• Structural Monitoring and Maintenance
• /
• 제9권2호
• /
• pp.157-177
• /
• 2022

In this paper, an innovative finite element updating method is presented based on the variation wavelet transform coefficients of Auto/cross-correlations function (WTCF). The Quasi-linear sensitivity of the wavelet coefficients of the WTCF concerning the structural parameters is evaluated based on incomplete measured structural responses. The proposed algorithm is used to estimate the structural parameters of truss and plate models. By the solution of the sensitivity equation through the least-squares method, the finite element model of the structure is updated for estimation of the location and severity of structural damages simultaneously. Several damage scenarios have been considered for the studied structure. The parameter estimation results prove the high accuracy of the method considering measurement and mass modeling errors.

• 한국전산구조공학회논문집
• /
• 제26권5호
• /
• pp.385-392
• /
• 2013

유한요소법은 구조해석법으로 가장 많이 사용되는 방법으로 자리잡고 있으며, 근래에는 다소 복잡한 동적 및 비선형 문제에도 사용이 일반화되고 있다. 이러한 거동 예측이 어려운 구조해석에도 구조물을 적절한 유한요소와 요소망으로 표현하면 신뢰있는 해석 결과를 얻을 수 있다. 구조물의 동적 또는 비선형 거동에는 예상하지 않은 부분에서 큰 변형이 일어날 수 있으며, 유한요소해석 과정에서 같은 요소망을 계속 사용하면 요소의 모양이 신뢰 범위 밖으로 변형될 수 있으므로 요소망 역시 동적으로 적응할 필요가 있다. 또한, 유한요소 프로그램의 사용자 요구 사항 중 하나가 실시간으로 빠르게 진행되는 것이므로 연산면에서 효율적이어야 한다. 본 연구는 시간영역 동적해석에서 전 단계 해석 결과를 사용하여 계산된 대표 변형률값을 오차 평가에 사용하여 절점 이동인 r-법과 요소 분할인 h-법의 조합으로 요소 세분화를 진행하여 동적으로 적응하는 요소망 형성 과정을 기술한다. 해석 중 과대하게 변형되는 요소는 모양계수 개념으로 방지한다. 간단한 프레임의 동적 유한요소해석을 예제로 정확성과 연산 효율성을 보여준다. 본 연구에서 제시하는 적응적 유한요소망 형성 전략은 복잡한 동적 및 비선형 해석에 일반적으로 적용될 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 봄 학술발표회 논문집
• /
• pp.53-58
• /
• 1990

This study was intended to provide efficient algorithms for high quality postprocess on the basis of microcomputers with limited capacity and functionality. Improved methods of postprocessing including stress contouring, internal force diagraming, and displacement animation, were proposed and implemented into a new finite element system. Visualization of three-dimensional structural behaviors was treated with special emphasis.

• Structural Engineering and Mechanics
• /
• 제4권5호
• /
• pp.513-527
• /
• 1996

In this paper, both an approximate expression and an exact expression for the contribution factor of an element to the natural frequency of the finite element discretized system of a structure in general and a membrane in particular have been derived from the energy conservation principle and the finite element formulation of structural eigenvalue problems. The approximate expression for the contribution factor of an element is used to predict and determine the elements to be removed in an iteration since it depends only on the quantities associated with the old system in the iteration. The exact expression for the contribution factor of an element makes it possible to check whether the element is correctly removed at the end of an iteration because it depends on both the old system and the new system in the iteration. Thus, the combined use of the approximate expression and the exact expression allows a considerable number of elements to be removed in a single iteration so that the efficiency of the evolutionary structural optimization method can be greatly improved for solving the natural frequency optimization problem of a structure. A square membrane with different boundary supports has been chosen to investigate the general evolutionary path for the fundamental natural frequency of the structure. The related results indicated that if the objective of a structural optimization is to raise the fundamental natural frequency of the structure to an optimal value, the general evolutionary path during its optimization is that the elements are gradually removed along the direction from the area surrounded by the contour of the highest value to that surrounded by the contour of the lowest value.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.8-15
• /
• 1995

