• 한국안전학회지
• /
• 제28권2호
• /
• pp.78-83
• /
• 2013

The traffic culture index is used as a major index in evaluating the traffic safety services of local governments and also serve as important data for the planning and implementation of traffic safety services. However, as the traffic culture index gradually became a standard for comparison among local governments, in part, certain cases arose which questioned the grounds for selecting variables for the index and the validity of the index in terms of its influential relationship between evaluation items. This study analyzed the index's influential relationship by utilizing a PLS structural equation model based on the evaluation results of the 2011 traffic culture index. A variable-linking model was created which recognized the relativity taking into account of the indirect effects between latent variables and this model was proven to be a model suitable in explaining the traffic culture index with a 97.8% explanation power. It was found that traffic safety(0.530), driving behavior(0.527), pedestrian behavior(0.187) and vulnerable road users(0.147), in such order, had an effect on the traffic culture index. It was also found that human casualties due to traffic accidents under "traffic safety" and traffic light compliance rate under "driving behavior" had an important effect. The study showed that motor vehicle share in illegal parking in school zones did not have a valid explanation power regarding "vulnerable road users".

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.288-293
• /
• 2008

The standard prestressed concrete I-girder bridge (PSC I-girder bridge) is one of the most prevalent types for small and medium bridges in Korea. When determining the member forces in a section to assess the safety of girder in this type of bridge, the general practice is to use the simplified practical equations or the live load distribution factors proposed in design standards rather than the precise analysis through the finite element method or so. Meanwhile, the live load distribution factors currently used in Korean design practice are just a reflection of overseas research results or design standards without alterations. Therefore, it is necessary to develop an equation of the live load distribution factors fit for the design conditions of Korea, considering the standardized section of standard PSC I-girder bridges and the design strength of concrete. In this study, to develop an equation of the live load distribution factors, a parametric analysis and sensitivity analysis were carried out on the parameters such as width of bridge, span length, girder spacing, width of traffic lane, etc. Then, an equation of live load distribution factors was developed through the multiple linear regression analysis on the results of parametric analysis. When the actual practice engineers design a bridge with the equation of live load distribution factors developed here, they will determine the design of member forces ensuring the appropriate safety rate more easily. Moreover, in the preliminary design, this model is expected to save much time for the repetitive design to improve the structural efficiency of PSC I-girder bridges.

• 한국농공학회논문집
• /
• 제66권1호
• /
• pp.39-48
• /
• 2024

Plastic greenhouses are simple structures consisting of lightweight materials such as steel pipes and polyvinyl chloride. However, serious damage occurs due to heavy winds and typhoon every year. To prevent a collapse of structural members, the Ministry of Agriculture and Rural Development has distributed plans and specifications for disaster-resistant standards. Despite these efforts, more than 50% of greenhouses still do not satisfy the disaster-resistant standards. Among the greenhouses that do not meet these standards, 85% are single-span greenhouses proposed 20 years ago. Consequently, there is a need to evaluate the safety of wind loads for the single-span greenhouse. Unfortunately, there are no design specifications for the greenhouses under wind loads. Therefore, a Korean design standard (KDS) has been utilized. KDS is defined with reference to wind speeds occurring once every 500 years, raising concerns about potential overdesign when considering the durability of plastic greenhouses. To address this, the modified wind load, considering the durability of the plastic greenhouse, was calculated, and a safety evaluation was conducted for sigle G-type plastic greenhouse. It was observed that the moment acting on the windward surface was substantial, and there was a risk of the foundation being pulled out if the basic wind speed exceeded 32 m/s. In terms of the combination strength ratio, it was less than 1.0 only on the leeward side when the basic wind speed was 24 m/s and 26 m/s. However, in all other cases, it exceeded 1.0, indicating an unsafe condition and highlighting the necessity for reinforcement.

• International Journal of Safety
• /
• 제5권2호
• /
• pp.24-28
• /
• 2006

There are many structural problems when the scaffolding frame is applied to a construction site contractor may use a used pipe or buckled pipe which they lended them from commercial firms without any inspection of those materials even though they have been used and exposed to weather for a long times. Therefore, they should be checked of their current capacity, comparing with the original one so that construction contractor can apply their capacity to a temporary frame depending on the site situation against collapsion of those. This study is mainly focused on the behavior of a scaffolding frame using prebuckled pipes. Additionally, standard frame with bracing and without bracing case are also tested for comparing with the prebuckled case. Prebuckled case has its capacity less approximately 20 % than the standard frame.

