• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.131-138
• /
• 2021

The purpose of this study is to derive the implications of Grit research by analyzing domestic research trends on Grit, which is a non-cognitive subject that has been actively researched in Korea recently in order to grasp the achievements so far and to seek directions for research. The analysis method was analyzed according to the pre-set criteria (annual publication status, research subject, research method, research topic, etc.) which were focusing on KCI listed and KCI excellent Grit papers among domestic academic papers of 'RISS'. As a result of the study, from 2013 to 2019, a total of 203 papers were searched and published in 92 domestic journals. Beside that, the subjects of the study, 88 cases (43.35%) were college students and 180 cases (88.67%) were quantitative studies as the research method. So, the most common research method was quantitative research. As a quantitative research method, the structural relationship between Grit and other variables, mediating effect, difference verification, and moderation effect verification were shown in order, and qualitative research has been conducted since 2017 to develop the concept of Grit, the Grit scale, and the corresponding factor structure and validity. This study will contribute to the educational field by presenting the implications of research on the development of Grit in Korea.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.181-188
• /
• 2021

This study was performed to examine the strategy method for the sustainable stability and effectiveness of small and medium hospital, where the relationship between perceptual satisfaction and expectation factors for special hospital was analyzed. The structural questionnaire was given to the residents of Busan and Gyungnam over the age of 20 and the square contingency and the logistical regression were employed for the analysis of the results. First, the respondent with 68.0% has realized the hospital claiming to be characterization as the special hospital and the Ministry of Health and Welfare designated hospital was identified to the respondent of 21.3%. Second, perceptual satisfaction with expectation level was satisfied to the most visitor in case of visiting special hospitals with subjective perception and was confirmed to the intention of revisiting consistently. Third, for the perceptual satisfaction of visiting with expectation level, the safety and the quality of treatment affected significantly the cause-and-effect. The result has provided the useful information with the establishment of a strategy for the long-term and continued effect through the perceptual satisfaction and the emotional attachment.

• Conservation Science in Museum
• /
• v.24
• /
• pp.55-74
• /
• 2020

The Sacred Bell of Great King Seongdeok is required digital precision recording of conservation conditions because of corrosion and partial abrasion of its patterns and inscriptions. Therefore, this study performed digital documentation of the bell using four types of scanning and unmanned aerial vehicle (UAV) photogrammetry technologies, and performed the various shape analyses through image processing. The modeling results of terrestrial laser scanning and UAV photogrammetry were merged and utilized as basic material for monitoring earthquake-induced structural deformation because these techniques can construct mutual spatial relationships between the bell and its tower. Additionally, precision scanning at a resolution four to nine times higher than that of the previous study provided highly valuable information, making it possible to visualize the patterns and inscriptions of the bell. Moreover, they are well-suited as basic data for identifying surface conservation conditions. To actively apply three-dimensional scanning results to the conservation of the original bell, the time and position of any changes in shape need to be established by further scans in the short-term. If no change in shape is detected by short-term monitoring, the monitoring should continue in medium- and long-term intervals.

• Journal of Plant Biotechnology
• /
• v.48 no.1
• /
• pp.18-25
• /
• 2021

Solanum demissum is one of the wild Solanum species originating from Mexico. It has wildly been used for potato breeding due to its resistance to Phytophthora infestans. S. demissum has an EBN value of four, which is same as that of S. tuberosum, so that it is directly crossable for breeding purposes with the cultivated tetraploid potato (S. tuberosum). In this study, the chloroplast genome sequence of S. demissum obtained by next-generation sequencing technology was described and compared with those of seven other Solanum species to develop S. demissum-specific markers. Thetotal sequence length of the chloroplast genome is 155,558 bp, and its structural organization is similar to those of other Solanum species. Phylogenetic analysis with ten other Solanaceae species revealed that S. demissum is most closely grouped with S. hougasii and S. stoloniferum followed by S. berthaultii and S. tuberosum. Additional comparison of the chloroplast genome sequence with those of seven other Solanum species revealed two InDels specific to S. demissum. Based on these InDels, two PCR-based markers for discriminating S. demissum from other Solanum species were developed. The results obtained in this study will provide an opportunity to investigate more detailed evolutionary and breeding aspects in Solanum species.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.41-50
• /
• 2020

Since cracks in concrete structures expedite corrosion of reinforced concrete over a long period of time, regular on-site inspections are essential to ensure structural usability and prevent degradation. Most of the safety inspections of facilities rely on visual inspection with naked eye, so cost and time consuming are severe, and the reliability of results differs depending on the inspector. In this study, a portable measuring device that can be used for safety diagnosis and maintenance was developed as a device that measures the width and length of concrete cracks through image analysis of cracks photographed with a camera. This device captures the cracks found within a close distance (3 m), and accurately calculates the unit pixel size by laser distance measurement, and automatically calculates the crack length and width with the image processing algorithm developed in this study. In measurement results using the crack image applied to the experiment, the measurement of the length of a 0.3 mm crack within a distance of 3 m was possible with a range of about 10% error. The crack width showed a tendency to be overestimated by detecting surrounding pixels due to vibration and blurring effect during the binarization process, but it could be effectively corrected by applying the crack width reduction function.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.94-100
• /
• 2021

