• 한국해안·해양공학회논문집
• /
• 제22권5호
• /
• pp.326-332
• /
• 2010

해수 임펠러샤프트의 각종 하중에 의한 파단과 이를 개선하기위한 재설계는 정적, 동적 해석을 통한 원인분석과 유한요소법을 이용하여 효과적으로 수행할 수 있다. 본 논문에서는 전형적인 임펠러 샤프트의 파손에 대한 원인 분석을 수행하고 관련된 재설계기법을 제시하였다. 일차적으로 정적구조해석을 수행하였고 다음으로 구조물의 외력과의 공진문제를 포함한 동적해석을 수행하였다. 구조해석은 ANSYS코드를 사용하였으며, 결과적으로 파단원인을 찾아 분석하였다. 주된 파단원인은 과도한 굽힘모멘트의 발생과 응력집중, 구조물의 외력과의 공진에 의한 것으로 분석되었다. 해수 임펠러샤프트의 파단과 관련된 재설계기법의 이론적 배경을 정립하였으며, 재설계기법의 적용성과 정적, 동적 샤프트 재설계에 대한 유용성을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제16권1호
• /
• pp.101-114
• /
• 2003

A base isolation system is proposed for earthquake protection of structures. The system incorporates spherical supports for the base, a specially designed spring-cam system to keep the base rigidly supported under normal condition and to allow it to move for the duration of the earthquake under the constraint of a spring with optimized non-linear characteristics. A single-story model is constructed to investigate the feasibility of the concept. Numerical simulations of the system as well as experimental results show that 95% reduction of the transmitted force to the structure can be achieved. To demonstrate the effectiveness of this isolation mechanism, the maximum dynamic bending stress developed at predetermined critical points within the frame of the structure is measured. Significant reduction of the dynamic stresses is obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.110-118
• /
• 2008

This thesis introduces a study conducted by ANSYS, Finite Element Analysis program, on dynamic behavior by thickness of a chord and a brace of a jacket typed marine structure. As load condition to work on offshore structures is getting much more various, it becomes more important to design the structures and operate them. In addition, stability is also required. As the result of this study, it was proved that wind and wave load gives more affection on frequency than on added mass in the Modal Analysis. Also, the chord and brace affect stiffness more than diagonal brace according to sensitivity analysis.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.335-340
• /
• 2002

In this study procedure for finding out additional viscous damping required to meet a performance target of an asymmetric nonlinear structure is developed based on the design concept of Pauly. The behavior of an asymmetric nonlinear structure after yielding is investigated. Finally the required amount of equivalent damping is obtained using the direct-displacement-based design method without carrying out time-consuming nonlinear dynamic time history analysis.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권4호
• /
• pp.217-222
• /
• 2010

Since 1980's, optimum design techniques for ship structural design have been developed to the preliminary design which aims at minimum weight or minimum cost design of mid-ship section based on analytic structural analysis. But the optimum structural design researches about the application for the detail design of local structure based on FEA have been still insufficient. This paper presents optimization technique for the detail design of a racing motor boat. To improve the performance and reduce the damage of a real existing racing boat, direct structural analyses; static and non-linear transient dynamic analyses, were carried out to check the constraints of minimum weight design. As a result, it is shown that the optimum structural design of a racing boat has to be focused on reducing impulse response from pitching motion than static response because the dynamic effect is more dominant. Optimum design algorithm based on nonlinear finite element analysis for a racing motor boat was developed and coded to ANSYS, and its applicability for actual structural design was verifed.

• 한국지반환경공학회 논문집
• /
• 제19권10호
• /
• pp.35-41
• /
• 2018

구조물을 지지하는 말뚝기초에 대한 내진설계 시 안정을 위해 지반-기초-구조물의 동적 상호작용이 반드시 고려되어야 한다. 말뚝기초의 내진설계에 정적 및 반복하중 조건에서 제안된 p-y 곡선이 이용되고 있다. 이 p-y 곡선은 지진과 같은 동하중 조건에서 지반-기초-구조물의 상호작용이 고려되지 않았기 때문에 내진설계에 적용하기 어렵다. 이에 지반-기초-구조물의 동적 상호작용을 고려한 동적 p-y 곡선에 관한 연구가 수행되었으나 공통된 조건으로 말뚝 캡이 지표면 위에 노출되어 있고, 상부구조물은 단순 중량으로 말뚝 캡에 추가하여 동적 p-y 곡선을 확인하였다. 그러나 해양구조물인 경우를 제외한 보편적인 무리말뚝의 경우 지반에 근입하여 시공됨에 따라 말뚝 캡의 근입 여부가 말뚝의 동적 p-y 곡선에 영향을 미칠 것으로 보인다. 이에 본 연구에서는 말뚝 캡의 지반 근입에 따른 무리말뚝의 동적거동을 확인하기 위해 진동대 모형실험을 수행하였다. 그 결과 무리말뚝의 말뚝 캡이 지반에 근입된 경우와 근입되지 않은 경우의 동적거동은 다르게 나타났다.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1949-1957
• /
• 2000

