• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.100-104
• /
• 2019

We have investigated the feasibility of fabricating fine stripes using needle coating for potential applications in solution-processed organic light-emitting diodes (OLEDs). To this end, we have employed an aqueous poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) solution that has been widely used as a hole injection layer (HIL) of OLEDs and performed needle coatings by varying the process parameters such as the coating gap and coating speed. As expected, the stripe width is reduced with increasing coating speed. However, the central thickness of the stripe is rather increased as the coating speed increases, which is different from other coating processes such as slot-die and blade coatings. It is due to the fact that the meniscus formed between the needle tip and the substrate varies depending sensitively on the coating speed. It is also found that the stripe width and thickness are reduced with increasing coating gap. To demonstrate its applicability to OLEDs, we have fabricated a red OLED stripe and obtained light emission with the width of about 90㎛.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.778-783
• /
• 2009

To fabricate uniform and reliable thin gold stripes that provide low-loss optical waveguides, we developed a novel liftoff process placing an additional $SiN_x$ layer under conventional photoresists. By patterning a photoresist and over-etching the $SiN_x$, the photoresist patterns become free-standing structures on a lower-cladding. This leads to uniform metal stripes with good reproducibility and effectively removes parasitic structures on the edge of the metal stripe in the image reversal photolithography process. By applying the newly developed process to polymer-based gold stripe waveguide fabrication, we improved the propagation losses about two times compared with that incurred by the conventional image-reversal process.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.2
• /
• pp.64-69
• /
• 2010

We investigated the variation in contact angle of a nano-sized water droplet on a nano stripe-patterned surface using molecular dynamics simulation. By changing the height and width of the stripe pillar, and the gap width of the stripes, we observed the contact angle of water droplet in equilibrium. When the surface energies were 0.1 and 0.3 kcal/mol, the calculated contact angles were in good agreement with the Cassie and Baxter equation. However, when the surface energy is 0.5 kcal/mol, the contact angles are observed to be perturbed along the Cassie and Baxter equation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.5
• /
• pp.1-7
• /
• 1980

In this paper, the theoretical analysis of lateral guiding in stripe geometry DH laser diode is performed. In the analysis, the carrier density profile is modeled as the function of stripe width and the beam width variations related to the stripe width are calculated using the perturbed mode theory. Finally the results of this paper are compared and analyzed with the Hakki's calculated data & kirkby's experimental data.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.60-65
• /
• 1997

This paper proposes a profilometry system for precise surface contouring of 3D objects using a direc- tionally magnified image of a laser light stripe. The resolution of this system can be improved several times comparad with that of conventional systems without loss of spatial resolution and depth of measurement. A pair of cylindrical lens(a convex lens and a concave lens) are used for a directionally magnified image of a laser light stripe maintaining the same focal plane. Also, image processing procedures for image reconstruc- tions are described.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.69-75
• /
• 2009

This research regard it as most meaningful to realize the importance of the hedgerow in cultivated areas functioning as a residual landscape element in rural landscape and set improvement guidelines through landscape character and value analysis to cope with landscape malfunction. The results of summary are as follows. 1) First of all, as a result of landscape character analysis of edge stripe in cultivated land in total of 7 case areas, for example, the edge stripe in cultivated land in case area 4 and 8 maintain the width of 10m and are assessed satisfactory in terms of vegetation development condition, appearance of living species, connectivity, buffer capacity and so on. Also, as a result of structural character of correlation analysis among items, the correlation coefficient between width and appearance of living species showed 0.941, the highest. Following are connectivity and appearance of living species and width and buffer capacity respectively: 0.841 and 0.740. 2) As a result of landscape character analysis of uncultivated stripe in total of 6 case areas, it is analyzed that case area 4 maintains the widest width as almost 4.5m average width and considered valuable as I degree in vegetation development condition, filtering, and connectivity. 3) As a result of problem analysis of uncultivated stripe, for example, case 3, 9, and 10 was analyzed that the width was below 1.25m which is too small to carry out the function of buffer and habitat for living creature, so minimum standard width was set between 4~5m through comprehensive analysis of character of each case area. Based on the result above landscape character, value and problem analysis, main improvement guidelines are set in terms of width, connectivity, filtering, and vegetation development, restrictive practices and so on.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.4
• /
• pp.145-150
• /
• 2014