This analytical study was carried out to make quality and productivity up in designing the frame-type furniture with semi-rigid joint by understanding the mechanical and structural behavior of the joint and by evaluating the validity of application of the time-saving Finite Element Method to its structural analysis. Slope deflection equation for rigid joint was modified to describe the moment-rotation behavior of semi-rigid joint and the joint stiffness factor(Z) could be calculated to lessen the experimental expense. It was proved that Finite Element Analysis with imaginary elements having equivalent MOE to the semi-rigid joint could be the alternative method for the structural analysis of the frame-type furniture, comparing the internal rotation of the 2-dimensional beam-to-column model with two-pin(wooden dowel) from the finite element method with other available theoretical and experimental rotation value.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.609-616
• /
• 1998

Structural analyses are preformed for the high pressure steam turbine casings of the nuclear and the fossil power plants. An axisymmetric boundary element program for analysis of the casings is developed and applied in the process of practical structural design. To show the useful-ness and accuracy of the developed program results of the analysis are compared with those of the finite element analysis under hydrostatic test pressure, To check the validity of the axisymmetric numerical analysis of the casings the stresses resulting from the hydrostatic test pressure are measured using the strain gate. The results of the numerical analyses are compared and discussed with those of the experiments.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.13-18
• /
• 2013

Most ships and offshore structures are equipped with a variety of pipes, which inevitably contain curved portions. The structural design of these pipes mostly relies on the commercial code, CAESAR-II, which was especially developed for the structural analysis of pipes. This study conducted stress analyses of the same pipe unit, including loops, using both CAESAR-II and MSC/NASTRAN, and compared the results to investigate the characteristics of CAESAR-II. A parametric study was then conducted of the various design variables of pipe loops using CAESAR-II to draw some useful information about the structural characteristics of the loops.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.1-9
• /
• 2012

PURPOSES: A viscoelastic axisymmetric finite element analysis code has been developed for stress analysis of asphalt pavement structures. METHODS: Generalized Maxwell Model (GMM) and 4-node isoparametric element were employed for finite element formulation. The code was developed using $C^{+}^{+}$ computer program language and named as KICTPAVE. For the verification of the developed code, a structural model of a pavement system was constructed. The structural model was composed of three layers: asphalt layer, crushed stone layer, and soil subgrade. Two types of analysis were considered for the verification: (1)elastic static analysis, (2)viscoelastic time-dependent analysis. For the elastic static analysis, linear elastic material model was assigned to all the layers, and a static load was applied to the structural model. For the viscoelastic time-dependent analysis, GMM and linear elastic material model were assigned to the asphalt layer and all the other layers respectively, and a cyclic loading condition was applied to the structural model. RESULTS: The stresses and deformations from KICTPAVE were compared with those from ABAQUS. The analysis results obtained from the two codes showed good agreement in time-dependent response of the element under the loading area as well as the surface deformation of asphalt layer, and horizontal and vertical stresses along the axisymmetric axis. CONCLUSIONS: The validity of KICTPAVE was confirmed by showing the agreement of the analysis results from the two codes.

• 한국방재학회 논문집
• /
• 제9권1호
• /
• pp.9-13
• /
• 2009

본 연구는 적응적 요소망을 사용한 유한요소법으로 해석된 2차원 문제를 전산을 활용한 구조공학 교육의 중요한 부분으로 활용하는 대요를 제시한다. 적응적 요소망 형성방법에서는 비교적 간단한 요소의 대표 변형률 값을 사용하였고 유한요소법으로는 광범위하게 활용되고 있는 변위법을 사용하였다. 적용한 예제는 기본 역학의 대표적인 문제인 집중 하중을 받는 캔틸레버보와 중앙에 원형 구멍을 갖은 평판 인장 문제이다. 교육 대요와 예제는 적응적 요소망을 사용한 유한요소법이 전산을 활용한 구조공학 교육에 중요한 부분이 될 수 있는 것을 보여준다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.754-760
• /
• 2004

Structural analysis and tests were conducted for a carbody manufactured by aluminum alloy. The results were compared, and structural safety was evaluated based on the results. Aluminum carbody in Kwangju turned out safe in terms of structural Strength.