All the loads in the real world act dynamically on structures. Since dynamic loads are extremely difficult to handle in analysis and design, static loads are utilized with dynamic factors. The dyna mic factors are generally determined based on experiences. Therefore, the static loads can cause problems in precise analysis and design. An analytical method based on modal analysis has been proposed for the transformation of dynamic loads into equivalent static load sets. Equivalent static load sets are calculated to generate an identical displacement field in a structure with that from dynamic loads at a certain time. The process is derived and evaluated mathematically. The method is verified through numerical tests. Various characteristics are identified to match the dynamic and the static behaviors. For example, the opposite direction of a dynamic load should be considered due to the vibration response. A dynamic bad is transformed to multiple equivalent static loads according to the number of the critical times. The places of the equivalent static load can be different from those of the dynamic load. An optimization method is defined to use the equivalent static loads. The developed optimization process has the same effect as the dynamic optimization which uses the dynamic loads directly. Standard examples are solved and the results are discussed

• 소음진동
• /
• 제8권2호
• /
• pp.361-368
• /
• 1998

Complex and large lattice type structures are frequently used in design of bridge, tower, crane and aerospace structures. In general, in order to analyze these structures we have used the finite element method(FEM). This method is the most widely used and powerful tool for structural analysis. However, it is necessary to use a large amount of computer memory and computation time because the FEM resuires many degrees of freedom for solving dynamic problems exactly for these complex and large structures. For overcoming this problem, the authors developed the transfer stiffness coefficient method(TSCM). This method is based on the concept of the transfer of the nodal dynamic stiffness coefficient which is related to force and displacement vector at each node. In this paper, the authors formulate vibration analysis algorithm for a complex and large lattice type structure using the transfer of the nodal dynamic stiffness coefficient. And we confirmed the validity of TSCM through numerical computational and experimental results for a lattice type structure.

• 유통과학연구
• /
• 제18권3호
• /
• pp.25-36
• /
• 2020

Purpose: Based on previous researches on social factors of digital item purchase in digital contents distribution platforms such as SNS, we aim to develop the integrated model that accounts for the dynamic and interactive relationship between social structure indicators and digital item purchase. Research design, data and methodology: A PVAR model was used to capture endogenous and dynamic relationships between digital item purchase and network indicators. Results: We find that there exist considerable endogenous and dynamic relationships between digital item purchase and network structure variables. Not only lagged in-degree and out-degree but also in-closeness and out-closeness centrality have significant and positive impacts on digital item purchase. Lagged clustering has a significant and negative effect on digital item purchase. Lagged purchase has a significant and positive impact just on the present in-closeness and out-closeness centrality; but there is no significant effect of lagged purchase on the other two degree variables and clustering coefficient. We also find that both closeness centralities have much higher carryover effect on digital item purchase and that the elasticity of both closeness centralities on the purchase of digital items is even higher than that of other network structure variables. Conclusions: In-closeness and out-closeness are the most influential factors among social structure variables of this study on digital item purchase.

• Steel and Composite Structures
• /
• 제31권6호
• /
• pp.617-628
• /
• 2019

As an extremely destructive accident, progressive collapse is defined as the spread of an initial local failure from element to element, resulting eventually in the collapse of an entire structure or disproportionately large of it. To prevent the occurrence of it and evaluate the ability of structure resisting progressive collapse, the nonlinear static procedure is usually adopted in the whole structure design process, which considered dynamic effect by utilizing Dynamic Increase Factor (DIF). In current researches, the determining of DIF is performed in full-rigid frame, however, the performance of beam-column connection in the majority of existing frame structures is not full-rigid. In this study, based on the component method proposed by EC3 guideline, the expression of extended endplate connection performance is further derived, and the connection performance is taken into consideration when evaluated the performance of structure resisting progressive collapse by applying the revised plastic P-M hinge. The DIF for structures with extended endplate beam-column connection have been determined and compared with the DIF permitted in current GSA guideline, the necessity of considering connection stiffness in determining the DIF have been proved.