• 센서학회지
• /
• 제24권4호
• /
• pp.219-223
• /
• 2015

Indium free consisting of three alternating layers GTO/Ag/GTO has been fabricated by radio-frequency (RF) sputtering for the applications as transparent conducting electrodes and the structural, electrical and optical properties of the gallium tin oxide (GTO) films were carefully studied. The gallium tin oxide thin films deposited at room temperature are found to have an amorphous structure. Hall Effect measurements show a strong influence on the conductivity type where it changed from n-type to p-type at $700^{\circ}C$. GTO/Ag/GTO multilayer structured electrode with a few nm of Ag layer embedded is fabricated and show the optical transmittance of 86.48% in the visible range (${\lambda}$ = 380~770 nm) and quite low electrical resistivity of ${\sim}10^{-5}{\Omega}cm$. The resultant power conversion efficiency of 2.60% of the multilayer based OPV (GAG) is lower than that of the reference commercial ITO. GTO/Ag/GTO multilayer is a promising transparent conducting electrode material due to its low resistivity, high transmittance, low temperature deposition and low cost components.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.408-412
• /
• 2008

FLOWERING LOCUS T (FT) and TERMINAL FLOWER 1 (TFL1) in Arabidopsis are homologous proteins that perform opposite functions: FT is an activator of flowering, and TFL1 is a repressor. It was shown before that change of a single amino acid (His88) of TFL1 to the corresponding amino acid (Tyr) of FT is enough to convert the floral repressor to an activator. However, structural basis of the functional conversion has not been understood. In our molecular dynamics simulations on modified TFL1 proteins, a hydrogen bond present in native TFL1 between the His88 residue and a residue (Asp144) in a neighboring external loop became broken by change of His88 to Tyr. This breakage induced conformational change of the external loop whose structure was previously reported to be another key functional determinant. These findings reveal that the two important factors determining the functional specificities of the floral regulators, the key amino acid (His88) and the external loop, are correlated, and the key amino acid determines the functional specificity indirectly by affecting the conformation of the external loop.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.125-137
• /
• 2011

본 연구에서는 1주기와 2 주기 모두 의료기관평가 대상이 된 병원의 Malmquist 지수를 구하고 지수변동의 원인을 분석하였다. 그 결과 평가대상이 된 병원의 Malmquist 방식에 의한 생산성 향상이 이루어졌음을 발견할 수 있었다. 의료기관평가점수와 생산성 변동과의 관계를 살펴본 결과 진료 및 운영체계 점수가 부문별성과 점수에 비해 높은 설명력을 가지고 있었다. 또한 생산성 향상이 큰 병원일수록 환산지수 하락 폭도 큰 것으로 나타났으며 이러한 결과는 병원의 종별, 그룹별, 지역별 모수 요인과도 독립적인 것으로 나타났다. 생산성 변동 폭이 큰 병원일수록 환산지수 하락 폭이 더 큰 것으로 나타나 수가계약의 한 요소로 생산성지표를 도입할 수 있는 가능성을 알 수 있었다. 이러한 결과는 정태적 효율성 보다는 다기간 생산성 변동을 반영한 환산지수 추정 모형과 지불제도 개편 시 다연도성과를 반영하는 메카니즘 개발이 검토되어야 한다는 점을 의미한다.

• 한국방사선학회논문지
• /
• 제3권1호
• /
• pp.5-9
• /
• 2009

디지털 방사선 검출기의 주된 연구동향은 영상의 해상도 향상, 대면적화, 동영상 구현 등${\cdots}$ 이라 할 수 있다. 이런 연구는 방사선 변환과정에 따라 크게 직접변환 방식과 간접 변환 방식으로 나눌 수 있으며 각각 고유한 장단점을 내포하고 있다. 간접변환 방식의 경우 형광체의 사용으로 인한 Light scattering 문제로 해상력의 저하 그리고 직접방식의 경우는 낮은 system 안정성과 동영상 구현의 어려움 등이 대표적이라 할 수 있다. 이런 문제를 해결하기 위한 연구로써 액정을 이용한 엑스선 검출기 연구가 진행되었으나 그 구조의 특성상 균일한 액정의 주입이 어려워 제작에 있어 많은 어려움이 있다. 따라서 본 논문에서는 기존의 문제점을 해결할 수 있는 구조를 제안하고 이를 Simulation 통해 제안된 구조의 가능성을 검토해 보았다.

• 산경연구논집
• /
• 제13권4호
• /
• pp.35-49
• /
• 2022

Purpose - According to the recently changing consumer smart environment and consumer decision-making process, this study investigates the structural relationship between electronic(online) WOM information characteristics and brand community experience value types on specific brand reliability and brand transformation. In particular, the characteristics of word of mouth information and the experience value of brand community users were divided into detailed fac tors and approached. Methodology - In order to proceed with this study, we review previous studies and setting hypotheses. The hypothesis was verified through a survey that was conducted for the consumers with online consumption activities in less than six months. With reference to previous studies, operational definition was made for the questionnaire design. In order to verify the hypothesis, 282 people were statistically analyzed through the survey This data were used for AMOS for confirm hypothesis established. Results - eWOM information characteristics were classified into usefulness, timeliness and un-bias, and online community experience values were classified into interaction, playfulness, and virtuality. In addition, it is to investigate the relationship between the brand reliability and user's experience value in brad community. The main results are as follows. The first result was that usefulness and un-bias, which are the eWOM information characteristics had a positive effect on forming brand reliability. However, the factor of timeliness did not affect brand reliability. Second, in terms of user experience value and brand reliability in the brand community. It was fo und that experience values such as interaction, playfulness, and vituality all had a positive influence on brand reliability. Third, it was found that brand reliability has a positive influence on the on-line conversion activity of users. Conclusions - Through this study, the field of online consumer behavior research is expanding, and this study suggested that careful management is necessary according to the type or characteristics of eWOM information. Additionally, it presents the importance of the user's empirical value in the brand community influencing brand attitude and reliability. In practice, the implementation of the marketing communication mix in digital marketing has recently been underway to enhance the conversion behavior of users. At this level, it also reveals the preceding factors that increase user conversion behavior.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.63-70
• /
• 2007

