type. E type had stronger Hedonic/self-confidence than I type, F type had higher Depending decision making than T type and P type had higher Quick decision making than J type. And service items satisfied the customers with a certain personality type. E type was satisfied with timely and proper A/S, not forcing to purchase and trustful behavior of salesperson more than I Type was. And also with expertise, individualized care, polite attitude, and merchandising promotion. N type was satisfied with individualized care more than S type was. A service evaluation criterion affected the re-purchase intention for a customer with a certain personality type. Customer's convenience in E. I. S, N, T, F, J types had a significant effect on re-purchase intention. And Expertise/ care in E, N, T, J types had a positive effect on re-purchase intention. also Politeness in E, I, S, N, T, J, P types did. But in only E type, Merchandising promotion affected re-purchase intention.

• 지역사회간호학회지
• /
• 제31권2호
• /
• pp.212-221
• /
• 2020

Purpose: This study aims to identify the types of health-related quality of life (QoL) based on the EuroQoL 5 Dimensions among community older people and predict the factors affecting these types. Methods: This study used data from the 2016 Korea Health Panel Survey, whose participants included 3,848 older people. The data were analyzed using the software jamovi 1.2.17 and Mplus 8.2 for latent class analysis. Results: The subgroups of the older people's health-related QoL were identified as three latent classes: General stable type (43.9%), pain-related low type (35.0%), and general low type (21.1%). The types and characteristics of health-related QoL among the latent classes differed. Comparing the difference between the general low type and general stable type, the subjects showed higher probability of belonging to the general stable type when they were men, younger, higher education level, employment, better subjective health, lower BMI and stress level, and no suicidal ideation. A comparison between the general low type and the pain-related low type showed that the subjects were more likely to be classified as the pain-related low type when they were younger, higher education, employment, and better subjective health. Conclusion: The results showed a significant heterogeneity in the types of health-related QoL among community older people, and the predictors for each type were not the same. These findings present basic data for cultivating nursing interventions that enhance health-related QoL.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.109-116
• /
• 2004

Normally easy task of plat in urban architecture is that using underground full of activities for increase building site efficiency. Especially for using underground space for the parking lot. Also utilize underground is more increase for fulfill requirement in modern society considered with environmental friendly architecture. The primary objective of this study is to apply analyzed formal foundation type for selecting the optimum type of parking lots considered with structural stability, economical efficiency, construction efficiency, construction duration. This study aim to on criteria decided through the questionaries for the selection considered with in the scale of second stories parking lots underground, parking volume is 80 and reinforced concrete structure. The bearing capacity is 6～8m and downward from surface, healthy ground bearing capacity is 40 t/m2. This study comparative analysis and discuss economical efficiency, construction efficiency, construction duration based constructivist stability which applied Single foundation, Mat foundation, Drop Mat foundation. The result of this study is as follows: First, the result of economical efficiency is that on the basis of single foundation, Drop Mat foundation is 1.88, Mat foundation 2.04 as a comparative analysis on the basis of total construction cost included material cost, labor coast and machinery cost. Second, the result of construction efficiency order is single foundation, Drop Mat foundation, Mat foundation as a comparative analysis on the based connected characteristics. Third, the result of construction duration is that on the basis of Mat Foundation, Drop Mat foundation is 1.33, single foundation is 1.87 as a comparative analysis Critical Path. Forth, Each foundational type characteristics order through the matrix method is that overall each formal type of foundation contraries at economical efficiency and construction efficiency, construction duration. Also expect contradiction between engineers and owners due to engineer pursuit construction duration and ewer to begin with economical efficiency. Fifth, The selection of suitable foundation formal type needs that based consider project characteristic and field condition as according to above result of a comparative analysis. As a result, a comparative analysis economical efficiency, construction efficiency, construction duration of Mat foundation, Drop Mat foundation, single foundation with 3Bay reinforced structure underground parking lots on the healthy ground.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1886-1896
• /
• 2004

Various types of buckets are used as unloading facilities for raw material at unloading wharfs. Scissors type buckets, among them, has been being used widely because of their short cycle time and structural simplicity. However, the scooping capacity, especially for hardened remainder ore, of some buckets are unsatisfactory because of poor design concept of the buckets. In this study, the effects of the design parameters on the scooping performance of the buckets are investigated under kinematic and dynamic analysis. Further, the schemes and design guidelines for designing new scissors type buckets are also presented to improve ore scooping capacity for hardened remainder ore.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.8-15
• /
• 1995

This analytical study was carried out to make quality and productivity up in designing the frame-type furniture with semi-rigid joint by understanding the mechanical and structural behavior of the joint and by evaluating the validity of application of the time-saving Finite Element Method to its structural analysis. Slope deflection equation for rigid joint was modified to describe the moment-rotation behavior of semi-rigid joint and the joint stiffness factor(Z) could be calculated to lessen the experimental expense. It was proved that Finite Element Analysis with imaginary elements having equivalent MOE to the semi-rigid joint could be the alternative method for the structural analysis of the frame-type furniture, comparing the internal rotation of the 2-dimensional beam-to-column model with two-pin(wooden dowel) from the finite element method with other available theoretical and experimental rotation value.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.185-190
• /
• 2011

The important use of the desuperheater(multi spray type) changes the superheated steam into the saturated steam. It is more efficient and suitable for using the process. Also, it is more convenient and stable regarding the process temperature control. In this study, transient and quasi-static analysis were done for the evaluation of structural integrity of the multi spray type desuperheater of the power plant. Computational analysis was used to calculate the thermal stress, and the vibration test was done to evaluate the structural stability. This paper is verified by analysis that water spray nozzle(${\phi}=28mm$) shows the best ability. The results show that structural stability of the desuperheater under the real operating condition was proven.