• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.219-223
• /
• 2015

Indium free consisting of three alternating layers GTO/Ag/GTO has been fabricated by radio-frequency (RF) sputtering for the applications as transparent conducting electrodes and the structural, electrical and optical properties of the gallium tin oxide (GTO) films were carefully studied. The gallium tin oxide thin films deposited at room temperature are found to have an amorphous structure. Hall Effect measurements show a strong influence on the conductivity type where it changed from n-type to p-type at $700^{\circ}C$. GTO/Ag/GTO multilayer structured electrode with a few nm of Ag layer embedded is fabricated and show the optical transmittance of 86.48% in the visible range (${\lambda}$ = 380~770 nm) and quite low electrical resistivity of ${\sim}10^{-5}{\Omega}cm$. The resultant power conversion efficiency of 2.60% of the multilayer based OPV (GAG) is lower than that of the reference commercial ITO. GTO/Ag/GTO multilayer is a promising transparent conducting electrode material due to its low resistivity, high transmittance, low temperature deposition and low cost components.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.408-412
• /
• 2008

FLOWERING LOCUS T (FT) and TERMINAL FLOWER 1 (TFL1) in Arabidopsis are homologous proteins that perform opposite functions: FT is an activator of flowering, and TFL1 is a repressor. It was shown before that change of a single amino acid (His88) of TFL1 to the corresponding amino acid (Tyr) of FT is enough to convert the floral repressor to an activator. However, structural basis of the functional conversion has not been understood. In our molecular dynamics simulations on modified TFL1 proteins, a hydrogen bond present in native TFL1 between the His88 residue and a residue (Asp144) in a neighboring external loop became broken by change of His88 to Tyr. This breakage induced conformational change of the external loop whose structure was previously reported to be another key functional determinant. These findings reveal that the two important factors determining the functional specificities of the floral regulators, the key amino acid (His88) and the external loop, are correlated, and the key amino acid determines the functional specificity indirectly by affecting the conformation of the external loop.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.125-137
• /
• 2011

This study aims to know whether the Accreditation of Hospitals can help to improve productivity of hospital and affect the conversion factor. Based on the Malmquist productivity Index, the productivity of accredited hospital improves. There exists an tendency that as the scores of Accreditation rises, productivity increases. Also the higher the productivity, the lower the conversion factors in the rigid statistical evidence. This evidence is independent of hospital classification, geographical distribution, grouping. This evidence supports the productivity index can be included in the fee negotiations. It also means that rather than static efficiency, the multi-year change of productivity information can be usefully combined to set a conversion factor in Korean National Insurance Contract especially in the discussion of the structural change of payment system.

• Journal of the Korean Society of Radiology
• /
• v.3 no.1
• /
• pp.5-9
• /
• 2009

The trend of Digital x-ray Detector research is to improve resolution of image and to embody large area imaging as well as dynamic moving imaging, etc. This research is divided with indirect conversion method and direct conversion method by radiation conversion process. Each conversion method has problems such as decrease of resolution from light scattering in indirect method case and not only low system stability but also difficult in dynamic moving imaging in direct method case. X-ray detector using liquid crystal has been researching to solve these problems, but it is difficulty in uniform injection of liquid crystal because of its structural properties. Therefore, this study suggests the structure which solves present problem. Also the possibility of suggested structure was investigated using simulation.

• The Journal of Industrial Distribution & Business
• /
• v.13 no.4
• /
• pp.35-49
• /
• 2022

Purpose - According to the recently changing consumer smart environment and consumer decision-making process, this study investigates the structural relationship between electronic(online) WOM information characteristics and brand community experience value types on specific brand reliability and brand transformation. In particular, the characteristics of word of mouth information and the experience value of brand community users were divided into detailed fac tors and approached. Methodology - In order to proceed with this study, we review previous studies and setting hypotheses. The hypothesis was verified through a survey that was conducted for the consumers with online consumption activities in less than six months. With reference to previous studies, operational definition was made for the questionnaire design. In order to verify the hypothesis, 282 people were statistically analyzed through the survey This data were used for AMOS for confirm hypothesis established. Results - eWOM information characteristics were classified into usefulness, timeliness and un-bias, and online community experience values were classified into interaction, playfulness, and virtuality. In addition, it is to investigate the relationship between the brand reliability and user's experience value in brad community. The main results are as follows. The first result was that usefulness and un-bias, which are the eWOM information characteristics had a positive effect on forming brand reliability. However, the factor of timeliness did not affect brand reliability. Second, in terms of user experience value and brand reliability in the brand community. It was fo und that experience values such as interaction, playfulness, and vituality all had a positive influence on brand reliability. Third, it was found that brand reliability has a positive influence on the on-line conversion activity of users. Conclusions - Through this study, the field of online consumer behavior research is expanding, and this study suggested that careful management is necessary according to the type or characteristics of eWOM information. Additionally, it presents the importance of the user's empirical value in the brand community influencing brand attitude and reliability. In practice, the implementation of the marketing communication mix in digital marketing has recently been underway to enhance the conversion behavior of users. At this level, it also reveals the preceding factors that increase user conversion behavior.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.63-70
• /
• 2007

