• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.98-133
• /
• 1987

The mechanical and rheological properties of agricultural materials are important for engineering design and analysis of their mechanical harvesting, handling, transporting and processing systems. Agricultural materials, which composed of structural members and fluids do not react in a purely elastic manner, and their response when subjected to stress and strain is a combination of elastic and viscous behavior so called viscoelastic behavior. Many researchers have conducted studies on the mechanical and rheological properties of the various agricultural products, but a few researcher has studied those properties of rice plant, and also those data are available only for foreign varieties of rice plant. This study are conducted to experimentally determine the mechanical and the rheological properties such as axial compressive strength, tensile strength, bending and shear strength, stress relaxation and creep behavior of rice stems, and grain detachment strength. The rheological models for the rice stem were developed from the test data. The shearing characteristics were examined at some different levels of portion, cross-sectional area, moisture content of rice stem and shearing angle. The results obtained from this study were summarized as follows 1. The mechanical properties of the stems of the J aponica types were greater than those of the Indica ${\times}$ Japonica hybrid in compression, tension, bendingand shearing. 2. The mean value of the compressive force was 80.5 N in the Japonica types and 55.5 N in the Indica ${\times}$ Japonica hybrid which was about 70 percent to that of the Japonica types, and then the value increased progressively at the lower portion of the stems generally. 3. The average tensile force was about 226.6 N in the Japonica types and 123.6 N in the Indica ${\times}$ Japonica hybrid which was about 55 percent to that of the Japonica types. 4. The bending moment was $0.19N{\cdot}m$ in the Japonica types and $0.13N{\cdot}m$ in the Indica ${\times}$ Japonica hybrid which was 68 percent to that of the Japonica types and the bending strength was 7.7 MPa in the Japonica types and 6.5 MPa in the Indica ${\times}$ Japonica hybrid respectively. 5. The shearing force was 141.1 N in Jinju, the Japonica type and 101.4 N in Taebaeg, the Indica ${\times}$ Japonica hybrid which was 72 percent to that of Jinju, and the shearing strength of Taebaeg was 63 percent to that of Jinju. 6. The shearing force and the shearing energy along the stem portion in Jinju increased progressively together at the lower portions, meanwhile in Taebaeg the shearing force showed the maximum value at the intermediate portion and the shearing energy was the greatest at the portion of 21 cm from the ground level, and also the shearing strength and the shearing energy per unit cross-sectional area of the stem were the greater values at the intermediate portion than at any other portions. 7. The shearing force and the shearing energy increased with increase of the cross-sectional area of the rice stem and with decrease of the shearing angie from $90^{\circ}$ to $50^{\circ}$. 8. The shearing forces showed the minimum values of 110 N at Jinju and of 60 N at Taebaeg, the shearing energy at the moisture content decreased about 15 percent point from initial moisture content showed value of 50 mJ in Jinju and of 30 mJ in Taebaeg, respectively. 9. The stress relaxation behavior could be described by the generalized Maxwell model and also the compression creep behavior by Burger's model, respectively in the rice stem. 10. With increase of loading rate, the stress relaxation intensity increased, meanwhile the relaxation time and residual stress decreased. 11. In the compression creep test, the logarithmic creep occured at the stress less than 2.0 MPa and the steady-state creep at the stress larger than 2.0 MPa. 12. The stress level had not a significant effect on the relaxation time, while the relaxation intensity and residual stress increased with increase of the stress level. 13. In the compression creep test of the rice stem, the instantaneous elastic modulus of Burger's model showed the range of 60 to 80 MPa and the viscosities of the free dashpot were very large numerical value which was well explained that the rice stem was viscoelastic material. 14. The tensile detachment forces were about 1.7 to 2.3 N in the Japonica types while about 1.0 to 1.3 N in Indica ${\times}$ Japonica hybrid corresponding to 58 percent of Japonica types, and the bending detachment forces were about 0.6 to 1.1 N corresponding to 30 to 50 percent of the tensile detachment forces, and the bending detachment of the Indica ${\times}$ Japonica hybrid was 0.1 to 0.3 N which was 7 to 21 percent of Japonica types. 15. The detachment force of the lower portion was little bigger than that of the upper portion in a penicle and was not significantly affected by the harvesting period from September 28 to October 20. 16. The tensile and bending detachment forces decreased with decrease of the moisture content from 23 to 13 percent (w.b.) by the natural drying, and the decreasing rate of detachment forces along the moisture content was the greater in the bending detachment force than the tensile detachment force.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.195-221
• /
• 2009

