• 제목/요약/키워드: Stretch rate

검색결과 80건 처리시간 0.024초

수면 무호흡증 관리를 위한 섬유센서 기반의 슬립 모니터링 스마트 웨어 개발에 관한 연구 (A Study on the Development of Sleep Monitoring Smart Wear based on Fiber Sensor for the Management of Sleep Apnea)

  • 박진희;김주용
    • 감성과학
    • /
    • 제22권1호
    • /
    • pp.89-100
    • /
    • 2019
  • 본 연구에서는 수면무호흡증이 다양한 합병증을 유발하는 질병으로서, 이를 위한 표준화된 수면다원검사가 고가이며 측정이 불편함을 고려하여, 환자가 익숙한 환경에서 검사를 받을 수 있도록 스트레치 섬유센서를 이용한 무구속 상태의 웨어러블 모니터링 시스템을 개발하고자 한다. 또한, 의복과 일체화된 디자인으로 제품화하여 그 유용성을 제안하고자 한다. 성인 남성용 롱 슬리브 티셔츠 형태로 착용형 수면무호흡 모니터링 스마트 의류를 개발하여, 수면무호흡 진단 지표 중 섬유형 센서를 기반으로 측정하는 호흡수(breathing rate)측정용 섬유센서, 산소포화도(oxygen saturation), 호흡기류(airflow)를 실시간 측정하였다. 최적의 조합비 샘플 4가지를 통한 gauge factor를 측정한 결과, gauge factor 20.3을 확인하였고, 3회 숨을 크게 내쉴 때 호흡유량이 최대 2048ml였다. 산소포화도 69.45%로 최소 측정 가능 산소포화도 70% 정도의 결과를 나타내었다. 세탁 후 인장에 따른 센서 성능 평가 결과는 전체적으로 gauge factor 18 수준의 값으로, 세탁에 대한 내구성이 입증되었다. 본 연구를 통하여 수면무호흡증 환자의 수면효율이 떨어지고 여러 합병증을 동반하는 문제에 대해, 가정에서 쉽게 사용할 수 있는 착용형 수면무호흡 모니터링 스마트 의류를 개발하여 호흡수, 호흡유량, 산소포화도의 3가지 지표를 측정 가능함을 확인하였다.

휴대용 심전도 기기와 직물형 전극을 이용한 생체정보 측정용 밀착 의복 개발 (Development of Tight-Fitting Garments with a Portable ECG Monitor to Measure Vital Signs)

  • 정연희;김승환;양영모
    • 한국의류학회지
    • /
    • 제34권1호
    • /
    • pp.112-125
    • /
    • 2010
  • A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.

부상화염에서 화염 곡률반경 특성에 관한 연구 (A Study on the Flame Curvature Characteristics in a Lifted Flame)

  • 하지수;김태권;박정;김경호
    • 한국가스학회지
    • /
    • 제14권2호
    • /
    • pp.34-39
    • /
    • 2010
  • 삼지화염의 화염안정화 메커니즘 중 중요한 한 가지는 화염전파속도이다. 화염전파속도의 정량적인 규명을 위해 Bilger는 층류 유동이론에 근거하여 혼합분율 기울기에 비선형적으로 연관된 삼지화염 전파속도를 실험으로 제시하였다. 그러나 지금까지의 연구에서는 화염의 곡률에 따른 삼지화염 전파속도에 관하여 논의된 바가 없기에, 본 논문에서 화염의 곡률에 따른 화염전파속도의 연관성을 제시하고자 하였다. 본 논문의 결과로 층류부상화염의 부상높이가 연료의 출구속도와 노즐의 직경에 따라서 결정됨을 알 수 있었다. 그리고 정지된 부상화염의 유동속도에 비례하는 연료의 출구속도에 곡률의 크기가 비례함을 보였고, 또 층류부상화염의 부상높이가 높아질수록 곡률반경의 크기가 커짐을 알 수 있었다. 따라서 곡률효과의 중요성이 인식되어야 하며 화염안정화 메커니즘을 표현하기 위해 제안된 Bilger의 제안식이 곡률효과를 고려하여 수정되어야한다.