• Structural Engineering and Mechanics
• /
• 제70권1호
• /
• pp.33-41
• /
• 2019

The influence of two parameters on fatigue damage predictions of a variably loaded cantilever beam has been examined. The first parameter is the geometry of the cantilever beam and the weld connecting it to a rear panel. Variables of the geometry examined here include the cantilever length, the weld width on the critical cross-section and the angle of the critical cross-section. The second parameter is the safety factor, as set out by the Eurocode 3 standard. An analytical approach has been used to calculate the stresses at the critical cross-section and standard rainflow counting has been used for the extraction of the load cycles from the load history. The results here suggest that a change in the width and angle of the critical cross-section has a non-linear impact on the fatigue damage. The results also show that the angle of the critical cross-section has the biggest influence on the fatigue damage and can cause the weld to withstand fatigue better. The second parameter, the safety factor, is shown to have a significant effect on the fatigue damage calculation, whereby a slight increase in the endurance safety factor can cause the calculated fatigue damage to increase considerably.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.781-810
• /
• 2017

Purpose: This paper studied about the integration for management system of representative international standard related to sustainable development. The well-known International standards such as ISO 9001, ISO 14001 and OHSAS 18001 (ISO 45001) can be operated in accordance with the organizational situation individually, or in a variety of ways of integration. It can be applied to help organizations utilizing the newly established "ISO IEC Directive Part1 Annex SL", when integrating quality, environmental and safety & health management systems based on international standards. Methods: We conducted an empirical survey of management executives and experts to study how three factors (management systems, organizational capabilities and integration methods) could affect business performance. Results: The questionnaire was analyzed using AMOS structural equation model. Quality, environmental and safety and health management systems affected management performance, and integration methods of management system affected business efficiency, risk performance and financial performance. Integration method is also important because organizational competence affects various aspects of integrated management. However, factors that affect integration should also be considered in terms of organizational capabilities. This is because organizational capacity influences the integration plan. Conclusion: To integrate the document system at the strategic level, management should actively participate in integrated operations to integrate organizations, eliminate duplicate tasks, and foster document integration experts to reflect the characteristics of individual standard. In the case of document integration, quality management is focusing, but once ISO 45001 is issued, the use of Annex SL is increasing, and Quality, environment and safety & health integration will also be expanded. It is possible to increase the effect of integration by strategically approaching and establishing organization document system rather than simple integration according to management system standard arrangement.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.151-158
• /
• 2005

For the safety analysis of large structures such as nuclear containment buildings, we conventionally prefer to use analytical approach using finite element method rather than empirical test. Therefor, this paper is mainly focused to develop low-order solid finite element model with the elasto-plastic material model for the safety analysis of nuclear containment building. Drucker-Prager failure criteria in uncracked concrete and maximum tensile stress criteria in cracked concrete are used to model the constitutive behavior of concrete. The concrete material model takes into account the aspects of tensile strain, compression strength reduction of concrete and shear transfer to improve the accuracy of the finite element analysis. Finally, numerical simulation to compare the performance of the developed model with experimental results is employed. The numerical results in this study agree very well with the experimental data.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.166-173
• /
• 2006

This paper investigated strength of a bogie frame for Korean tilting train that is being developed in KRRI. In this study, static load tests based on Japanese Industrial Standard (JIS) were performed. In order to simulate vertical and lateral components generated by tilting link mechanism, four hydraulic actuators were used. The eight load cases such as vertical, lateral, traction, braking and driving gear loads were applied for evaluation of the strength of bogie frame. The stresses measured at the stress concentration points were assessed using Goodman diagram. From the experimental results, structural safety of the bogie frame could be ensured.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.31-37
• /
• 2011

Pressurized Water Reactor Owners Group(PWROG) proposed and applied a risk-informed inservice inspection(RI-ISI) program to alternate existing ASME Section XI periodic inspections. The RI-ISI programs enhance overall safety by focusing inspections of piping at high safety significant(HSS) and locations where failure mechanisms are likely to be present, and by improving the effectiveness on inspection of components because the examination methods are based on the postulated failure mode and the configuration of the piping structural element. The RI-ISI programs can reduce NDE, man-rem exposure, costs of engineering analysis, outage duration and chance of complicating plant operations etc. RI-ISI methods of piping inservice inspection were applied on 3 units(KSNP : Korea Standard Nuclear Power Plant) and are scheduled to apply on the other units. In this paper, we compared and showed the results of the 2 units and we concluded that the RI-ISI application could enhance and maintain plant safety and give unquantifiable benefits.

• 한국화재소방학회논문지
• /
• 제28권2호
• /
• pp.76-81
• /
• 2014

화재와 같은 고온 시 구조부재의 붕괴를 방지함으로써 재실자와 소방관계자 그리고 재산을 보호할 수 있는 방법은 구조부재의 내화성능을 확보하는 것이며, 이는 시방적 내화설계방법인 내화시험을 통하여 확보되어 왔다. 그러나 내화시험에 수반되는 시험체 제작과 운반 그리고 막대한 시험 비용의 반복적 사용 등은 새로운 공법과 재료 개발의 문제점으로 대두되었다. 따라서 본 연구에서는 일반 등급(SS 400) 강재의 고온 시 항복강도, 탄성계수와 열전달 및 열응력 해석을 적용하여 H형강 보부재의 표면온도 상승 및 고온 시 내력 변화를 평가하였다. 또한 H형강 보부재의 길이 변화에 따른 고온 시의 보부재의 내력평가를 수행하여 각각의 길이변화에 따른 내력 변화의 차이를 평가하였다.