• Steel and Composite Structures
• /
• v.45 no.6
• /
• pp.839-850
• /
• 2022

This paper presents an analytical solution to study the combined effect of non-local and stretching effect on the vibration of advanced functionally graded (FG) nanoplates. A new quasi-3D plate theory is presented; there are only five unknowns and any shear correction factor is used. A new displacement field with a new shear warping function is proposed. The equilibrium equations of the FG nanoplates are obtained using the Hamilton principle and solved numerically using the Navier technique. The material properties of functionally graded nanoplates are presumed to change according to the power-law distribution of ceramic and metal constituents. The numerical results of this work are compared with those of other published results to indicate the accuracy and convergence of this theory. Hence, a profound parameterstudy is also performed to show the influence of many parameters of the functionally graded nanoplates on the free vibration responses is investigated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.359-360
• /
• 2021

The pixel-based processing of an image refers to a process of converting a value of one pixel only depending on the value of the current pixel, regardless of the value of another pixel. Pixel-based processing is used as the most basic operation in many fields such as image conversion, image enhancement, and image synthesis. There are processing methods such as arithmetic operation, histogram smoothing, and contrast stretching. In this paper, in order to clearly distinguish the tidal flat region from the tidal flat image of the west coast taken with a drone, we seek a method to find an efficient outline using pixel-based processing in the boundary detection part of the pre-processing process.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.2
• /
• pp.579-595
• /
• 2000

The purposes of this study were to compare pelvic tilt before and after manipulation of sacroiliac joint in 31 low back pain patients (11 males, 20 females) with sacroiliac joint dysfunction. The sacroiliac joint of patients was manipulated on the side of anterior pelvic tilt, using the technique described by Stoddard (1962) and Greenmann (1996). I used this technique because it usually eliminated sacroiliac joint dysfunction in one treatment session. SPSS for window computer system was used to analyze the data. Also t-test was performed for comparison of pelvic tilt angle before and after manipulation, and Pearson product-moment correlation analysis was performed for intratester reliability for measurements of pelvic tilt angle before and after manipulation. The result were as follows: 1. Intratester reliability was good for measures of pelvic tilt (r=.98). 2. The pelvic tilt after manipulation was significantly decreased (mean=$3.40^{\circ}$) compared with the pelvic tilt before manipulation (p=.001). All subjects showed asymmetrical right versus left pelvic tilt before manipulation. 40% of subjects showed decreased asymmetrical right versus left pelvic tilt after manipulation, and 60% of subjects showed symmetrical right versus left pelvic tilt after manipulation. I think that pelvic tilt asymmetry with hypomobility due to loss of joint play could be symmetrized by manipulation or mobilization, but pelvic tilt asymmetry with unilateral pelvic muscle shortening could not be symmetrized by manipulation or mobilization without relaxation and stretching of shortened muscles.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1262-1266
• /
• 2000

Objective : Flat back syndrome constitutes a syndrome complex characterized by the loss of normal lumbar lordosis. Various techniques of correction for flat back syndrome have been reported. Posterior extension osteotomy has certain drawbacks. Forceful hyperextension of the spine may result in vascular complications such as rupture of the aorta or the inferior vena cava and stretching of superior mesenteric artery, and pseudoarthrosis. We describe a rationale and technique of transvertebral posterior extension osteotomy to avoid complications of posterior extension osteotomy and to achieve an correction of 30 degrees of flat back syndrome. Method : A 63-year-old woman with degenerative lumbar kyphosis presented with low back pain, thigh pain, knee pain and walking difficulty. Transpedicular fixation from L1 vertebra to S1 vertebra was accomplished for lumbar degenerative kyphosis. After 6 months, the patient presented with flat back syndrome. A second operation was performed with transvertebral posterior extension osteotomy. Result : With short segemental fusion, early bone fusion and correction of 30 degrees were achieved. Conclusion : Transvertebral posterior extension osteotomy provide an 30-60 degrees of correction of flat back syndrome. This technique is considered to be good method for the revision of lumbar degenerative kyphosis.

