• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.69-75
• /
• 2021

Fuel economy has always been a major issue for the automotive industry due to environmental concerns. In particular, it is known that only 5-20% of the energy generated in a car that mainly uses an internal combustion engine is converted to increase fuel efficiency, many methods have been proposed. Among these methods, weight reduction is most commonly used because it is the simplest and cheapest. Weight is always the main reason for energy consumption, therefore, reducing weight is the best way to increase fuel efficiency while simultaneously saving on material costs. To reduce the weight of a compressor, material substitution is used. However, aluminum (a lighter metal substitute) is more fragile than steel, therefore, structural stability must be verified through testing. In this paper, we performed a 3D analysis to investigate whether aluminum can be used without compromising structural stability. Our investigation included static analysis and thermal analysis. As a result, we found that an aluminum swash plate can be safely applied on a shaft instead of steel; it reduces weight while maintaining stability that is equal to or better than steel.

• 산업기술연구
• /
• 제42권1호
• /
• pp.1-5
• /
• 2022

Although the mileage of electric vehicles can be increased based on the excellent energy density of the LiNi_0.9Co_0.05Mn_0.05O₂, it is known that the reason for limiting its use is the low lifespan and poor surface stability due to the structural deformation of the LiNi_0.9Co_0.05Mn_0.05O₂. To improve the structural stability of LiNi_0.9Co_0.05Mn_0.05O₂, electrochemical performance is improved by La coating on the surface. La-modified LiNi_0.9Co_0.05Mn_0.05O₂ shows an initial capacity of 210.6 mAh/g, a capacity retention rate of 89.9 % after 50 cycles, and a retention rate of 52.5% at 6.0 C. These are superior performances than the pristine sample, because the structural stability of the LiNi_0.9Co_0.05Mn_0.05O₂ cathode is improved by the La coating.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.107-115
• /
• 2014

Highly functional mill turrets have been developed and continuously improved to shorten the manufacturing time and enable multiple uses. Among these, a mill turret with B-axis rotary table was developed. The B-axis rotary table should be evaluated for structural integrity. Moreover, its worm and worm gear for transmitting power should be able to endure fatigue damage. Therefore, this article presents a structural analysis of this type of B-axis rotary table and confirms its static stability by comparing the stress results to the allowable stress levels. Next, the dynamic stability of the rotary table was investigated via a mode analysis and a harmonic analysis in a range determined by the results of a modal analysis. Finally, a worm gear set, the main part that drives the rotary table, is analyzed for fatigue and to estimate its lifetime. The results of the fatigue analysis allowed a prediction of the life of the worm gear set. The analytical results show that the B-axis rotary table has good structural integrity.

• Journal of Microbiology
• /
• 제34권3호
• /
• pp.241-247
• /
• 1996

The stability of the genetically engineered microorganisms and their recombinant plasmids released in natural environments has been regarded as one of the molecular ecological topics. In this study, the recombinant plasmids pCU103 in which the pcbCD genes involved in biodegradation of biphenyl and 4-chlorobiphenyl were cloned in pBluescript SK(+) vector, were examined for their structural and functional stability in different waters at 15 $^{\circ}C$ by the methods of electrophoresis, Southern hybridization, quantification with fluorescent dye, and transformation. The recombinant plamids maintained their stabilities for about 30 days in sterilized distilled water (SDW), 15 days in autoclaved creek water (AW), 25 days in filtered and autoclaved non-sterile creek water (FAW), 4 days in Luria-Bertani (LB) broth, and less than one day in filtered non-sterile creek water (FW). The covalently closed circular (CCC) form of the plasmid was decreased and open circular (OC) form was increased as a function of incubation time, and then linear (L) form was produced to be ultimately degraded out. The degradation rates of the plasmid were proportionally correlated to trophic level of the water, and the biological factor such as DNases was found to be one of the most critical factors affecting structural and functional stability of the plasmid in non-sterile natural water.

