• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.35
• /
• pp.147-178
• /
• 2007

This study clarified a study of relationship of strategic alliance structure factor, partner selection criteria and performance awareness on the container liners alliance. In order to obtain such objective of study existing literature variables suitable to the container liner were perused and extracted. Research models for research development and three study hypothesis were set out and scope of investigation and samples were chosen. The research hypothesis are followings. H1: The factors of strategic alliance motivation influence the performance awareness. H2: The strategic alliance structure factors influence the performance awareness. H3: The factors of partner selection criteria influence the performance awareness. In the result of the empirical study, the hypothesis 1, hypothesis 2 were supported completely and hypothesis 3 was partially supported.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.04a
• /
• pp.371-378
• /
• 2001

To enhance seismic performance of a structure ATC-40 and FEMA-273 propose technical strategies such as increasing strength, altering stiffness, and reducing demand by employing base isolation and energy dissipation devices. Specifically the energy dissipation devices directly increase the ability of the structure to dampen earthquake response. However nonlinear dynamic time history analysis of a structure with energy dissipation devices is complicated and time consuming. In this study a simple and straightforward procedure is developed using effective damping ratio to obtain the required amount of viscoelastic dampers in order to meet given performance objectives. Parametric study has been performed for the period of the structure, yield strength, and the stiffness after the first yield. According to the analysis results, earthquake demand and required damping ratio were reduced by installing viscoelastic dampers. The results also show that with the addition of the supplemental damping evaluted by the proposed method the performance of the model structures are well restrained within the target point.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.293-308
• /
• 2020

This study aims to investigate the direct relationship between ownership structure, earnings manipulation, and organizational performance, and then examine the mediating effect of earnings manipulation in the relationship between ownership structure and organizational performance. This study collected and analyzed secondary data published in financial reports related to all insurance organizations listed in the Jordanian market during the study period (from 2009 until 2018). A panel data analysis was conducted, giving a total of 200 observations. The findings of this study concluded that ownership concentration, foreign ownership, and organization size affect organizational performance proxied by ROA, ROE, and EPS, more specifically, ownership concentration and organization size have a positive effect, whereas foreign ownership has a negative effect. At the same time, board of director ownership, organizational ownership, and CEO compensation did not affect organizational performance. Next, the board of director ownership, ownership concentration, foreign ownership, and CEO compensation affect earnings manipulation separately. In addition, earnings manipulation positively affects organizational performance proxied by ROA, ROE and EPS. This means that the higher the earnings manipulation is, the higher the organizational performance is. Finally, earnings manipulation mediates the relationship between ownership concentration and foreign ownership of ownership structure, and organizational performance.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.195-201
• /
• 2018

This study is attempted to demonstrate the structure of the influencing factors on the performance of services of knowledge based service firms. In the model presented, the structure is that service performance in knowledge-based services are affected by the strategic utilization of knowledge resources and service orientation factors of the service organization. And the service performance are also affected in which the systemization of service processes and customer satisfaction play a mediating role. As an analysis result of examining 148 practitioners engaged in the knowledge service industry, it is necessary to increase the satisfaction of external customers in order to improve service performance in a knowledge-based service organizations. This can be achieved by increasing the satisfaction of internal customers. In addition, for this structure to be successful, the service production process to be provided to the customer must be enhanced. The service production process has been found to be an important factor influencing the internal customer satisfaction and service delivery process, especially in the use of knowledge resource, and customer oriented service among service orientation factors.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.2
• /
• pp.129-135
• /
• 2018

Following a 5.8 magnitude earthquake on September 12, 2016 in Gyeongju Province, a magnitude 5.4 earthquake occurred in the northern region of Pohang City on November 15, 2017 in South Korea. Only 7.9 % of the building structures are earthquake-resistant, according to the recent survey conducted by the government agencies in October 2017. In this paper, the linear analysis seismic performance evaluation procedure of the existing school structures presented in the revised methodology(Seismic Performance Evaluation Procedure and Rehabilitation Manual for School Facilities) was introduced. In this paper, the linear analysis evaluation procedure presented in the revised methodology was introduced and the seismic performance index of the example structure was evaluated using the linear analysis evaluation procedure. The seismic retrofit was verified by the linear and nonlinear dynamic analyses using Perform 3D. The analysis results show that the dissipated inelastic energy is concentrated on the retrofitted shear wall and the maximum inter-story drift of the stadium model structure with damping system satisfies the requirement of the current code.

