• 전산구조공학
• /
• 제7권3호
• /
• pp.115-122
• /
• 1994

불확정 구조계획의 선형 고유치 문제는 재료정수나 경게조건 및 외부하중 등에 결정론적으로 사용할 수 없는 확률량을 포함하고 있다. 변동량을 내포한 고유치 문제의 해석은 기대치에 대한 지배 방정식과 변동량 결정방정식을 고려해야 한다. 비선형성이 심한 구조계를 선형화할 대 일차 및 이차 변동값을 반영함으로 고유치의 정도를 향상시킬 수 있다. 매개변수에 불확정성을 포함한 고유치 문제는 최적설계 정식화에서 변동된 값을 고료해 줌으로 신뢰성 있는 설계가 된다. 최적설계 알고리즘 중에는 목적함수와 제한 조건식의 설계 민감도를 요한다. 이차 기울기에 근거를 둔 최적설계 수행시에 변동량에 고려하여 제한식으로 설정하고, 설계 민감도를 구할 수 있는 방법을 제시하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.38-45
• /
• 1994

The general conceptual constitution of structural optimization is formulated. The algorithm using the gradient projection method and design sensitivity analysis is discussed. Examples of minimum-weight design for six-story steel plane frame are taken to illustrate the application of this algorithm. The advantages of this algorithm such as marginal cost and design sensitivity analysis as well as system analysis are explained.

• 패션비즈니스
• /
• 제28권1호
• /
• pp.1-19
• /
• 2024

This study explores application of upcycling design methods in structural transformation of second-hand denim clothing, aiming to achieve sustainable design objectives. By drawing inspiration from Liu Qing's research methods in the field of circular utilization of denim clothing, this study collected and analyzed cases of structural transformation of used denim clothing from 2020 to 2023. It summarized structural transformation design methods for used denim clothing. Through the development of design works, this study aims to find out the best upgrading and renovation design strategy by applying the method of structural renovation design. This study aims to support the development of a sustainable fashion industry and promote recycling and upcycling of discarded clothing fabrics, thereby reducing resource waste and environmental impact.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.291-298
• /
• 2006

A parallelized topology design optimization method is developed on a distributed memory system. The parallelization is based on a domain decomposition method and a boundary communication scheme. For the finite element analysis of structural responses and design sensitivities, the PCG method based on a Krylov iterative scheme is employed. Also a parallelized optimization method of optimality criteria is used to solve large-scale topology optimization problems. Through several numerical examples, the developed method shows efficient and acceptable topology optimization results for the large-scale problems.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.872-881
• /
• 1996

The concept of homology design has been devised for the application to large telescope structure by S.v.Hoerner. It is defined that the deformation of a structure shall be called homologous, if a given geometrical relation holds, for a given number of structural points, before, during, and after the deformation. Recently, the need of homology design in the structural design has been increase due to the required precision in the structure. Some researchers have utilized the theory on the structural design with finite element method in the late 1980s In the present investigation, a simple method using geometrical equality constraints is suggested to gain homologous deformation. The previous method is improved in that the decomposition of FEM eqation, which is very expensive, is not necessary. The basic formulations of the homology design with the optimization concept are described and several practical examples are solved to verify the usefulness and validity. Especially, a back-up structure of a satellite antenna is designed by the suggested method. The results are compared with those of existing researches.

• International Journal of Aerospace System Engineering
• /
• 제3권1호
• /
• pp.17-20
• /
• 2016

In this work, a structural design on horizontal axis wind turbine blade using natural flax fiber composite is performed. The structural design results of flax/epoxy composite blade are compared with the design results of glass/epoxy composite blade. In order to evaluate the structural design of the composite blade, the structural analysis was performed by the finite element method. Through the structural analyses, it is confirmed that the designed blade using natural composite is acceptable for structural safety, blade tip deflection, structural stability, resonance possibility, and weight. Finally, structural test of manufactured blade was performed. Through the structural test, it is confirmed that the designed blade is acceptable.

• 항공우주시스템공학회지
• /
• 제17권5호
• /
• pp.58-62
• /
• 2023

본 연구에서 항공기 엔진 내부 구성품의 구조 설계 결과에 대한 구조 안전성 평가 연구를 수행하였다. 엔진 내부 구성품에 라디에이터와 인터쿨러가 장착된다. 따라서 비행중에 라디에이터와 인터쿨러의 안전성을 검토하였다. 구조 해석을 통해 구조 안전성을 평가하였다. 구조 해석 기법은 유한 요소 해석 기법을 활용하였다. 구조 설계 및 해석을 위하여 가속도 하중을 고려하였다. 구조 안전성 평가 결과 구조 설계 결과는 타당한 것으로 확인되었다.

• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.135-140
• /
• 2003

In the deterministic optimization of a structural system, objective function, design constraints and design variables, are treated in a nonstatistical fashion. However, such deterministic engineering optimization tends to promote the structural system with lest reliability redundancy than obtained with conventional design procedures using the factor of safety. Consequently, deterministic optimized structures will usually have higher failure probabilities than unoptimized structures. Therefore, a balance must be developed between the satisfactions of the design requirements and the objectives of reducing manufacturing cost. This paper proposes the reliability-based design optimization (RBDO) technique, which enables the optimum design that considers confidence level for the vibration characteristics of structural system. Response surface method (RSM) is utilized to approximate the performance functions describing the system characteristics in the RBDO procedure. The proposed optimization technique is applied to the pillar section design considering natural frequencies of a vehicle structure.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1210-1216
• /
• 2003

Topology optimization is applied to determine the layout of a structural component with a specified frequency by minimizing the difference between the specified structural frequency and a given frequency. The homogenization design method is employed and the topology design problem is solved by the optimality criteria method. The value of a weighting factor in the optimality criteria plays an important role in this topology design problem. The modified optimality criteria method approximated by using the binomial expansion is suggested to determine the suitable value of the weighting factor, which makes convergence stable. If a given frequency is set as an excited frequency, it is possible to avoid resonance by moving away the specified structural frequency from the given frequency. The results of several test problems are compared with previous works and show the validity of the proposed algorithm.

• Smart Structures and Systems
• /
• 제4권6호
• /
• pp.779-794
• /
• 2008

Observer-based fault detection and isolation (FDI) filter design method is a model-based method. By carefully choosing the observer gain, the residual outputs can be projected onto different independent subspaces. Each subspace corresponds to the monitored structural element so that the projected residual will be nonzero when the associated structural element is damaged and zero when there is no damage. The key point of detection filter design is how to find an appropriate observer gain. This problem can be interpreted in a geometric framework and is found to be equivalent to the problem of finding a decentralized static output feedback gain. But, it is still a challenging task to find the decentralized controller by either analytical or numerical methods because its solution set is, generally, non-convex. In this paper, the concept of detection filter and iterative LMI technique for decentralized controller design are combined to develop an algorithm to compute the observer gain. It can be used to monitor structural element state: healthy or damaged. The simulation results show that the developed method can successfully identify structural damages.