To improve the productivity of cargo containment construction for a membrane LNG carrier, it is important to shorten the installation period and process of the scaffolding system, which is a construction workbench of a cargo containment for a membrane LNG carrier. As an effective method, opinions are being gathered to enlarge the lifting unit from the existing two stages to eight stages. On the other hand, the stresses around the pin and hole will increase significantly because of the increase in lifting load according to the large size of the module. The purpose of this study was to establish a new large module-lifting plan by introducing TRIZ to solve these problems. This study adopted a method to utilize 40 inventive principles, which is one of the various problem-solving tools of TRIZ. First, technical contradictions were derived, the engineering parameters were selected. Second, efficient inventive principles were selected to overcome the technical contradictions using a contradiction matrix. Finally, the general and specific solutions were derived through the selected inventive principle, and structural analysis confirmed that the stress generated in the structure was low. The utility of TRIZ was confirmed by the successful lifting of large modules using the established lifting method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.556-561
• /
• 2020

The aging and declining agricultural population in the modern society requires improvement of the agricultural environment and is one of the representative problems. And since most of the work systems always require a transport work, the ratio of labor consumed in the transport work is very high. Accordingly, many types of transport vehicles are being developed and sold, and in the early days, most of them are powered transport vehicles using fossil fuels. However, it is paying attention to next-generation eco-friendly energy such as hydrogen, fuel cells, solar power, and bio due to the strengthening of international environmental regulations such as global warming and the Convention on Climate Change and the depletion of fossil fuels. Therefore, in this study, the ultimate goal is to develop an eco-friendly, easy-to-operate, safe agricultural electric vehicle that replaces fossil fuels. It was designed with a focus on controlling a wide range of vehicle speeds and securing stability of electric agricultural vehicles. Considering the performance and design, it is composed of a frame, a driving part, a steering part, and a controller system, and we are going to review and manufacture each part. It is believed that the manufactured electric vehicle for agriculture can be easily and conveniently operated in an agricultural society where young manpower is scarce, and can be helpful to the agricultural society through high efficiency.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.24-31
• /
• 2021

We report structural, mechanical, and thermal properties of diecast ADC12 aluminum alloys characterized using synchrotron X-ray diffraction (XRD), scanning electron microscopy, energy dispersive X-ray (EDX) analysis, thermal conductivity (λ), Vickers hardness (Hv), and stress-strain measurements. We also studied the effect of post-annealing performed in a vacuum atmosphere on the mechanical properties of diecast ADC12 alloys. EDX and XRD results revealed that Al2Cu and AlCu3 grains are formed, well dispersed in Al base and highly crystalline. Ultimate tensile strength (UTS) of 307.9 ± 9.1 MPa and elongation of 2.98 ± 0.62 % were estimated. λ was 129.3 ± 0.27 W/m·K and Hv was approximately 130. Both values were significantly higher than the reported values. At annealing temperatures ranging from 25 to 200℃, UTS and Hv values remained constant, while as the annealing temperature increased to 500℃, these values gradually decreased. This is because stabilization of the microstructure improves toughness and ductility.

• Journal of Digital Convergence
• /
• v.19 no.3
• /
• pp.1-12
• /
• 2021

This study aims to verify the mediating effect of social support in the relationship between online social relations service utilization(PC, mobile) and life satisfaction for middle-aged and Older Adults. For this purpose, the '2017 Digital Devide Survey' data collected by the National Information Society Agency was used, and among 2,300 middle-aged and Older Adults aged 55 or older, 1,488 people using the Internet were selected as the final analysis target. Then, using the structural equation, the mediating effect of social support was verified in the between online social relations service utilization and life satisfaction. As a result, it was verified that higher levels of mobile-based social relations service utilization have a positive effect on social support and life satisfaction. Also, it was confirmed that social support has a mediating effect in the relationship between the utilization of mobile-based social relations service and life satisfaction. However, the utilization of PC-based social relations services did not show to affect social support and life satisfaction. Therefore, the results of this study can be used as basic data for practical measures to increase the connection between mobile-based social relationship service education and social support promotion education for middle-aged and Older Adults. In addition, the study is meaningful in that it overcomes the limitations of measuring the use of online social relations services as one, and selects tools that are practically effective by dividing them into mobile and PC.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.229-243
• /
• 2021

As systematic information protection and management is recognized as an organization's core value, organizations are pursuing a shift from an individual-centered information management method to an organization-oriented information management method. The Enterprise content management system(ECMS) is a solution that supports document security and information sharing by insiders and is being introduced by many organizations due to recent technological developments. The purpose of this study is to present a method of improving performance through continuous use of the ECMS from the user's point of view and also suggest a method to improve the intention of continuous use through the expansion of the technology acceptance model. This study surveyed the employees of organizations that adopted the ECMS and verified the research hypothesis derived from previous studies through structural equation modeling. As a result of the analysis, usefulness, and ease of use affected on the intention of continuous use of the ECMS, and the knowledge sharing culture and the ECMS quality factors affected the technology acceptance model factors. The results of this study have academic and practical significance in terms of suggesting a plan to increase the usability of the ECMS from the user's point of view.