• International Journal of Contents
• /
• v.1 no.2
• /
• pp.13-17
• /
• 2005

Base Station Controller which belongs to IMT-2000(International Mobile Telecommunication - 2000) network has several types of structure for efficient control protocol. This difference of structure occurs two different protocols for call handling. Recently the need of IMT-2000 is highly increasing, so it is important to analyze the performance of processors and IPC(Inter-Processor Communication) module with structure of BSC and protocol difference. This paper presents the performance comparison of different types of BSC in view of processor utilization, waiting time, queue length and QoS(Quality of Service) through the simulation model.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.7
• /
• pp.20-29
• /
• 1998

As the packing density of ICs in recent submicron IC design increases, interconnects gain importance. Because interconnects directly affect on two major components of circuit performance, power dissipation and operating speed, circuit engineers are concerned with the optimal design of interconnects and the aid tool to design them. When circuit models of interconnects are given (including geometry and material information), the analysis process for the given structure is not an easy task, but conversely, it is much more difficult to design an interconnect structure with given circuit characteristics. This paper focuses on the latter process that has not been foucsed on much till now due to the complexity of the problem, and prsents a design aid tool(DATOIS) to synthesize interconnects. this tool stroes the circuit performance parameters for normalized interconnect geometries, and has two oeprational modes:analysis mode and synthesis mode. In the analysis mode, circuit performance parameters are obtained by searching the internal database for a given geometry and interpolates results if necessary . In thesynthesis mode, when a given circuit performance parameter satisfies a set of geometry condition in the database, those geometry structures are printed out.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this paper, a semi-infinite array analysis method is proposed to analyze the defects that may occur during the fabrication of the frequency selective radome. In the analysis of N×N finite array structure using 3D analysis software, much analysis time and memory are required, whereas the semi-infinite array structure analysis proposed in this paper can predict relatively accurate electromagnetic performance while reducing the analysis time. In comparison with the results of the periodic simulation, the simulation of the semi-infinite array structure confirmed the error within ±3%. To verify the results of the simulation, the results were compared with the measured results, and the same tendency at the point of performance change and similar performance degradation at the band of interest were investigated. Using the proposed semi infinite array structure analysis, it is confirmed that the analysis of defects in the electromagnetic periodic structure is possible.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.299-304
• /
• 2008

Dynamic characteristics of smart hull structure are investigated and active vibration control performance is evaluated. Dynamic model of smart hull structure with surface bonded Macro-fiber Composite (MFC) actuators is established by analytical method. Equations of motion of the host hull structure are derived based on Donnell-Mushtari equilibrium equations for a thin cylindrical shell. A general model for the interaction between hull structure and MFC actuator is included in the dynamic model. Modal analysis is then conducted and mode shapes and corresponding natural frequencies are investigated. After constructing of the optimal control algorithm, active vibration control performance of the proposed system is evaluated. It has been shown that structural vibration can be reduced effectively with proper control input.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.832-840
• /
• 2008

Dynamic characteristics of smart hull structure are investigated and active vibration control performance is evaluated. Dynamic model of smart hull structure with surface bonded macro-fiber composite(MFC) actuators is established by analytical method. Equations of motion of the host hull structure are derived based on Donnell-Mushtari equilibrium equations for a thin cylindrical shell. A general model for the interaction between hull structure and MFC actuator is included in the dynamic model. Modal analysis is then conducted and mode shapes and corresponding natural frequencies are investigated. After constructing of the optimal control algorithm, active vibration control performance of the proposed system is evaluated. It has been shown that structural vibration can be reduced effectively with proper control input.