• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1271-1280
• /
• 2000

A sensor placement technique to identify structural parameter was developed. Experimental results must be acquired to identify unknown dynamic characteristics of a targeting structure for the comparison between analytical model and real structure. If the experimental environment was not equipped itself properly, it can be happened that some valuable information are distorted or ill-condition can be occurred. In this work the index to determine exciting points was derived from the criterion of maximizing parameter sensitivity matrix and that to choose measurement points was from that of preserving the invariant of sensitivity matrix. This idea was applied to a compressor hull structure to verify its performance. The result shows that the selection of measurement and excitation points using suggested criteria improve the ill-conditioning problem of inverse type problems such , as model updating.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.215-221
• /
• 2004

Large machine and structure can not be normally treated as lumped parameter system. Such machine or structure must be broken down to individual beams or panels the motion of which must be analysed before an absorber system can be designed for each element. The absorber may be a lumped parameter system or a continuous system. One of the most common elements in a machine or structure is the cantilever, and in this paper is considered the design of a continuous parameter absorber to reduce the transverse vibrations of a beam. So this paper describes the method to obtain the accurate information about combined continuous beam system with DVA. This information is obtained from the combined system's receptance. and this paper shows the convenience and useful informations when design the dynamic vibration absorber with the combined system's receptance.

• 소음진동
• /
• 제4권2호
• /
• pp.177-185
• /
• 1994

In this study, the effect of parameter errors on the closed-loop behavior of flexible structure is analyzed for IMSC(Independent Modal Space Control) with PPF(Positive Position Feedback). If the control force designed on the basis of structure model with the parameter errors is applied to control the actual system, the closed-loop performance of the actural system will be degraded depending on the degree of the errors. An asymptotic stability condition has been derived, using Lyapunov approach, which is independent of the dynamic characteristics of the structure being controlled. The extent of deviation of the closed-loop performance from the designed one is also derived and evaluated using operator techniques. It has been found that the extent of the deviation is proportational to the magnitude of the parameter errors, and that the proportional coefficient depends on the control algorithm.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.163-175
• /
• 1996

This paper invetigates estimation methods of mapping parameters in object-oriented coding. In this paper, we propose a fast parameter estimation method with its performance similar to that of the conventional methods. We employ hierarchical structure in difference images to redcue the computational complexity and also combine conventional six- and eight-mapping parameter estimation methods to compensate for the performance degradation caused by employment of hierarchical structure. Computer simulation shows that the proposed mehtod gives results similar to conventional methods with greatly reduced computational complexity.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.325-344
• /
• 2017

The present paper investigates the propagation of Love-type wave in a composite structure comprised of imperfectly bonded piezoelectric layer with lower fiber-reinforced half-space with rectangular shaped irregularity at the common interface. Closed-form expression of phase velocity of Love-type wave propagating in the composite structure has been deduced analytically for electrically open and short conditions. Some special cases of the problem have also been studied. It has been found that the obtained results are in well-agreement to the Classical Love wave equation. Significant effects of various parameters viz. irregularity parameter, flexibility imperfectness parameter and viscoelastic imperfectness parameter associated with complex common interface, dielectric constant and piezoelectric coefficient on phase velocity of Love-type wave has been reported. Numerical computations and graphical illustrations have been carried out to demonstrate the deduced results for various cases. Moreover, comparative study has been performed to unravel the effects of the presence of reinforcement and piezoelectricity in the composite structure and also to analyze the existence of irregularity and imperfectness at the common interface of composite structure in context of the present problem which serves as a salient feature of the present study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1172-1174
• /
• 2002

An adaptive fuzzy P + ID controller for variable speed operation of BLDC motor drives is presented in this paper. Generally, a conventional PID controller is most widely used in industry due to its simple control structure and ease of design. However, the PID controller suffers from the electrical machine parameter variations and disturbances. To improve the tracking performance for parameter and load variations, the controller proposed in this paper is constructed by using an adaptive fuzzy logic controller in place of the proportional term in a conventional PID controller. For implementing this controller, only one additional parameter has to be adjusted in comparison with the PID controller. An adaptive fuzzy controller applied to proportional term to achieve robustness against parameter variations has simple structure and computational simplicity. The controller based on optimal fuzzy logic controller has an self-tuning characteristics with clustering. Computer simulation results show the usefulness of the proposed controller.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.833-840
• /
• 2003

The stability of structure, effectiveness of design and construction are very important factors in soil-structure design. The design-parameter is based on the test through laboratory-test and field-test. There are two ways to obtain the design-parameter. One is to through test, and the other is through relative documents and references. Recently, statistics has been used to get reliable data. In this study, Kriging method as Geostatistics and the theory of Bayesian's inference are used and the design-parameters are obtained. As the result of this study to the design-parameter is reliable and information about soil condition and soil properties in design and construction is easily found.