무릎 안전성 향상을 위한 컴프레션 의복의 기능적 디자인 영역 선정과 설계법 (Selection and Design of Functional Area of Compression Garment for Improvement in Knee Protection)

  • 이효정;김남임;홍경희;이예진
    • 한국생활과학회지
    • /
    • 제24권1호
    • /
    • pp.97-109
    • /
    • 2015
  • Recently, because the market for compression wear now includes all consumers, not just professionals, various items for recovery after exercising or for enhanced effects from exercise have been introduced. In this research, a systematic and stepwise design process was proposed to develop compression garment that has both functional area and appropriate pressure to protect the knee when exercising. The U-V format functional area that wraps underneath the knee was selected by considering the shape and change in the skin length when bending the knee. After the selection of the functional area, a total of seven knee design areas, including the existing product, were designed to determine the appropriate pressure. After various movements, the compression garment was ranked in terms of support of the knee, level of pressure, discomfort of seam line, and comfort of popliteal; the preferred design was selected using the quad method. Four compression wear garments were produced using two selected preferred designs; the wear evaluation was performed using a seven-point Likert scale. As a result, the optimal reduction rate of the pattern was calculated based on Ziegert and Keil's method. The applied percentage of the fabric stretch at the upper part of the crotch was 66% for the width and 50% for the length; for the lower part of the crotch, only 66% for the width was applied. Moreover, it was determined that the design of the U-V knee protection part was preferred when a 7 mm square was placed at a 1 mm distance because this not only supports the knee but also allows the fabric to accommodate various skin deformations.

고장력강의 구멍 확장 실험을 이용한 자동차부품 설계연구 (A Study of Automobile Product Design using Hole Expansion Testing of High Strength Steels)

  • 박병철;배경운;구선모;장승현;홍성훈;김영석
    • 소성∙가공
    • /
    • 제19권6호
    • /
    • pp.337-343
    • /
    • 2010
  • Current need of weight reduction in automotive part increases the application for high strength steel (HSS). The various types of high strength steels have been used to produce chassis part, control arms and trailing arms for weight reduction and increasing of fatigue durability such as dual phase steel (DP) and ferrite bainite steel (FB). But, DP and FB steels have proven to show inferiority in durability as well as press formability. Edge cracking occurred often in flange forming and hole expansion processes is the major failure encountered. This paper discussed the behavior of edge stretchability of high strength steel of DP and FB steels. Experimental works have been conducted to study the effect of punch clearance and burr direction on hole expansion ratio (HER). Also finite element simulation (FEM) has been preformed to clarify the mechanism of flange crack and support the experimental results on HER of DP and FB steels. It was simulated the whole process of blanking process following by hole expansion process and ductile fracture criterion named the modified Cockcroft-Latham model which was used to capture the fracture initiation. From the hole expansion tests and FEM simulation studies it was concluded that ferrite bainite steel showed better stretch-flangeability than dual phase steel. It was attributed to the lower work hardening rate of ferrite bainite steel than dual phase steel at the sheared edge.

구간과속단속시스템의 도입 방안 연구 (The Enforcement Scheme of the Overspeeding vehicle by Travel Speed)

  • 한원섭;김만배;현철승;유성준
    • 대한교통학회지
    • /
    • 제23권1호
    • /
    • pp.21-32
    • /
    • 2005
  • 현행 무인교통단속장비는 특정한 지점에서의 위반 여부를 판단하여 단속하는 특징을 갖고 있어 운전자들이 시스템 설치 지점 앞에서만 속도를 줄이고 통과하자마자 다시 속도를 증가시키는 경향을 보이고 있다. 특히 터널, 교량 및 커브 구간에서의 사고 위험도는 다른 구간에 비해 높은 것으로 분석되고 있다. 따라서 일정구간에 걸쳐 도로나 교통여건으로 과속교통사고의 위험이 높거나 과속사고가 많이 발생되는 도로구간에서 안정적인 속도관리를 위해 구간과속단속시스템의 도입이 필요하다고 판단된다. 본 연구에서는 터널, 교량 구간의 교통류 특성을 분석하여 기존 지점과단속시스템의 한계를 분석하였다. 그리고 구간과속단속시스템을 적용하기 위한 도로구간의 적정거리를 현장 도로구조, 교통여건, 사고발생 내용을 검토하여 제시하였다. 또한 각 교량이나 터널에 대하여 적절한 구간과속단속시스템의 설치 위치를 제시하였다.

도시 거주 여성 노인의 비만 유무에 따른 신체구성, 상⋅하지 근력 및 신체활동 능력 분석 (Analysis of Body Composition and Functional Physical Performance in Urban-Dwelling Elderly Women with or without Obesity)