GaN nanorods were grown on the apex of GaN stripes by three dimensional selective growth method. $SiO_2$ mask was partially removed only on the apex area of the GaN stripes by an optimized photolithography for the selective growth. Metallic Au was deposited only on the apex of the GaN stripes and a selective growth of GaN nanorods was followed by a metal organic vapor phase epitaxy (MOVPE). We confirmed that the shape and size of the GaN nanorods depend on growth temperature and flow rates of group III precursor. GaN nanorods were grown having a taper shape which have sharp tip and triangle-shaped cross section. From the TEM result, we confirmed that threading dislocations were rarely observed in GaN nanorods because of the very small contact area for the selective growth. Stacking faults which might be originated from a difference of the crystal facet directions between the GaN stripe and the GaN nanorods were observed in the center area of the GaN nanorods.

• Korean Journal of Organic Agriculture
• /
• v.18 no.1
• /
• pp.75-82
• /
• 2010

The purpose of this study is to investigate an occurrence rate of rice stripe virus disease under different rice transplanting time and different rice cultivars. After final harvest, the yield of rice infected by rice stripe virus was obtained on Wangchal cultivar compared to uninfected rice. The results obtained as following: 1) Yield of rice infected by rice stripe virus was decreased by 64% with reduction of culm length, pancile length, number of spike, number of spikelet, and grain filling compared to uninfected rice, 2) An occurrence rate of rice stripe virus disease under different rice planting season was high as order of May 30 > June 15 > July 1. In additional, to reduce a rice stripe virus disease on higher disease occurrence region and susceptible cultivars, rice planting season will be accepted on and after June 15, and 3) Eighteen cultivars were resistance cultivars such as Hwayeongbyeo, Onnuri, Ilmibyeo, Nampyongbyeo, Dongjin2ho, Hopumbyeo, Hwangkeumnuri, Malgeumi, Saenuri, Pungmi1ho, Haechanmulgyeo, Hwangkeumnodeul, Chilbobyeo, Dongjinbyeo, Younganbyeo, Junambyeo, Samkwangbyeo, and Nakdongbyeo. Twenty-one cultivars were susceptible cultivars such as Odaebyeo, Unkwangbyeo, Shinungbong1ho, Manabyeo, Hopyongbyeo, Borami, Damibyeo, Hwangchalbyeo, Sulgengbyeo, Nongrim6ho, Sasanishigi, Yunishigari, Chungmubyeo, Dongjin1ho, Huknambyeo, Guromy, Shanghehanghulna, Heukchalbyeo, Heukhwangbyeo, and Aranghwangchalbyeo.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.1-15
• /
• 2006

The purpose of this research is to find out the effect of clothing style and mixtures of stripe pattern direction, width, and coloration of an upper garment. The experimental materials made for this study are a set of stimuli and response scale(The 7-Point semantic). The subjects were 480 female undergraduate students in Seoul, Busan, Gyung-nam. The 80 stimuli which were variously incorporated with clothing styles and stipe patterns were assessed by the students. The following contents summarizes the results of the research. Impression factors of the stimuli consists of the 5 dimensions(Attractiveness, Show, Activity, Clearness, mildness). Amon these, the Attractiveness and Show dimensions proved to be more important. The clothing style and pattern direction indicated main effect in attractiveness and activity dimension. The pattern coloration showed a significant effect in dimensions except attractiveness and clearness. The pattern width had a significant effect only in the activity. Significant interaction effects of each clothing clause were found in the attractiveness, activity and clearness, but Show and mildness had no significant interaction effect. This research, as the 06 S/S, F/W trend, is a meaningful study in that it handled in the form of expression the stripe pattern used unrestrictedly in the casual wear or the formal wear by a fashion keyword.