Analogy in problem solving is similarity-based reasoning facilitated by verbal and visual operation. This similarity-based reasoning generally supports initial phase of idea search. Therefore, this study intends to infer the types of problem solving by tracing the analogy use of verbal and visual representation through a experimental research. According to the result of this research, the types of problem solving by analogy are classified into 'evolving', 'divergent', and 'poor conversion' type. Firstly, 'evolving type' is distinguished between 'combination type' associated different contents to develope a new design and 'transformation type' associated similar words and sketches to be continuously revised and developed. In these types usually structural analogy rather than surface analogy is used. Secondly, in 'divergent type' associated words or sketches are individually represented, and among them one design solution is selected. In this type usually surface analogy is used. Thirdly, in 'poor conversion type' interaction between verbal representation and visual representation does not go on smoothly, and the generation of idea is poor. In here surface analogy is mostly used. These findings could form the basis of skill development of idea generation and conversion in design education.

• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.313-319
• /
• 2014

This study was performed to obtain high conversion efficiency of $NH_3$ and minimize generation of nitrogen oxides using metal-supported catalyst with Ag : Cu ratio. Through structural analysis of the prepared catalyst with Ag : Cu ratio ((10-x)Ag-xCu ($0{\leq}x{\leq}6$)), it was confirmed that the specific surface area was decrease with increasing metal content. A prepared catalysts showed Type II adsorption isotherms regardless of the ratio Ag : Cu of metal content, and crystalline phase of $Ag_2O$, CuO and $CuAl_2O$ was observed by XRD analysis. In the low temperature($150{\sim}200^{\circ}C$), a conversion efficiency of AC_10 recorded the highest(98%), whereas AC_5 (Ag : Cu = 5 : 5) also showed good conversion efficiency(93.8%). However, in the high temperature range, the amounts of by-products(NO, $NO_2$) formed with AC_5 was lower than that of AC_10. From these results, It is concluded that AC_5 is more environmentally and economically suitable.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권9호
• /
• pp.930-937
• /
• 1997

Polycrystalline CdTe thin films have been studied for photovoltaic application because of their high absorption coefficient and optimal band energy(1.45 eV) for solar energy conversion. In this study CdTe thin films were deposited on CdS(chemical bath deposition)/ITO(indium tin oxide) substrate by rf-magnetron sputtering under various conditions. Structural optical and electrical properties are investigated with XRD UV-Visible spectrophotometer SEM and solar simulator respectively. The fabricated CdTe/CdS solar cell exhibited open circuit voltage( $V_{oc}$ ) of 610 mV short circuit current density( $J_{sc}$ ) of 17.2 mA/c $m^2$and conversion efficiency of about 5% at optimal sputtering conditions.

• 한국정보과학회논문지:데이타베이스
• /
• 제32권6호
• /
• pp.593-602
• /
• 2005

웹의 급속한 발전과 함께 웹 정보 자원을 보다 정확하게 이해할 수 있는 시멘틱 웹에 대한 필요성이 증가하고 있다. 현재 이와 관련된 두 가지 표준이 존재하는데 하나는 ISO/IEC JTC 1 표준인 토픽맵(Topic map)이고, 다른 하나는 W3C 표준인 RDF(Resource description framework)이다. 그러나 시멘틱 웹은 토픽맵을 적용한 정보자원과 RDF를 적용한 정보자원을 모두 인식할 수 있어야 하므로 토픽맵과 RDF간의 상호운용성이 요구된다. 이를 위해 토픽맵과 RDF간에 상호운용성 문제를 해결하기 위한 여러 변환 방법들이 제안되어 왔다. 그러나 기존의 방법들은 의미의 손실, 복잡한 구조, 불필요한 노드의 추가 등과 같은 문제점을 지니고 있었다. 이 논문에서는 이러한 문제를 해결하기 위한 새로운 방법인 NOWL (NO structural Warp and semantics Loss)을 제안한다. 제안한 방법은 기존 방법에 비해 토픽맵 본래의 의미 구조를 유지하고 불필요한 노드의 생성을 제거하는 등 여러 가지 장점을 지닌다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.88-89
• /
• 2002

The aims of this study is to realize the structural design for development of a medium scale E-glass/epoxy composite wind turbine blade for a 750KW class horizontal axis wind turbine system. In this study, the various load cases specified by the IEC61400-1 international specification and GL Regulations for the wind energy conversion system were considered, and a specific composite structure configuration which can effectively endure various loads such as aerodynamic and centrifugal loads, loads due to accumulation of ice, hygro-thermal and mechanical loads was proposed. In order to evaluate the structure, the structural analysis for the composite wind turbine blade were peformed using tile finite element method(FEM). In the structural design, the acceptable blade structural configuration was determined through the parametric studies, and the most dominant design parameters were confirmed. In the stress analysis using the FEM, it was confirmed that the blade structure was safe and stable in any various load cases Moreover the safety of the blade root joint with insert bolts, newly devised in this study, was checked against the design fond and the fatigue.