• Cartoon and Animation Studies
• /
• s.10
• /
• pp.107-120
• /
• 2006

The movement of characters in ceil animation is the art that gives the feeling of movement. The movement expressed naturally and well done makes the scene more dramatic and interesting. The history of 3D animation is not fully riped yet but it has shown powerful impact. The genre of 3D has come closer to us, yet it has given freshness and problems at the same time. One of the problems is the awkwardness of movement. Overplaying, stretching and squashing of character, was extremely difficult to accomplish using the prior technique of 3D so! ftware. It was not very effective so animators have avoided doing it. However, advanced technique of 3D software, so to speak, ‘stretch and squash’, overcomes the limitation of movement. The new form of character animation can be accomplished. The theme of this paper is about the analysis and comparison of ‘stretch and squash’ in cell and 3D animation.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.242-249
• /
• 1998

Stiffness of the elbow joint is relatively common after trauma, ectopic ossification, bum, postoperative scar, and etc. Mild flexion deformity can be reduced by use of active or passive motion exercise, dynamic sling, hinged distractor device, or turnbuckle orthosis. But these methods have disadvantages of difficulty in gaining acceptable range of motion only with stretching exercise, re-contracture after conservative managements and poor results that flexion contracture remained. The common described operative exposures for treatment of the stiff elbow are anterior, lateral, posterior, and medial approach. Through Anterior, lateral and medial approach each has not access to all compartments of the elbow. But, posterior approach has benefits that access to posterior, medial and lateral aspects of the elbow and as needed, fenestration to the olecranon fossa that produces a communication between the anterior and posterior compartments of the elbow are possible. From June 1991 through April 1997, 11 patients who had posttraumatic stiff elbow, were treated with debridement arthroplasty through the posterior approach. The purpose of this study are to introduce technique of the debridement arthroplasty and to evaluate final outcomes. With regarding to preoperative pain degree, mild degree matches to 3 cases, moderate to 3 cases, and severe to 2 cases. In preoperative motion, flexion was average 85° and extension was 30°. Postoperatively nine patients had got the complete relief of pain and two patients continued to have mild pain intermittentely. Postoperative flexion improved to 127° and extension to 2°, so that elbow flexion had improved by an average of 42° and elbow extension by 28°. On the objective scale all patients had good or excellent results and they all felt that they were improved by operation. Debridement arthroplasty is one of excellent procedures for the intractable stiff elbow if it is not unstable or it has not incongrous. But it need a meticulous operative technique and a well-programmed rehabilitation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.55-60
• /
• 2002

For the development of a new creep test technique, the availability of SP-Creep test is discussed for 1Cr-0.5Mo boiler header material. And some results are also compared with those of 2.25Cr- 1Mo steel which widely uses as boiler superheater tube. The results can be summarized as follows. The load exponents(n) obtained by SP-Creep test for 1Cr-0.5Mo steel are decreased with increasing creep temperature and the values are 15.67, 13.89, and 17.13 at 550$^{circ}C$ ,575$^{circ}C$ and 600$^{circ}C$, respectively. The temperature dependence of the load exponent is given by n = 107.19 - 0.1108T. This reason that load exponents show the extensive range of 10∼16 is attributed to the fine carbide such as M$_{23}$C$_{6}$ in lath tempered martensitic structures. At the same creep condition, the secondary creep rate of 1Cr-0.5Mo steel is lower than the 2.25Cr-1Mo steel1 due to the strengthening microstructure composed by normalizing and tempering treatments. Through a SEM observation, it can be summarized that the primary, secondary, and tertiary creep regions of SP-Creep specimen are corresponding to plastic bending, plastic membrane stretching, and plastic instability regions among the deformation behavior of four steps in SP test, respectively.y.