  • 최승준
    • PNF and Movement
    • /
    • 제19권3호
    • /
    • pp.331-340
    • /
    • 2021
  • Purpose: The purpose of this study was to investigate the differences in body composition, upper and lower limb muscle strength, and functional physical ability in urban-dwelling elderly women with or without obesity. Methods: All study participants were assigned to the normal weight group (n=8, BMI<25) and the obesity group (n=7, BMI>25) based on their obesity rate. Anthropometric measurement was conducted and body composition was measured. For the upper and lower limb strength, grip strength and maximal isometric knee extension and flexion were evaluated by a dynamometer. The senior fitness test was performed to measure functional ability. Data analysis was conducted by the independent t-test and the alpha level was set at 0.05. Results: The waist, hips, and thighs of obese elderly women were thicker than those of normal-weight elderly women. This physical difference resulted from body fat mass, not muscle mass. Despite a similar level of limb muscle mass between the two groups, the upper limb grip strength was higher (24.00% for left, 19.95% for right) in the normal-weight women than the obese women (p<0.05), but otherwise there was no difference in maximal knee flexion or extension isometric strength. Functional physical ability showed no difference in a 30-second chair sit and stand test and a six-minute walk test, but a 30-second arm-curl (11.00% for left, 14.81% for right), back stretch (8.54cm for left, 8.99cm for right), chair sit and reach (9.22cm for left, 6.24cm for right), and 2.44 meter round trip walk (0.62 sec, 9.39%) were faster in performance for normal-weight elderly women than obese elderly women (p<0.05). Conclusion: Taken together, despite similar levels of upper and lower extremity muscle mass, normal-weight elderly women showed higher performance in upper limb strength, flexibility, and agility than obese elderly women, but there was no difference in lower extremity functional muscle strength and cardiopulmonary endurance.

상호작용 하는 H2-공기/CO-공기 예혼합화염에 미치는 H2 선호 확산 영향에 대한 수치적 연구 (Numerical Study on H2 Preferential Diffusion Effect in Downstream Interactions between Premixed H2-air and CO-air Flames)

  • 정용호;박정;권오붕;길상인;윤진한
    • 한국연소학회지
    • /
    • 제18권4호
    • /
    • pp.37-43
    • /
    • 2013
  • The effects of preferential diffusion of hydrogen in interacting counterflow $H_2$-air and CO-air premixed flames were investigated numerically. The global strain rate was varied in the range $30-5917s^{-1}$, where the upper bound of this range corresponds to the flame-stretch limit. Preferential diffusion of hydrogen was studied by comparing flame structures for a mixed average diffusivity with those where the diffusivities of H, $H_2$ and $N_2$ were assumed to be equal. Flame stability diagrams are presented, which show the mapping of the limits of the concentrations of $H_2$ and CO as a function of the strain rate. The main oxidation route for CO is $CO+O_2{\rightarrow}CO_2+O$, which is characterized by relatively slow chemical kinetics; however, a much faster route, namely $CO+OH{\rightarrow}CO_2+H$, can be significant, provided that hydrogen from the $H_2$-air flame is penetrated and then participates in the CO-oxidation. This modifies the flame characteristics in the downstream interaction between the $H_2$-air and CO-air flames, and can cause the interaction characteristics at the rich and lean extinction boundaries not to depend on the Lewis number of the deficient reactant, but rather to depend on chemical interaction between the two flames. Such anomalous behaviors include a partial opening of the upper lean extinction boundary in the interaction between a lean $H_2$-air flame and a lean CO-air flame, as well as the formation of two islands of flame sustainability in a partially premixed configuration with a rich $H_2$-air flame and a lean CO-air flame. At large strain rates, there are two islands where the flame can survive, depending on the nature of the interaction between the two flames. Furthermore, the preferential diffusion of hydrogen extends both the lean and the rich extinction boundaries.

세척조건에 스판덱스사의 길이와 기계적 성질에 미치는 영향 (The Effect of Washing Conditions on the Dimension and Mechanical Properties of Spandex Yarns)

  • 정혜원;김미경
    • 한국의류학회지
    • /
    • 제29권12호
    • /
    • pp.1619-1626
    • /
    • 2005
  • 탄성직물의 내구성은 탄성직물에 포함된 스판덱스사의 성질변화가 큰 영향을 미친다. 그러므로 본 연구에서는 세탁조건이 스판덱스사의 길이, 강도와 신도, $300\%$신장 후의 영구탄성 변화에 미치는 영향을 조사하였다. 시료로는 굵기가 다른 스판덱스사와 heat-set 시 신장률이 다른 편성물을 가정용 드림세탁기에서 세탁온도, 세탁 전 침지시간과 세탁휫수를 달리하여 세탁한 후, 편성물로부터 스판덱스사를 분리하여 기계적 성질을 측정하였다 스판덱스사의 길이는 세탁온도가 높아지거나, $40\%$에서 세탁휫수가 증가하면 계속 감소하였으나 세탁 전 침지시간에 따른 영향은 비교적 적었다 섬유가 가늘수록 길이 수축률이 크며 세척 조건변화에 따른 수축률이 크게 증가하였다. 스판덱스사의 강도와 신도는 반복 세척 시의 감소가 뚜렷하였으며, heat-set 시에는 강도와 신도도 크게 감소하였고, heat-set 시에 가해준 신장률이 클수록 감소가 더 컸다. 한편 스판덱스사의 영구변형률은 세탁온도가 높으며, 침지시간이 길고, 세탁횟수가 많을 때 현저히 높았다. 대체적으로 굵은 스판덱스사의 영구변형률이 크며, 140D는 30회 세척 후에 $28.0\%$의 영구변형 이 일어났다. Heat-set로 스판덱스사의 영구변형은 늘어나며, heat-set 시에 신장률이 큰 스판덱스사의 영구변형이 더 많았다. DSC 열분석 곡선에서 스판덱스 섬유는 반복 세탁과 heat-set여부와 관계없이 동일한 융해온도를 나타내었으며, 이로부터 스판덱스 섬유의 hard segment분자쇄 길이는 세탁 또는 heat-set후에도 변화가 없는 것으로 보여진다.

