• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.87-93
• /
• 1995

Strontium titanate single crystal was grown by floating wne method. Growth conditions are as follows; at air atmosphere, rotation rate of upper and lower shafts were 20 - 25 rpm, 15 - 20 rpm respectively and growth rate was 3 mmlhr. As grown crystal was light brown color and transparent. After annealing, color was faded away. Growth direction was [112] direction and it was confirmed that grown crystal has $SrTiO_3$single phase and stoichiometric composition by XRD and EDS. Etch pit pattern was investigated after chemical etching in $350^{\circ}C$, KOH solution for 5 min and dielectric constant was measured at the range of room temperature ~ $350^{\circ}C$ .

• Electrical & Electronic Materials
• /
• v.9 no.4
• /
• pp.336-343
• /
• 1996

We have studied the preparation and the properties of $Ba_{1-x}$Sr$_{x}$TiO$_{3}$(BST) thin films by using the sol-gel method. Through the comparison of the effects of various solvents and additives in making solutions, we establish the production method of the stable solution which generates the high quality of BST film. We also set up the heat-treatment conditions for depositing the BST thin film through the TGA and XRD analyses. Through the comparison of the surface conditions of BST films deposited on Pt/Ta/SiO$_{2}$/Si and Pt/Ti/SiO$_{2}$/Si substrates, we find that Ta is more efficient diffusion barrier of Si than Ti so that Ta layer prevents the formation of hillocks. We fabricate the planar type capacitor and measure the dielectric properties of the BST thin film deposited on the Pt/Ta/SiO$_{2}$/Si substrate. Dielectric constant and dielectric loss tangent at 1V, 10kHz, and leakage current density at 3V of the BST thin film are 339, 0.052 and 13.3.mu.A/cm$^{2}$, respectively.ely.

• Composites Research
• /
• v.34 no.6
• /
• pp.373-379
• /
• 2021

A series of novel PBI/SrTiO₃ nanocomposite membranes composed of polybenzimidazole (PBI) and strontium titanate (SrTiO₃) with a perovskite structure were fabricated with various concentrations of SrTiO₃ through a solution casting method. Various characterization techniques such as proton nuclear magnetic resonance, thermogravimetric analysis, atomic force microscopy (AFM) and AC impedance spectroscopy were used to investigate the chemical structure, thermal, phosphate absorption and morphological properties, and proton conductivity of the fabricated nanocomposite membranes. The optimized PBI/SrTiO₃-8 polymer nanocomposite membrane containing 8wt% of SrTiO₃ showed a higher proton conductivity of 7.95 × 10^-2 S/cm at 160℃ compared to other nanocomposite membranes. The PBI/SrTiO₃-8 composite membrane also showed higher thermal stability compared to pristine PBI. In addition, the roughness change of the polymer composite membrane was also investigated by AFM. Based on these results, nanocomposite membranes based on perovskite structures are expected to be considered as potential candidates for high-temperature PEM fuel cell applications.

• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.59-64
• /
• 2010

8 mol% Y-doped $SrTiO_3$ powder was synthesized by Pechini method from titanium isopropoxide, strontium nitrate, yttrium nitrate, citric acid and ethylene glycol. A $Y_2Ti_2O_7$ pyrochlore phase-free perovskite powder was obtained by calcining a polymeric resin, which was prepared from a precursor solution, at $500^{\circ}C$ in an air atmosphere. Low temperature calcination could lead to a fine-grained microstructure. In the case of a solid-state reaction, an extended heat-treatment at high temperature in a reduced atmosphere needed to obtain a single phase perovskite $SrTiO_3$.

• Journal of information and communication convergence engineering
• /
• v.1 no.2
• /
• pp.70-73
• /
• 2003

We have studied the effects of solvents and additives in the precursor solutions on the characteristics of barium strontium titanate (BST) thin films. The solution having two solvents, ie. acetic acid for barium acetate and strontium acetate and 2-methoxyethanol for titanium isopropoxide and also having an additive of ethylene glycol shows good stability and remains homogeneous even after a month of ageing. It produces excellent BST thin film without cracks. Dielectric constant, loss tangent at 10KHz and leakage current density at 3V of the BST (70/30) thin film made from this solution are 339, 0.052 and 13.3 ${\mu}\textrm{A}$/$\texmrm{cm}^2$, respectively.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.97-101
• /
• 2000

