• 한국농공학회지
• /
• 제32권E호
• /
• pp.67-73
• /
• 1990

Many distress mechanisms in pavement are known to be caused by the poor mechanical properties of bituminous concretes. Among many mechanical properties, tensile strength is one of the more important indicates that represent the resistance of pavement to traffic loading. However, there has been no relationship established between the strength and distress mechanisms. Therefore, this study was conducted to evaluate a correlation between the tensile strength value and the intensity of distress in bituminous concrete. Distress data were collected from an extensive field investigation over 77km of a four-lane highway in South Carolina, USA, and from laboratory prepared specimens in two phases of study. Strength data were obtained from a total of more than 400 field cores taken from the same highway and from 640marshall specimens of surface course mixture prepared in the laboratory. These data were analyzed using statistical test techniques. It was found from statistical analyses that the tensile strength of bituminous concrete had a strong relation with the pavement condition in the field. In the analysis of rutting and stripping, low strength concrete showed a higher distress rate in the mixture, and mixtures under distress in the field showed obviously reduced strength values. Stripping was found to be the most significant distress mechanism that was correlated with low strength bituminous concrete. Rutting appeared more frequently in a low strength pavement section of the highway as a sign of failure due to traffic loading.

• Journal of Oral Medicine and Pain
• /
• 제32권4호
• /
• pp.347-355
• /
• 2007

본 연구는, 양극 벗김 전압전류법 (Anodic stripping voltammetry: ASV)을 이용하여, 전처리 과정 (pre-treatment procedure)에 따른 인체 타액내 납 (Pb)과 카드뮴 (Cd)의 검출농도의 차이를 비교하기 위하여 시행되었다. 납과 카드뮴에 노출되지 않을 것으로 추정되는 남녀 10명을 대상으로, 비자극성 전타액을 채취한 후, 각 시료를 6개의 시편으로 나누어서 원심분리를 시행한 후 3가지 전처리를 하는 경우와 원심분리를 시행하지 않고 3가지 전처리를 하는 경우로 구분하였다. 타액의 전처리법은 simple dilution by electrolyte, simple dilution by HCl, acid digestion by nitric acid 등 3가지를 각각 시행했으며, ASV법으로 타액 내 납과 카드뮴의 농도를 분석하였다. 실험결과는 다음과 같다. 1. '타액 시료의 전처리 방법에 따른 타액내 납의 평균 농도'를 살펴보면, 원심분리 시행군이 원심분리 미시행군에 비하여 평균농도가 유의성 있게 높았다. 2. 타액내 납의 검출에 있어서, 단순히 전해질로 희석만 한 경우보다 염산이나 질산으로 전처리를 시행한 경우에 유의성 있게 더 높은 농도를 나타내었다. 3. '타액 시료의 전처리 방법에 따른 타액내 카드뮴의 평균 농도'를 살펴보면, 원심분리 시행군이 원심분리 미시행군에 비하여 평균농도가 유의성 있게 높았다. 4. 타액내 카드뮴의 검출에 있어서, 단순히 전해질로 희석만 한 경우보다 염산이나 질산으로 전처리를 시행한 경우가 더 높은 농도를 나타내었으나, 유의한 차이는 아니었다.

• 자원리싸이클링
• /
• 제22권4호
• /
• pp.81-90
• /
• 2013

1990년대 이후 정보통신산업의 급속한 발전으로 반도체 및 LCD의 수요가 지속적으로 증가하고 있다. 이에 따라 미세회로 패턴형성에 핵심이 되는 감광제와 이의 희석 제거에 사용되는 고가의 시너, 박리액의 수요가 급격히 증가하고 있어, 폐시너, 폐박리액에 대한 재활용 필요성이 대두되고 있는 실정이다. 최근 경제적인 측면과 환경적인 측면, 효율성에 관한 측면에서 스트리핑 공정폐액의 재활용 기술이 폭넓게 연구되고 있다. 본 연구에서는 스트리핑 공정폐액의 재활용 기술에 대한 특허와 논문을 분석하였다. 분석범위는 1981년~2010년까지의 미국, 유럽연합, 일본, 한국의 등록/공개된 특허와 SCI 논문으로 제한하였다. 특허와 논문은 키워드를 사용하여 수집하였고, 기술의 정의에 의해 필터링 하였다. 특허와 논문의 동향은 연도, 국가, 기업, 기술에 따라 분석하여 나타내 보았다.

• 자원리싸이클링
• /
• 제23권5호
• /
• pp.21-27
• /
• 2014

리튬함유 폐액에서 $D_2EHPA$를 추출제로 사용하여 용매추출법에 의해 리튬의 회수에 관한 연구를 실시하였다. 수용액상의 pH, 추출제 농도 및 상비 변화 등 리튬의 추출에 영향을 미칠 수 있는 인자들에 대한 실험을 실시하였다. 실험 결과, 평형 pH가 증가할수록 리튬의 추출율이 증가하였고, pH 6.0에서 20% $D_2EHPA$에 의해 최대 50%의 리튬 추출율을 보였다. McCabe-Thiele diagram 분석으로 부터 리튬은 상비(O/A) 3.0에서 4단으로 95%이상 추출이 가능하였다. 한편 탈거액으로 황산을 사용하였고, 리튬 탈거의 최적 황산 농도는 90 ~ 120 g/L 이었다. 연속탈거 공정을 통하여 리튬이 11.85 g/L까지 농축 가능하였으며, 이 용액으로 부터 침전법에 의해 탄산리튬의 제조가 가능하였다.

