• 대한화학회지
• /
• 제42권1호
• /
• pp.28-35
• /
• 1998

Alga와 같은 미생물은 중금속을 흡수한다. Alga(Anabaena)로 변성시킨 탄소반죽전극으로 Cd(Ⅱ)이온을 사전농축시켜서 Cd(Ⅱ)을 양극벗김 펄스차이 전압-전류법으로 정량하였다. Cd(Ⅱ)의 산화봉우리는 -0.75V vs. SCE.에서 나타났으며, 이 봉우리를 이용하여 Cd(Ⅱ) 정량의 최적조건을 조사하였다. 변성전극의 제작에 미치는 alga양의 영향과 Cd(Ⅱ)의 사전농축에 미치는 pH와 이온세기, 온도 및 사전농축시간에 대한 영향을 조사하였으며. 전극표면에 사전 농축시킨 Cd(Ⅱ)이온을 전해환원시키는 시간과 전위의 영향도 조사하였다. Cd(Ⅱ)을 정량하기 위한 검정선은 $1.0{\times}10^6\;M ~ 8.0{\times}10^6\;M$범위에서 직선성(상관계수는0.9978)이 성립하였고 검출한계는 $5.0{\times}10^{-7}\;M$이었다. $7.0{\times}10^{-6}\;M$ Cd(Ⅱ)용액에서 얻은 상대표준편차는 3.1%(n=6)이었다. Alga변성전극의 사용횟수는 0.1M HCl 용액으로 전극표면을 재생시킬 때에 10회까지 연속측정이 가능하였다.

• 대한화학회지
• /
• 제35권2호
• /
• pp.151-157
• /
• 1991

In-HQ 착물에 대한 벗김전압전류법적 연구를 HMDE를 사용하여 0.1M 아세테이트 완충용액에서 수행하였다. 흡착된 착물의 환원피크 높이에 영향을 주는 여러 가지 분석상의 조건들에 관하여 알아보았다. 최적의 분석조건은 착화제의 농도가 $2{\times}10^{-5}$M, 용액의 pH는 4.75, 주사속도는 10mV/s, 흡착전위와 시간은 각각 -0.450V와 90초임을 알 수 있었다. 여러 다른 이온들의 방해효과와 계면활성제의 영향을 검토하였다. 본 연구에서의 검출한계는 농도 대 피크높이의 직선식으로부터 구하였을 때 90초의 흡착시간시 0.2 ppb이었으며, 4 ppb의 In을 10회 분석하였을 때 상대표준편차는 3.2%이었다.

• 대한화학회지
• /
• 제44권2호
• /
• pp.109-114
• /
• 2000

본 실험에서는 고분자 상태의 Sodium Alginate를 시차펄스 전압전류법을 이용하여 최적의 분석조전을 조사 연구하였고, 먼저 고분자 상태인 Sodium Alginate를 순환전압전류법과 IR로 환원 작용기를 확인하였다. 수은방울크기 (medium size), 수집시간(60초), 수집 전위 (-0.20V vs Ag/AgCl), 주사속도(100mV/sec), 지지전해질(0.10M $NaClO_4$, pH 6,8)의 선택 둥 최적의 분석조전을 정하였다. 그리고 고분자 상태인 Sodium Alginate와 고분자 상태의 Sodium Alginate를 $100^{\circ}C$ 산조건하에서 가수분해하여 저분자화시켰을 때, 전류봉우리 높이 변화를 비교 분석하였다. 위와 같은 최적조건에서 Sodium Alginate를 정량분석해 본 결과 고분자 상태의 검정곡선은 0.50ppm으로부터 4.0ppm익 범위에서, 저분자일 때는 0.05ppm에서 0.24ppm의 범위에서 선형적이었다.

• 대한화장품학회지
• /
• 제35권4호
• /
• pp.325-331
• /
• 2009

스킨로션에 함유된 루틴을 정량하기 위하여 사각파형 전압전류법에서 흑연을 작업 전극으로 사용하여 연구하였다. 루틴을 정량하기 위한 최적 분석 조건을 찾았고 이 조건에서 $1.00\;{\sim}\;8.00\;{\mu}g/mL$의 농도에 대한 루틴의 검량선을 나타내었다. $0.10\;{\mu}g/mL$의 루틴 농도에서 15번 반복 측정한 상대 표준편차는 0.08이였으며, 최소 분석 검출 한계는 $0.01\;{\mu}g/mL$로 나타났다. 이 결과들을 바탕으로 화장품에 함유되어 있는 활성성분을 정량하는데 사용가능할 것으로 사료된다.