According to an industry report, a large number of organizations have invested in Organizational Information System(OIS) in the past few years. Several research results indicate that successful investments in OIS lead to productivity enhancement, while failed ones result in undesirable consequences such as financial losses and dissatisfaction among employees. In spite of huge investments, however, many organizations have failed in achieving the hoped-for returns from OIS. Thus, understanding user acceptance, adoption, and usage of new IS(Information Systems) is an important issue for IS practitioners. Indeed, study of the user acceptance of new information system has been one of the most important research topics in the contemporary IS literature. Several theoretical models are tested to examine 'user acceptance' and 'usage behavior' in IS context. While many research models incorporate 'ease of use' or 'usefulness' as important factors in explaining user acceptance, Technology Acceptance Model(TAM) has been one of the most widely applied models in user acceptance and usage behavior. Even in recent IS studies that employ theories of innovation diffusion in the area of IS implementation, a major focus has been on the user's perception of information technologies. In this research, we study 'voluntariness' as an important factor in IS acceptance by users. Voluntariness is defined as "the degree to which the use of the innovation is perceived as being voluntary, or of free will" When examining the diffusion of accepting OIS, a thoughtful consideration should be given to 'perceived voluntariness.' Current article has following research questions: 1) What models are appropriate to explain the success of OIS? and 2) How does the 'voluntariness' affect the success of OIS? In order to answer these questions, a research model is proposed to describe the detailed nature of association among three independent variables (IT usage level, task interdependency, and organizational support), a mediating variable (IS usage), a dependent variable (perceived performance), and a moderating variable(perceived voluntariness). The central claim of this article is that organizations hardly realize expected returns from OIS investments unless perceived voluntariness is effectively managed after operating OIS. As an example of OIS in this study we have selected the Intranet of Republic of Korea Air Force (ROKAF). ROKAF has implemented the Intranet in an attempt to improve communication and coordination within the organization. To test our research model and hypotheses, survey questionnaires were first sent out to 400 Intranet users. With the assistance of ROKAF, Intranet users were initially identified among its members, and subjects were randomly drawn from the pool. 377 survey responses were finally returned. The unit of measurement and analysis in this research is a personal level. Path analysis based on structural equation modeling was used to test research hypotheses. Construct validity represents accordance between the theoretical base concept of constructs and its measurement items. Tests for the reliability and discriminant validity are accepted, thus verifying our survey instrument. In this research, we have proposed a conceptual framework to highlight the importance of perceived voluntariness after organization deploys OIS. The results of our analysis present several key finding. First, all three independent variables (IT usage level, task interdependency, and organizational support) have significant effects on IS usage, which will eventually improve performance. Thus, IS usage plays a mediating role between antecedent variables (IT usage level. task interdependency, and organizational support) and performance improvement. Second, the effect of the task dependency was the highest for IS usage among the three antecedent variables. This is highly plausible since one of the Intranet's major capabilities is to facilitate communication among members within an organization. Accordingly, we conclude that the higher the task dependency, the higher Intranet usage. The effect of user's IT usage level was the second, while the effect of the organizational support was the third. Finally, the perceived voluntariness plays a pivotal role in enhancing perceived performance in personal level after launching the Intranet. Relationships among investigated variables were significantly different between groups with a high level and a low level of voluntariness. The impact of the Intranet usage on the performance was greater in the higher level voluntariness group than in the lower one. For the lower level voluntariness group, the user's IT usage had the highest effect on the Intranet usage among the three antecedent variables. In short, our study suggests that the higher the perceived voluntariness is the more IS usage will be. Perceived voluntariness was found to have a moderating effect on the relationships among user IT usage level, task interdependency, IS usage, and perceived performance, supporting all the hypotheses on the moderating effect. Most of all, user IT usage level has the strongest influence on IS usage, indicating that users with superior IT usage are more likely to enjoy a high level of perceived performance.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.584-592
• /
• 2001

The cracks are developed in reinforced concrete(RC) beams at the early stage of service load because of the relatively small tensile strength of concrete. The structural strength and stiffness are decreased by reduction of tensile resistance capacity of concrete due to the developed cracks. Using the fiber reinforced concrete that is increased the flexural strength and tensile strength at tensile part can enhance the strength and stiffness of concrete structures and decrease the tensile flexural cracks and deflections. Therefore, the RC beams used of the fiber reinforced concrete at. tensile part ensure the safety and serviceability of the concrete structures. In this work, analytical model of a dual concrete beams composed of the normal strength concrete at compression part and the high tension strength concrete at tensile part is developed by using the equilibrium conditions of forces and compatibility conditions of strains. Three groups of test beams that are formed of one reinforced concrete beam and two dual concrete beams for each steel reinforcement ratio are tested to examine the flexural behavior of dual concrete beams. The comparative study of total nine test beams is shown that the ultimate load of a dual concrete beams relative to the RC beams is increased in approximately 30%. In addition, the flexural rigidity, as used here, referred to the slope of load-deflection curves is increased and the deflection is decreased.