• Physical Therapy Korea
• /
• v.23 no.3
• /
• pp.29-39
• /
• 2016

Background: In the treatment of temporomandibular joint (TMJ) disorder, the goals of traditional physical therapy are not only to reduce the inflammatory process leading to pain, but also to decrease joint overload and muscle hyperactivity. To achieve those goals, physical therapists generally use a photo-therapy, joint mobilization, and massage. Objects: To examine the impact of an unloading technique using non-elastic taping on the pain, opening mouth, functional level, and quality of life in patients with TMJ disorder. Method: Twenty patients with TMJ disorder were included in this study and randomly divided into the experimental ($n_1$=10), and control ($n_2$=10) groups. Traditional physical therapy including massage and stretching for 30 min was performed in both groups. Non-elastic taping was performed in the experimental group after traditional physical therapy, and they were recommended to keep the tape attached for 12 hours. Outcomes for pain, functional level, and quality of life were measured using a survey. The opening mouth was measured using a general ruler. Result: Significant differences were observed in the pain level, opening mouth, functional level, and quality of life after the intervention and on follow-up in both groups. However, we found that while the levels of all parameters were maintained throughout the follow-up period in the experimental group, the functional status level was not maintained throughout the follow-up period in the control group. Conclusion: Our unloading technique using non-elastic tape results comparable to those achieved by traditional physical therapy in the treatment of TMJ. However, the unloading taping method using non-elastic tape is more effective than traditional physical therapy in maintaining the impact of intervention.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.353-369
• /
• 2022

This study attempts to shed light on the coupled impact of types of loading, thickness stretching, and types of variation of Winkler-Pasternak foundations on the flexural behavior of simply- supported FG plates according to the new quasi-3D high order shear deformation theory, including integral terms. A new function sheep is used in the present work. In particular, both Winkler and Pasternak layers are non-uniform and vary along the plate length direction. In addition, the interaction between the loading type and the variation of Winkler-Pasternak foundation parameters is considered and involved in the governing equilibrium equations. Using the virtual displacement principle and Navier's solution technique, the numerical results of non-dimensional stresses and displacements are computed. Finally, the non-dimensional formulas' results are validated with the existing literature, and excellent agreement is detected between the results. More importantly, several complementary parametric studies with the effect of various geometric and material factors are examined. The present analytical model is suitable for investigating the bending of simply-supported FGM plates for special technical engineering applications.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.4
• /
• pp.369-379
• /
• 2011

Purpose : The purpose of this study is to compare the initial effect of nerve mobilization (NM), static stretching (SS), and contract-relax (CR) techniques to find the best method in improving hamstring flexibility and gait function in patients with hemiplegia. Methods : Eleven patients with hemiplegia were included in this study. Passive knee extension (PKE) range of motion and the sit and reach (SR) test were used to measure hamstring flexibility, while timed up and go (TUG) and the 10m walking (10MW) test were used to measure the subject's gait. Measurements on each test were assessed prior to the experiment, immediately following the experiment, and 30 minutes after the experiment. Analysis of the results utilized a repeated measures analysis of variance to examine hamstring flexibility and the difference in walking ability. Results : The results suggest significant increases in NM, SS, and CR techniques as they relate to hamstring flexibility (p<.05) following (both immediate and 30 minutes post experiment) PKE range of motion and the SR test, but post-hoc showed no significant difference between the three techniques (p>.05). Additionally, the results suggest significant increases in NM, SS, and CR techniques as they relate to gait function (p<.05) following the TUG test, but found no significant difference in the 10MW test (p>.05). Post-hoc analysis between the three techniques suggests that only the NM technique significantly changed gait function. The time of TUG and 10MW test showed no significant difference between the three techniques before an experiment, just after an experiment, and 30 minutes following the experiment according to the measurement points in time (p>.05). Conclusion : This study suggests NM, SS, and CR techniques immediately improve hamstring length and flexibility while improving gait function in patients with hemiplegia.