결장루형성술 환자 간호를 위한 일 연구

  • 모경빈
    • 대한간호학회지
    • /
    • 제1권1호
    • /
    • pp.27-43
    • /
    • 1970
  • This study is designed to find out proper nursing activities for the needs of the colostomy patients, i.e., mental and psychological as well as physical needs for rapid recovery, and to help them build up the follow-up care for proper social adjustment. The study is based on 268 cases out of 381 colostomy patient's records kept in Ewha Womans University Hospital, Yonsei Medical Center, and National Medical Center in between the period from Jan. 1953 to Jan. 1970. The items of study are mainly on etiology, sex, age, duration of hospitalization, mortality rate, seasonal frequency, time from the onset of illness to the admission of the hospital, signs and symptoms. 1. Frequency of onset by etiology: Neoplastic disease 112 cases (42%), Inflammatory disease 33 cases (12%), Congenital malformation 30 cases (11%), Intussusception 25 cases (9.3%), Trauma 24 cases (9%), Volvulus 17 cases (6.3%), and Crohn's disease 6 cases (2.2%). 2. By sex: male 167 cases (62.9%), and female 101 cases (37.1%). So the ratio of portion of male and female 2:1. 3. By age: under 1·year·old 27 cases (10.1%) highest, 41-50 yrs 54 cases (20.2%), 51-60 yrs 42 cases (15.5%), above 71 yrs 5 cases (1.9%). 4. Duration of hospitalization: the shortest is 2-days and the longest is 470 days. 1-20-days 52%, 40-60 days 14%. 5. Mortality rate: Under the 10-days-admission 19.5%, and the beyond 30-days-admission 3.9%. 6. Seasonal frequency: Higher in summer (32% ). 7. Signs and symptoms: abdominal pain (56%), abdominal distention (54%), vomiting (40%), bloody mucoid diarrhea (38%) , pain of anal region (18%), abdominal tenderness, anorexia, indigestion, constipation, disuria, tenesmus, high fever and chilling sensation, bile tingled vomiting. Nursing activities for the patient's physical needs are as follows: Skin care for colostomy region, Prevention of colostomy constriction and depression, Removal of an offensive odor, The use of colostomy bag-selection for, and demonstration of the use of inexpensive colostomy irrigation equipment, Personal hygiene, general skin care, care of hair, finger nails and toe-nails, Oral hygiene, sleep and rest, aquate, Daily activities, etc. Measures for regulation of bowl movement. Keeping the instruction of taking food, Preparing the meal and help for anorexia, Constipation and it's solution, Prevention of diarrhea, helping the removal of mucous, and stretch constricted steam as needed. Nursing activities for pt's socio-psychological needs are as follows; Help the patient to make decision for the operation, Remove pt's anxiety toward operation and anesthesia, To meet the pt's spiritual needs at his death bed, Help to establish family and friends cooperation, Help to reduce anxiety at the time of admission and it's solution, Help to meet religious need, Help to remove pt's anxiety for loosing his job and family maintenance, Follow-up studies for 7 cases have been done to implement the present thesis. The items of the personal interviews with the patients are as follows: Acceptability for artificial anus, The most anxious thing they had in mind at the time of discharge, The most anxious thing they hat·e in mind at present, Their friends and family's attitudes toward the patient after operation, Relations with other colostomy patients, Emotional damage from the operation, Physical problem of enema, irrigation, Control of diet, Skin care, Control of offensive odor, Patient's suggestions to nurses during hospital stay and after discharge. In conclusion, the follow-up care for colostomy patients shares equal weight or perhaps more than the post-operative care. The follow-up care should include the spiritual care for moral support of the patient, to drag him out of isolation and estrangement, and make him fully participate in social activities. It is suggested that the following measures would help to rehabilitate the colostomy patients (1) mutual acquaintance with other colostomy patients if possible form a sort of club for the colostomy patient to exchange their experiences in care (2) through the team work of doctor, nurse and rehabilitation specialists, to have a sort of concerted effort for betterment of the patient.

  • PDF