• 전자공학회논문지S
• /
• 제34S권1호
• /
• pp.43-53
• /
• 1997

A robust stability condition for linear systems with time delay in all variables and parameter uncertainties in all system matrices is derived. Robust performance condition that accounts for robust model-matching of closed loop system and disturbance rejection is also derived. Using the robust performance condition, robust $H^{\infty}$ controller and .mu.(sgructured singular value) controller with two-degree-of-freedom(2DOF) are designed. The controller structure is considered for $H^{\infty}$ controller, while uncertainity structure is considered for .mu. controller. Using the proposed method, $H^{\infty}$ and .mu. controllers for underwater vehicle with time delay and parameter variations are designed. Simulations of a design example with hydrodynamic parameter variations and disturbance are presented to demonstrate the achievement of good robust performance.ce.

• 정보처리학회논문지B
• /
• 제11B권6호
• /
• pp.653-660
• /
• 2004

객체지향 분석-합성 부호화는 일련의 영상들을 여러 개의 동 객체로 분할한 후 각 객체의 움직임을 추정하고 보상한다. 그것은 각 객체에 있는 움직임 정보를 추정하기 위해 변환 파라미터 기법을 적용하는데 이때 변환 파라미터 기법은 그레디언트 연산자를 사용하기 때문에 매우 복잡한 계산이 요구된다. 본 논문의 목적은 객체지향 분석-합성 부호화에서 계층적 구조를 사용한 효율적인 변환파라미터 기법을 개발하는 것이다. 이러한 목표를 달성하기 위해 본 논문은 계층적 구조를 사용한 하이브리드 변환파라미터 추정 방법과 적응형 변환 파라미터 방법의 두 가지 알고리듬을 제안한다. 전자는 파라미터 검증 방법을 사용하는데 원 영상을 1/4로 축소한 저해상도 영상에서 파라미터 검증 처리 방법에 의해 6-파라미터 또는 8-파라미터로 추정한다. 후자는 동일한 계층적 방법을 적용한 다음 변환 파라미터를 적응적으로 추정하기 위해 temporal co-occurrence 행렬에 기반 한 움직임 량을 측정하는 움직임 판단기준을 사용한다. 이러한 방법은 고속이며, 병렬처리 기법을 사용할 경우 쉽게 하드웨어로 구현할 수 있는 이점이 있다. 이론 분석 및 모의시험 결과 제안한 방법이 기존 방법에 비해 약 1/4 정도로 월등한 계산량 감축을 얻을 수 있었으며, 아울러 제안한 방법들에 의해 복원된 신호대 잡음비는 6-파라미터와 8-파라미터 추정 방법에 의해 복원된 결과들 사이에 있음을 보여 준다.

• 한국멀티미디어학회논문지
• /
• 제6권1호
• /
• pp.136-147
• /
• 2003

주어진 문제에 대하여 최적의 성능을 가지는 신경회로망을 얻기 위해서는 학습을 통한 매개변수의 최적화 (parameter optimization)와 모델 선택을 통한 구조 최적화(structure optimization )의 통합적인 과정이 필요하다. 본 논문에서는, 각 세부 방법들의 특성을 고려하여, 공통의 특성을 갖는 방법들을 결합함으로써 효율적이면서도 일반화 성능을 높이는 총체적인 신경회로망 최적화 방법을 제안한다. 먼저 다양한 오차 함수를 사용할 수 있는 자연 기울기 강하 학습에 적응적 정규화 방법을 도입함으로써 가중치 매개변수(weight parameter)들을 최적화한다. 그리고 이렇게 최적화된 매개변수(parameter)들에 자연 프루닝(natural pruning)을 적용하여 불필요한 요소들을 제저하여 최적화 된 구조를 생성한다. 반복적인 과정에 의하여 후보 모델들을 구성하고 베이시안 정보 기준(Bayesian Information Criterion: BIC )을 이 용하여 최적의 모델을 평가하여 선택하는 방법을 제안하였다. 벤치마크 데이터에 대한 실험을 통하여 제안하는 방법의 구조 최적화 능력과 일반화 성능의 우수성을 보였다.