Analogy in problem solving is similarity-based reasoning facilitated by verbal and visual operation. This similarity-based reasoning generally supports initial phase of idea search. Therefore, this study intends to infer the types of problem solving by tracing the analogy use of verbal and visual representation through a experimental research. According to the result of this research, the types of problem solving by analogy are classified into 'evolving', 'divergent', and 'poor conversion' type. Firstly, 'evolving type' is distinguished between 'combination type' associated different contents to develope a new design and 'transformation type' associated similar words and sketches to be continuously revised and developed. In these types usually structural analogy rather than surface analogy is used. Secondly, in 'divergent type' associated words or sketches are individually represented, and among them one design solution is selected. In this type usually surface analogy is used. Thirdly, in 'poor conversion type' interaction between verbal representation and visual representation does not go on smoothly, and the generation of idea is poor. In here surface analogy is mostly used. These findings could form the basis of skill development of idea generation and conversion in design education.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.313-319
• /
• 2014

This study was performed to obtain high conversion efficiency of $NH_3$ and minimize generation of nitrogen oxides using metal-supported catalyst with Ag : Cu ratio. Through structural analysis of the prepared catalyst with Ag : Cu ratio ((10-x)Ag-xCu ($0{\leq}x{\leq}6$)), it was confirmed that the specific surface area was decrease with increasing metal content. A prepared catalysts showed Type II adsorption isotherms regardless of the ratio Ag : Cu of metal content, and crystalline phase of $Ag_2O$, CuO and $CuAl_2O$ was observed by XRD analysis. In the low temperature($150{\sim}200^{\circ}C$), a conversion efficiency of AC_10 recorded the highest(98%), whereas AC_5 (Ag : Cu = 5 : 5) also showed good conversion efficiency(93.8%). However, in the high temperature range, the amounts of by-products(NO, $NO_2$) formed with AC_5 was lower than that of AC_10. From these results, It is concluded that AC_5 is more environmentally and economically suitable.

• Electrical & Electronic Materials
• /
• v.10 no.9
• /
• pp.930-937
• /
• 1997

Polycrystalline CdTe thin films have been studied for photovoltaic application because of their high absorption coefficient and optimal band energy(1.45 eV) for solar energy conversion. In this study CdTe thin films were deposited on CdS(chemical bath deposition)/ITO(indium tin oxide) substrate by rf-magnetron sputtering under various conditions. Structural optical and electrical properties are investigated with XRD UV-Visible spectrophotometer SEM and solar simulator respectively. The fabricated CdTe/CdS solar cell exhibited open circuit voltage( $V_{oc}$ ) of 610 mV short circuit current density( $J_{sc}$ ) of 17.2 mA/c $m^2$and conversion efficiency of about 5% at optimal sputtering conditions.

• Journal of KIISE:Databases
• /
• v.32 no.6
• /
• pp.593-602
• /
• 2005

Need for machine-understandable web (Semantic web) is increasing in order for users to exactly understand Web information resources and currently there are two main approaches to solve the problem. One is the Topic map developed by the ISO/IEC JTC 1 and the other is the RDF (Resource Description Framework), one of W3C standards. Semantic web supports all of the metadata of the Web information resources, thus the necessity of interoperability between the Topic map and the RDF is required. To address this issue, several conversion methods have been proposed. However, these methods have some problems such as loss of meanings, complicated structure, unnecessary nodes, etc. In this paper, a new method is proposed to resolve some parts of those problems. The method proposed is called NOWL (NO structural Warp and semantics Loss). NOWL method gives several contributions such as maintenance of the original a Topic map instance structure and elimination of the unnecessary nodes compared with the previous researches.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.88-89
• /
• 2002

The aims of this study is to realize the structural design for development of a medium scale E-glass/epoxy composite wind turbine blade for a 750KW class horizontal axis wind turbine system. In this study, the various load cases specified by the IEC61400-1 international specification and GL Regulations for the wind energy conversion system were considered, and a specific composite structure configuration which can effectively endure various loads such as aerodynamic and centrifugal loads, loads due to accumulation of ice, hygro-thermal and mechanical loads was proposed. In order to evaluate the structure, the structural analysis for the composite wind turbine blade were peformed using tile finite element method(FEM). In the structural design, the acceptable blade structural configuration was determined through the parametric studies, and the most dominant design parameters were confirmed. In the stress analysis using the FEM, it was confirmed that the blade structure was safe and stable in any various load cases Moreover the safety of the blade root joint with insert bolts, newly devised in this study, was checked against the design fond and the fatigue.