• Journal of Fashion Business
• /
• v.15 no.1
• /
• pp.103-114
• /
• 2011

This study is to provide basic information on clothing fitness necessary to develop apparel products for Korean companies that want to enter or have already made inroads into the Chinese market. In an effort to serve this purpose, a standard upper torso body model for Chinese women was established by applying the Rohrer Index and Size Designation of Clothes - Women of GB/T 1335.2-1997 to Chinese women in their 20s to determine body types and its characteristics. First, according to the result of applying the Rohrer Index to categorize body types, Type 1 showed the longest vertical body length and a short horizontal length with the lowest degree of flatness. Type 2 was a standard body type with a height of 158.73cm, weight of 53.02kg and the Rohrer Index of 1.32. Type 3 had a thick and flat body shape that had the highest degree of flatness and the shortest vertical length in its upper torso among all three types of body. Second, F-test was conducted on 4 distinctive body types obtained from comparing obesity scores to verify differences in body shapes for different degree of obesity. The test result indicated significant differences in 3 of the 4 body types and showed different structural components for different degree of obesity. Third, the result of comparing correlational distributions of body types and height range, and body types and degree of obesity for all and specified age groups revealed that about 33.30% of the body types appeared in Type2-A followed by 20.18% in Type1-A, 18.40% in Type2-Y and 7.91% in Type1-Y respectively. Body types and degree of obesity for two different age groups were most frequent in Type2-A. For the group of young women in their early 20s appeared the most in Type2-A, Type1-A, Type2-Y and Type 1-Y respectively and young women in late 20s were frequent in the order of Type2-A, Type2-Y, Type1-A and Type1-Y.

• Trans-
• /
• v.6
• /
• pp.97-127
• /
• 2019

This study investigated the specific effects of dance themed movies on dance students in their passion for dance and affect. The related data is generated by choosing a method of Convenience Sampling and used a sample of 112 dance students in high school of arts which located in Seongnam-si, South Korea. The dance students divided into 3 group of school year and also 2 group of gender. The dance themed movies which are used in this research are First Position, Billy Elliot and Mao's Last Dancer. Also, the dance students were asked to answer the survey which are based on the Self-administration. In order to obtain several findings below, Frequency analysis, Exploratory factor analysis, Reliability analysis, t-test, ANOVA, Correlation analysis and Linear structural relation model were applied to the gathered data using statistics utility SAS 9.4. First, there was a significant difference between the school years in the passion for dance and affect of students after watching movies. Second, there was a significant difference in students' affect depended on their majors (dance major is divided into three specialized major which are ballet, korean dance and modern dance). Third, there was a significant difference in the passion for dance and students' affect which is irreverent to their dance career (such as years they have learned dance). Forth, there was a significant difference in the passion for dance and negative affect of 'dance' students after watching movies. To summarize, the findings demonstrate that there is a partial difference, specially significant effects on their negative affect in the dance passion and affect of dance students depended on their characteristics after watching dance themed movies.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.23-34
• /
• 2016

Concrete filled steel tube system has two major advantages. First, the confinement effect of steel tube improves the compressive strength of concrete. Second, the load capacity and deformation capacity of members are improved because concrete restrains local buckling of steel tube. It does, however, involve workability problem of using stud bolts or anchor bolts to provide composite effect for larger cross-sections. While the ribs inside the columns are desirable in terms of compressive behavior, they cause the deterioration in load capacity upon in-plane deformation resulting from thermal deformation. Since the ribs are directly connected with the concrete, the deformation of the ribs accelerates concrete cracking. Thus, it is required to improve the toughness of the concrete to resist the deformation of the ribs. Welding built-up tubular square columns can secure safety in terms of fire resistance if the problem are solved. This study focuses on mixing steel fiber in the concrete to improve the ductility and toughness of the columns. In order to evaluate fire resistance performance, loaded heating test was conducted with 8 specimens. The behavior and thermal deformation capacity of the specimens were analyzed for major variables including load ratio. The reliability of heat transfer and thermal stress analysis model was verified through the comparison of the results between the test and previous study.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.65-76
• /
• 2015