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.302-310
• /
• 2012

Bio assay of mercury and cadmium ions were searched using voltammetric analysis using DNA doped carbon nanotube paste electrodes (DCP). The square-wave stripping voltammetryic optimized results indicated working ranges of 1-10.0 $ngL^{-1}$ and 20-100 $ugL^{-1}$, Hg(II) Cd(II) within an accumulation time of 120 seconds, in 0.1-M phosphate buffer solutions of pH 6.3. The relative standard deviations of 5 $ngL^{-1}$ Hg(II) and Cd(II) that observed were 0.14 and 0.22% (n=12), respectively, using optimum conditions. The low detection limit (S/N) was pegged at 0.1 $ngL^{-1}$ ($4.9{\times}10^{-11}M$) Hg(II) and 0.2 $ngL^{-1}$ ($1.77{\times}10^{-10}M$) Cd(II). The developed methods can be applied to assays in biological fish kidneys and water samples.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2442-2444
• /
• 2007

CO adsorbates on the surface of Pt supported on carbon catalysts (Pt/C) were investigated by CO stripping voltammetry. Three types of CO adsorbed samples were prepared: by methanol dehydrogenation only (COm), by CO gas bubbling only (COg), and by methanol dehydrogenation followed by CO gas bubbling (COm+g). Our coverage data show that CO gas can be adsorbed on Pt/C catalyst already saturated with CO adsorbates by methanol dehydrogenation. The COm+g sample showed the properties of both COm as well as COg samples in terms of the potential although the CO adsorbed by dehydrogenation was completely exchanged with CO in the electrolyte solution. Therefore, the oxidation pathways of CO on Pt/C were observed to depend on the initial adsorption conditions of CO more strongly than on the CO coverage. Our results imply that an initial CO poisoning condition in fuel cell operation is an important factor to determine the difficulty in removing the adsorbed CO and confirm that the properties of the adsorbed CO do not change even with chemical replacement with CO in different conditions. In addition, our results indicate a low CO surface mobility on the Pt in an electrolyte solution.

• Carbon letters
• /
• 제20권
• /
• pp.47-52
• /
• 2016

Physical and electrochemical qualities were analyzed after KOH activation of a direct methanol fuel cell using needle coke as anode supporter. The results of research on support loaded with platinum-ruthenium suggest that an activated KOH needle coke container has the lowest onset potential and the highest degree of catalyst activity among all commercial catalysts. Through an analysis of the CO stripping voltammetry, we found that KOH activated catalysis showed a 21% higher electrochemical active surface area (ECSA), with a value of 31.37 m² /g, than the ECSA of deactivated catalyst (25.82 m² /g). The latter figure was 15% higher than the value of one specific commercial catalyst (TEC86E86).

• Journal of Electrochemical Science and Technology
• /
• 제4권4호
• /
• pp.140-145
• /
• 2013

This study describes the electrodeposition of $Cu_2Se$ thin films with a two-step approach that is based on the initial modification of polycrystalline Au electrode with a selenium overlayer followed by a cathodic stripping of the layer as $Se^{2-}$ in a 1 M lactic acid electrolyte containing $Cu^{2+}$ ions. For this two-step approach to be effective, the $Cu^{2+}$ reduction potential should be shifted to more negative potentials passed potentials for the reduction of Se to $Se^{2-}$. This was accomplished by the complexation of $Cu^{2+}$ ions with lactic acid. The resultant $Cu_2Se$ films were characterized by linear sweep voltammetry combined with electrochemical quartz crystal microgravimetry, UV-vis absorption spectrometry and Raman spectroscopy. Photoelectrochemical experiments revealed that $Cu_2Se$ synthesized thus, behaved as a p-type semiconductor.

• Toxicological Research
• /
• 제31권2호
• /
• pp.213-217
• /
• 2015

A voltammetric toxic metal of cadmium detection was studied using a fluorine doped graphite pencil electrode (FPE) in a seawater electrolyte. In this study, square wave (SW) stripping and chronoamerometry were used for determination of Cd(II) in seawater. Affordable pencils and an auxiliary electrode were used as reference. All experiments in this study could be performed at reasonable cost by using graphite pencil. The application was performed on the tissue of contaminated soil earthworm. The results show that the method can be applicable for vegetables and in vivo fluid or medicinal diagnosis.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.140-145
• /
• 2010

The simultaneous detection of Cd (II), Pb (II), Cu (II), and Hg (II) ions in aqueous medium using a BDD electrode with DPASV is described. XPS was used to characterize the chemical states of trace metal ions deposited on the BDD electrode surface. Experimental parameters that affect response, such as pH, deposition time, deposition potential, and pulse amplitude were carefully optimized. The detection limits for Cd (II), Pb (II), Cu (II), and Hg (II) ions were 3.5 ppb, 2.0 ppb, 0.1 ppb and 0.7 ppb, respectively. The application of the BDD electrode on the electrochemical pretreatment for the simultaneous metal detection in the dye waste water was also investigated.