• 항공우주시스템공학회지
• /
• 제11권4호
• /
• pp.44-47
• /
• 2017

본 연구는 자동차 배기계 센서 구성품의 진동 안정성 해석에 관한 연구이다. 본 연구에서 자동차 시스템의 배기 가스 센서의 구조 설계 및 해석을 수행하였다. 1차적으로 자동차 배기 시스템의 구조 설계 요구 조건이 분석되었다. 구조 설계 이후 유한 요소 해석 기법을 활용하여 배기계 측정 센서 시스템의 구조 해석이 수행되었다. 고온 조건에서 진동 및 열응력 해석이 수행되었다. 최종 센서 시스템의 구조 시험을 수행한 후 해석 결과와 비교하였다. 구조 해석을 통해 설계된 센서 구성품은 안전한 것으로 확인되었다.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.881-888
• /
• 2020

A butterfly valve is a valve that adjusts flow rate by rotating a disc for about 90° with respect to the axis that is perpendicular to the flow path from the center of its body. This valve can be manufactured for low-temperature, high-temperature and high-pressure conditions because there are few restrictions on the used materials. However, the development of valves that can be used in a 600℃ environment is subject to many constraints. In this study, the butterfly valve's stability was evaluated by a fluid-structured interaction analysis, thermal-structure interaction analysis, and seismic analysis for the development of valves that can be used in high-temperature environments. When the reverse-pressure was applied to the valve in the structural analysis, the stress was low in the body and seat compared to the normal pressure. Compared with the allowable strength of the material for the parts of the valve system, the minimum safety factor was approximately 1.4, so the valve was stable. As a result of applying the design pressures of 0.5 MPa and 600℃ under the load conditions in the thermal-structural analysis, the safety factor in the valve body was about 3.4 when the normal pressure was applied and about 2.7 when the reverse pressure was applied. The stability of the fluid-structure interaction analysis was determined to be stable compared to the 600℃ yield strength of the material, and about 2.2 for the 40° open-angle disc for the valve body. In seismic analysis, the maximum value of the valve's stress value was about 9% to 11% when the seismic load was applied compared to the general structural analysis. Based on the results of this study, the structural stability and design feasibility of high-temperature valves that can be used in cogeneration plants and other power plants are presented.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-139
• /
• 2005

The focused topic according to be slender and longer of cable stayed bridge's main span is as follows (1) Aerodynamic stability (2) Lateral movement of stiffening girder caused by wind force during and after construction (3) Global bucking of stiffening girder caused by axial force Among this, the number 3 has not received much attention in the past due to high buckling safety factor of stiffening girder. However, according to be slender of stiffening girder, the topic of buckling stability of girder is not any more unconcerned subject. The purpose of this paper is to examine the effect of stay cable's nonlinear behavior on the buckling stability of cable-stayed bridge.

• Structural Engineering and Mechanics
• /
• 제1권1호
• /
• pp.119-135
• /
• 1993

The paper presents a generalized optimal active control algorithm for earthquake-resistant structures. The study included the weighting matrix configuration, stability, and time-delays for achieving control effectiveness and optimum solution. The sensitivity of various time-delays in the optimal solution is investigated for which the stability regions are determined. A simplified method for reducing the influence of time-delay on dynamic response is proposed. Numerical examples illustrate that the proposed optimal control algorithm is advantageous over others currently in vogue. Its feedback control law is independent of the time increment, and its weighting matrix can be flexibly selected and adjusted at any time during the operation of the control system. The examples also show that the weighting matrix based on pole placement approach is superior to other weighting matrix configurations for its self-adjustable control effectiveness. Using the time-delay correction method can significantly reduce the influence of time-delays on both structural response and required control force.

• 한국항공운항학회지
• /
• 제15권3호
• /
• pp.6-14
• /
• 2007

In this research, vibration reduction and aeroelastic stability of a composite hingeless rotor hub flexure with viscoelastic constrained layer damping treatment(CLDT) were investigated. The composite flexures with viscoelastic CLDT were applied to hingeless rotor system to improve the in-plane stability of the lead-lag motion causing resonance. The modal test was performed and dynamic properties(natural frequency and loss factor) were acquired. Also, complex eigenvalue analysis(SOLlO7) in the NASTRAN structural analysis module was performed and compared with results of the modal test. To insure aeroelastic stability, damping ratio analyses of the hingeless rotor system with CLDT were accomplished at hovering condition due to collective pitch angle changes. Satisfactory results of increasing structural damping and stability were obtained.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.207-215
• /
• 2003

Developed is a new environment-friendly concrete-block retaining wall system. The conventional analysis methods are not directly applicable because the proposed concrete-block wall system is made of by interlocking the blocks with shear keys. Therefore, the shear analysis as well as stability analysis have been conducted to secure the safety of block-wall system. Overall slope stability analysis was also performed. An appropriate strengthening method was developed to ensure the safety when the block-wall system is relatively high. The method of analysis for strengthening the concrete-block wall system was also proposed. The proposed environment-friendly concrete block retaining wall system shows reasonable safety and can be a good construction method for retaining walls and river bank walls.