• Journal of Electrochemical Science and Technology
• /
• 제9권4호
• /
• pp.276-281
• /
• 2018

High concentration of copper in mezcal, a representative Mexican spirituous alcoholic beverage, is a serious problem due to the damage that it may cause to human health. A cyclic voltammetry and square wave anodic stripping voltammetry study of copper (II) in three commercial mezcal samples based on glassy carbon electrode response was undertaken. The analysis was developed using a simulated matrix solution ($EtOH/H_2O$ (1:1), 0.1 M $LiClO_4$ and AcOH/AcONa 0.05 M/0.008 M), with Cu (II) concentrations in the range 0 - 1 ppm. Direct electrochemical analysis of mezcal samples was complicated by the presence of different organic compounds in the matrix. The analytical signal of Cu (II) in the spirituous was notably improved and the interferences caused by organic compounds were minimized, by diluting the mezcal samples 10% with $EtOH/H_2O$ (1:1) solution. An efficient quantification of Cu (II) was obtained from the calibration curve by the SWASV and using the internal standard method (Cd (II)) in commercial samples (1.2-6.7 ppm); the results were correlated satisfactorily with the values obtained by AAS.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.87-95
• /
• 2017

PURPOSES : The objectives of this study are to evaluate moisture sensitivity of various asphalt mixtures and to suggest an alternate method for the dynamic immersion test, which is used to determine the application of anti-stripping agent, by analyzing bond strength. METHODS : The bond strength of various asphalt mixtures such as hot mix asphalt, warm mix asphalt, and polymer-modified asphalt was evaluated by the ABS test. In order to characterize moisture sensitivity at different temperatures of the mixtures, the ABS test was conducted at $-10^{\circ}C$, $5^{\circ}C$, $20^{\circ}C$, $40^{\circ}C$, and $54^{\circ}C$ under both dry and wet conditions. The concept of the bond strength ratio was applied for objective moisture sensitivity analysis. Moreover, the bond strength characteristic was compared to the dynamic immersion test to suggest an alternate method to determine the application of anti-stripping agent. RESULTS AND CONCLUSIONS : Overall, the polymer-modified asphalt demonstrates the highest bond strength characteristic regardless of moisture condition and temperature. The bond strength characteristic displays a highly reliable linear relationship from $5^{\circ}C$ to $40^{\circ}C$, and the relationship could be used to predict bond strength at any intermediate temperature. Based on the analysis of bond strength and retained asphalt ratio, the bond strength value of 1254 kPa could be applied as a criterion for anti-stripping agent.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.443-449
• /
• 2012

A investigation of electrochemical analysis of antibiotics Neomycin ($C_{23}H_{46}N_6O_{13}$) was searched using electrochemical square wave (SW) stripping and cyclic voltammetry (CV) using working sensor of the modified carbon nanotube combination electrodes, optimum diagnostic parameters were searched by anodic stripping, final conditions were attained to working range of 1.0-14.0 ng/L, detection limit (S/N) was found to be 0.6 ng/L. The developed method was discovered to be fitting in quality control in the food, pharmaceutical and other manufacturing sectors.

• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.595-601
• /
• 2017

In vivo assay of glucose detection was described using a skin tattoo film electrode (STF), and the probe was made from carbon nano tube paste modification film paper. Here in the square-wave stripping anodic working range obtained of $20-100mgL^{-1}$ within an accumulation time of 0 seconds only in sea water electrolyte solutions of pH 7.0. The relative standard deviations of 50 mg glucose that were observed of 0.14 % (n=12), respectively, using optimum stripping accumulation of 30 sec, the low detection limit (S/N) was pegged at 15.8 mg/L. The developed results can be applied to the detect of in vivo skin sensing in real time. Which confirms the results are usable for in vitro or vivo diagnostic clinical analysis.

• Toxicological Research
• /
• 제28권1호
• /
• pp.67-71
• /
• 2012

Trace uranium detection measurement was performed using DNA immobilized on a graphite pencil electrode(DGE). The developed probe was connected to the portable handheld voltammetric systems used for seawater analysis. The sensitive voltammogram was obtained within only 30 s accumulation time, and the anodic stripping working range was attained at 100~800 ${\mu}g/l$ U and 10~50 ${\mu}g/l$. The statistic relative standard deviation of 30.0 mg/l with the $15^{th}$ stripping was 0.2115. Here, toxicological and analytical application was performed in the seawater survey in a contaminated power plant controlling water. The results were found to be applicable for real-time toxicological assay for trace control.

• 천문학회보
• /
• 제42권1호
• /
• pp.29.3-29.3
• /
• 2017

We study the connection between the observed star formation rate-stellar mass (SFR-M) relation and the evolution of the stellar mass function (SMF) by means of a Subhalo Abundance Matching technique coupled to merger trees extracted from a N-body simulation. Our approach, which considers both galaxy mergers and stellar stripping, is to force the model to match the observed SMF at redshift z>2, and let it evolve down to the present time according to the observed (SFR-M) relation. In this study, we use two different sets of SMFs and two SFR-M relations: a simple power law and a relation with a mass-dependent slope. Our analysis shows that the evolution of the SMF is more consistent with a SFR-M relation with