In this study, two kinds of barium strontium titanate (BST) samples were prepared. One is a conventional BST film that is sputtered in a mixture of argon and oxygen. The other is a nitrogen-incorporated BST film that is sputtered in a mixture of oxygen and intentionally added nitrogen instead of argon gas. The structural properties of both of the BST films had not changed significantly with the species of sputtering gas. However, the leakage current of BST films sputtered at ($N_2$+O$_2$) atmosphere was lower than those sputtered at (Ar +O$_2$) atmosphere: 1.9$\times$10$^{-8}$ A/cm$^2$ at 2V for the films prepared at (Ar +O$_2$) atmosphere and 8.6$\times$10$^{-9}$ A/cm$^2$ for the films at ($N_2$+O$_2$) atmosphere. From an XPS analysis, it has been found that nitrogen atoms are incorporated in BST films with a concentration of 1.92 at% and form a certain oxynitride phase. It is proposed that nitrogen atoms are able to fill the oxygen vacancies of BST films during sputtering process, and then the leakage current reduces due to a decrease in the vacancies. The BST films sputtered at ($N_2$+O$_2$) atmosphere have superior electrical properties to the films sputtered at (Ar +O$_2$), without any significant structural changes.

• Nano
• /
• v.13 no.11
• /
• pp.1850130.1-1850130.12
• /
• 2018

A novel strontium titanate/binary metal sulfide ($SrTiO_3/SnCoS_4$) heterostructure was synthesized by a simple two-step hydrothermal method. The visible-light-driven photocatalytic performance of $SrTiO_3/SnCoS_4$ composites was evaluated in the degradation of methyl orange (MO) under visible light irradiation. The photocatalytic performance of $SrTiO_3/SnCoS_4-5%$ is much higher than that of pure $SrTiO_3$, $SnCoS_4$, $SrTiO_3/SnS_2$ and $SrTiO_3/CoS_2$. The $SrTiO_3/SnCoS_4$ composite material with 5 wt.% of $SnCoS_4$ showed the highest photocatalytic efficiency for MO degradation, and the degradation rate could reach 95% after 140 min irradiation time. The enhanced photocatalytic activity was ascribed to not only the improvement of visible light absorption efficiency, but also the construction of a heterostructure which make it possible to effectively separate photoexcited electrons and holes in the two-phase interface.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.141-144
• /
• 2011

We report the synthesis of $SrTiO_3$, $BaTiO_3$ and $Ba_xSr_{1-x}TiO_3$ (BST) nanoparticles (NPs) in various compositions (x = 0.25, 0.5 and 0.75) by an inorganic sol-gel method under a basic condition. Highly crystalline nanoparticles were formed at the reaction temperature of 25 - $100^{\circ}C$ from a stabilized titanium alkoxide in tetramethylammonium hydroxide (TMAH) and barium or strontium acetate in aqueous solution. Morphology and particle structure of the synthesized BST NPs were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The BST nanoparticles in various compositions were monodispersed without mutual aggregation, and their average sizes were in the range of 70 - 80 nm. Furthermore, they showed highly crystallized perovskite phase over the whole composition range from $SrTiO_3$ to $BaTiO_3$. We also proposed a mechanism for the low-temperature formation of BST NPs.

• Journal of the Korean Ceramic Society
• /
• v.33 no.2
• /
• pp.177-182
• /
• 1996

strontium titanate (SrTiO3) thin films deposited on Pt/MgO were prepared by Plasma Enhanced Metal Orgainc Chemical vapor Deposition (Pe-MOCVD). The crystallinity of SrTiO3 thin films increased with increasing depo-sition temperature and SrF2 second phase disappeared at 55$0^{\circ}C$ The films showed a dielectric constant of 177 and a dissipation factor of 0.0195 at 100 kHz. The variation of capacitance of the films with applied voltage was small showing paraelectric properties. The charge storage density and leakage current density were 40fC/${\mu}{\textrm}{m}$2 and 3.49$\times$10-7 A/cm2 at 0.25 MV/cm, respectively.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.115-120
• /
• 2004

Perovskite barium-strontium titanate, $(Ba, Sr)TiO_3$ was prepared and effects of $Sb_2$O$_3$ additives on its PTCR properties were investigated. $The (Ba,Sr)TiO_3$ with 0.05～0.25 mol% $Sb_2$$O_3$ showed semiconducting PTCR behavior and anomalous grain growth was also observed when it was sintered above $1330^{\circ}C$. It was considered that charge compensation by doping 8b203 as well as abnormal grain growth by sintering lead to resistivity reduction from insulating to semiconducting transition.