Purpose - This article aims to present and test a model regarding franchisors' supporting activities that may positively influence franchisees' attitude toward the franchising headquarter and their own business performance. Moreover, the authors examine the moderating effect of competitive intensity between franchisee attitude and business performance. Most previous research focused on behavioral performance measurements such as satisfaction, trust, and commitment. There are few empirical studies that focus on financial performance data because it is difficult to determine a relational mechanism between behavioral and financial performance. Moreover, financial data is confidential and difficult to collect in many cases. However, this study measures financial performance (e.g., sales revenue per square meter) differently than most previous research, which is mostly focused on the behavioral performance measurements. Research design, data, and methodology - To test our hypotheses, we selected 137 franchisee managers who are running chains of one of the foremost bakery franchise brands in South Korea. This study carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed instrument by analyzing the data obtained from the samples. The data was analyzed using the AMOS structural equation modeling program. Results - The results indicated that: non-financial support activities (e.g., information exchange and communication) had a positive impact on the franchisee attitude toward the franchising headquarter. The franchisee attitude in turn had a positive effect on the headquarters' business performance. Furthermore, competitive intensity could enhance the relationship between franchisee attitude toward franchising headquarter and business performance in a local franchise market. However, financial support activities (e.g., rewards and promotional support) and training had no relationship with either franchisee attitude or business performance. Conclusions - This study provides some practical implications to franchisors in terms of franchise operation and store opening strategies. With respect to the franchise operation strategy, franchisors need to focus on non-financial rather than financial support. Most franchisees consider the necessity of financial support activities and not their sufficiency because these activities are specified in their franchise contract. In addition, it is important for franchisees to maintain a positive attitude for the franchise headquarters. The franchisees with a positive attitude for the franchisor can show a high degree of solidarity for various support activities, and it consequently determines franchisees' sales performance. In terms of franchise store opening strategy, this study suggests an additional criterion that can be considered in determining the location of direct and non-direct management stores (e.g., franchisees' stores). In this research, franchise stores located within high level of competitive intensity are shown to have a high relationship between franchisee attitudes of franchisor support activities and business performance compared to the franchisees located within low competitive intensity level. This result shows that opening non-direct franchise stores is more effective than direct stores in higher competitive market situations. Research contribution, implications, and further research directions are discussed at the end of the paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.596-603
• /
• 2020

'Electro-Mechanical Brake (EMB) is a novel braking system for automobiles and railway vehicles, and research in this area is actively underway. The current braking system for railway vehicles generates a braking force using a pneumatic cylinder, but the EMB system generates the force through a combination of an electric motor and gears. In this study, the design of an EMB system that meets the domestic standards was conducted through the finite element modeling and fatigue analysis of an eccentric rotating shaft-based EMB system capable of generating a high clamping force. At this time, to improve the accuracy of fatigue analysis, three types of fatigue test specimens, which were subjected to the same heat treatment as the materials used in the prototype, were produced, and the fatigue tests were performed for each material. The fatigue properties (S-N curves) were obtained from the fatigue test results for each material and reflected in the analysis model. The results of fatigue analysis confirmed that the design of the EMB prototype could satisfy the maximum commercial braking/relaxation of 530,000 times, which was the endurance life condition for domestic railway vehicles. In addition, based on this design, a prototype will be manufactured, and endurance testing will be completed to demonstrate the durability characteristics of the developed prototype.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.323-334
• /
• 2014

In this paper, experimental program and associated numerical study were carried out to evaluate the fire resistance of unprotected concrete-filled rectangular steel tubular (CFT) columns subjected to the standard fire. The key testing parameters included the length effect, the load ratio, and the sectional dimensions of the CFT columns. Temperature distribution and axial deformation of the CFT column specimens were measured and analyzed. Rather early local buckling of steel tubes was observed in all the specimens. This caused subsequent load transfer from steel tube to concrete, and eventually triggered concrete crushing, or complete loss of the load bearing capacity of the column. This implies that the limit state of local buckling as well as overall flexural buckling should be incorporated in fire design procedure. As expected, the fire resistance time of specimen with higher load ratio consistently lessened. The prediction of fire resistance time of unprotected CFT columns based on the limiting steel temperature in current design codes or the formula proposed by previous studies is slightly conservative compared to the fire test results available. To establish the finite element analysis model that can be used to predict the thermal and structural behaviour of unprotected CFT columns in fire, the fully coupled thermal-stress analysis was also tried by using the commercial code ABAQUS. The numerical results showed a reasonable global correlation with the experimental results.