• 소성∙가공
• /
• 제13권4호
• /
• pp.382-387
• /
• 2004

The continuous confined strip shearing (CCSS) based on the equal channel angular pressing (ECAP) was modeled by means of a rigid-plastic two-dimensional finite element method (FEM). Parallel to the simulations, samples of AA 1050 sheets were experimentally deformed by CCSS. The CCSS deformation led to the formation of through thickness texture gradients comprising a strong shear texture in the sheet center and weak shear textures in the sheet surfaces. FEM analysis revealed variations in the strain component $\varepsilon_13$ along the sample thickness direction, which gave rise to the evolution of different textures. A high friction between the sample and die surface was responsible for lowering intensities of the shear texture components in thickness layers close to the surfaces.

• Structural Engineering and Mechanics
• /
• 제3권1호
• /
• pp.49-60
• /
• 1995

In the present study, a finite strip method for the vibration and stability analyses of anisotropic laminated composite plates is developed according to the higher-order shear deformation theory. This theory accounts for the parabolic distribution of the transverse shear strains through the thickness of the plate and for zero transverse shear stresses on the plate surfaces. In comparison with the finite strip method based on the first-order shear deformation theory, the present method gives improved results for very thick plates while using approximately the same number of degrees of freedom. It also eliminates the need for shear correction factors in calculating the transverse shear stiffness. A number of numerical examples are presented to show the effect of aspect ratio, length-to-thickness ratio, number of plies, fibre orientation and stacking sequence on the natural frequencies and critical buckling loads of simply supported rectangular cross-ply and arbitrary angle-ply composite laminates.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.125-128
• /
• 2001

A finite element-based, integrated process model is presented for coupled analysis of the thermal and metallurgical behavior of the strip occurring on the run-out-table in hot strip rolling. The validity of the proposed model is examined through comparison with measurements. The models capability of revealing the effect of cooling pattern on strip temperatures and the optimal cooling pattern are demonstrated through a series of process simulation. In order to improve strip shape and control temperature history of thickness direction for strip during ROT cooling.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.39-43
• /
• 2002

A new model for heat transfer and thermal deformation analysis according to strip mm in coiling process has been proposed. Finite difference analyses for heat transfer of cold rolled coil have been carried out under various coiling tensions and strip crown using the equivalent thermal conductivity for the radial direction of cold rolled coil which is a function of strip thickness, surface characteristics and compressive pressure. The compressive pressure is calculated from a equation expressed as a function of hoop stress and coil tension considering strip mm obtained by experiment. Finite element method for thermal deformation of cold rolled coil has been performed to investigate the effects of the strip crown, the coil tension and temperature. From these analyses, it is found that the axial inhomogeneity of thermal deformation is increased as the strip crown, compressive pressure, and temperature drop in cold coiled strip increase.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.51-57
• /
• 2008

It is important factor to design the strip layout drawing according to product properties in press die design. Press dies are important processes in production such as a car component, house electronics, computer parts etc. In this paper, the strip layout of parts was designed for transfer dies. Results of this study can be modify the punch, trim position and notching shapes of strip layout. Utilization ratio was 70.3% by conducting piercing and notching for scrap design and materials were arranged with wide width of blank layout.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.409-414
• /
• 2017

두께가 얇은 스트립의 권취공정에서는 맨드렐과 함께 슬리브가 사용된다. 이때 스트립과 슬리브의 응력분포는 코일의 좌굴 및 슬리브의 두께 결정에 중요한 요인으로 작용한다. 하지만 스트립 권취 시 압력이 과도하게 누적됨에 따라 이를 실측하는 데에는 어려움이 있다. 이에 본 논문에서는 권취공정에 대한 유한요소모델을 수립하였다. 제안된 모델을 이용하여 슬리브의 반경, 원주방향 응력 및 스트립 층간 응력에 대해 분석하였다. 스트립 두께 변화에 따른 응력분포를 확인하였으며, 1 mm 스트립의 경우 권취 시작점에서 6.3배 큰 응력이 발생하였다. 맨드렐이 제공하는 반력에 의해 스트립 90 mm 적층 시 슬리브의 반경방향 응력이 선행이론대비 14.8 % 증가하였다.

• 제어로봇시스템학회논문지
• /
• 제2권3호
• /
• pp.134-141
• /
• 1996

In this paper, we formulate the mathematical model for a single-stand rolling mill and design control systems for the thickness control at the exit of roll stand and for the tension control of the strip in the process. We propose a thickness controller based on the Internal Model Control structure which can be an effective application when the frequency components of the thickness deviation of the entry strip are known and, show how it can be appropriately combined with BISRA AGC method for a precise thickness control while maintaining the robustness against the modeling error of the mill modulus. It is illustrated by simulations that the proposed thickness control method gives better performance than existing methods and has the robustness against the modeling error of the mill modulus as well.

• Structural Engineering and Mechanics
• /
• 제40권6호
• /
• pp.783-800
• /
• 2011

This paper addresses the finite strip formulations for the stability analysis of viscoelastic composite plates with variable thickness in the transverse direction, which are subjected to in-plane forces. While the finite strip method is fairly well-known in the buckling analysis, hitherto its direct application to the buckling of viscoelastic composite plates with variable thickness has not been investigated. The equations governing the stiffness and the geometry matrices of the composite plate are solved in the time domain using both the higher-order shear deformation theory and the method of effective moduli. These matrices are then assembled so that the global stiffness and geometry matrices of a moderately thick rectangular plate are formed which lead to an eigenvalue problem that is solved to determine the magnitude of critical buckling load for the viscoelastic plate. The accuracy of the proposed model is verified against the results which have been reported elsewhere whilst a comprehensive parametric study is presented to show the effects of viscoelasticity parameters, boundary conditions as well as combined bending and compression loads on the critical buckling load of thin and moderately thick viscoelastic composite plates.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.56-59
• /
• 1988

The main purpose of Set-up control of hot strip mill plant is to obtain the most regular thickness. Then the learning or adaptive computer control in hot strip rolling mill has been developed. But it is very difficult to keep the inter-stands load distribution ratio uniform; so that the deviation of strip flatness is not avoidable. This leads to the degradation of quality of the products. In this report, an improved method base on the steepest descent method including the computation of optimum step size. This method is applied to the off-line simulation. In consequence, the better balances of inter-stands load distribution is achieved in addition to improvements of output thickness of hot strip mill in POSCO.

• 한국강구조학회 논문집
• /
• 제13권1호
• /
• pp.41-52
• /
• 2001

본 연구에서는 복합재료로 구성된 구조물로서 박스거더와 같이 임의의 각도로 연결된 절판을 유한대판법으로 해석하였다. 각 적층판의 강성으로부터 적분에 의하여 판두께 방향의 전체 강성을 구하고 최소 포텐샬 에너지 이론으로부터 구한 평형방정식에 대입하여 전체 강성매트릭스를 구하였다. 슬래브나 박스거더의 변위 함수는 횡 방향의 Hermite 다항식과 종 방향의 조화함수의 결합으로 가정하였다. 종 방향 조화함수는 단부의 경계조건을 만족시키는 함수를 사용하였다. 해석시간의 단축 및 모델링이 쉽다는 장점을 가진 유한대판법은 복합적층 재료로 구성된 박스거더와 같은 절판해석의 경우에도 매우 정확한 해를 얻을 수 있다.