• 대한토목학회논문집
• /
• 제28권3D호
• /
• pp.331-338
• /
• 2008

도로 포장은 다양한 재료에 의한 층구조로 되어 있으며 하중 재하시 포장구조체의 거동은 보조기층에 사용된 재료의 성질에 매우 민감하다. 따라서 포장 설계는 재료적 성질의 측정 방법과 정확도에 의해 그 적합성이 좌우되며, 층재료에 대한 현실적인 묘사가 요구된다. 회복탄성계수($M_R$)는 도로 하부구조 재료를 나타내는 물성치로 널리 사용되고 있다. 본 연구에서는 국내에서 사용되는 보조기층 재료의 역학적 거동특성에 관한 자료를 수집하고, 이를 분석하여 정규화된 모델을 통해 $M_R$ 값을 얻을 수 있는 구성방정식을 도출하였다. 또한 도출된 구성방정식을 적용한 유한요소해석 결과와 실측값과의 비교를 통해 본 연구에서 제안한 해석모델의 적절성을 검증하였다.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.85-93
• /
• 2009

본 논문은 콘크리트의 크리프 현상에 대한 보다 단순하고 합리적인 유변학적 모델을 구성하고, 크리프 예측 모델 개발에 대한 하나의 방법론을 제시하는 데에 일차적인 목표가 있다. 장기적인 응력에 의한 콘크리트의 변형은 발생 메커니즘과 시간 의존성 여부에 따라 즉각적인 탄성 변형과 시간 의존적 단기 크리프, 시간 독립적 단기 크리프, 장기 크리프의 합으로 볼 수 있으며, 이들 변형을 모사하기 위해 6개의 매개변수를 갖는 유변학 모델을 구성하였다. 각 매개변수의 구성에는 미세 프리스트레스 고체화 이론과 기존 설계기준을 활용하였고, 이론적 접근이 어려운 경우에 한해 수치적 접근을 시도하였다. 수립된 모델의 검증은 실제 실험 데이터를 사용하였고, 기존 모델 및 설계식과 비교 평가하여 그 합리성을 확인하였다.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.23-34
• /
• 2012

본 연구에서는 인장강도 800MPa급 고강도강재(HSA800)의 단주 중심압축실험과 편심압축실험을 통해 균등압축과 휨-압축 부재의 강도를 평가하여 현행 강구조기준(KBC2009, AISC2005)의 적용성 여부를 검토하였다. 또한 잔류응력의 계측을 통하여 강재 항복강도와 잔류응력과의 상관성 여부도 검토하였다. 고강도강재와 일반강재의 국부좌굴 거동 차이의 여부를 확인하기 위하여 중심압축실험에 SM490 강재로 제작된 비교실험체도 포함시켰다. 강도로 무차원화한 판폭두께비와 판 단부의 지지조건을 주요변수로 하여 실험을 실시하였다. 편심압축실험은 HSA800 강재만을 대상으로 하였으며, 휨-압축의 조합력을 받는 부재의 P-M 상관관계를 알아보기 위해 가력 편심거리를 조정하여 다양한 P-M 조합에 대해 강도평가 실험을 수행하였다. 잔류응력은 중심압축실험에 사용된 H형단면 실험체를 대상으로 비파괴실험법인 압입법에 의해 가력 이전에 그 크기와 분포를 측정하였다. 실험결과 중심압축을 받는 모든 HSA800 단주는 판 단부의 지지조건 및 판폭두께비 조건에 따른 현행 강구조기준의 설계강도를 충분히 발휘하였다. 편심압축을 받는 실험체 역시 현행 설계기준의 P-M 상관관계를 충분히 안전측으로 충족하였다. 본 연구에서도 잔류응력의 크기는 강재의 항복강도와 무관하다는 선행연구결과와 합치하는 잔류응력 측정값이 얻어졌다.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.543-552
• /
• 1994

본 연구는 공중낙하법으로 만든 공기건조 상태의 일본의 표준사인 풍포사(豊浦砂)(Toyoura sand)와 영국의 표준사인 Silver Leighton Buzzard sand 공시체를 배수상태에서 평면 변형율 압축시험을 실시하여, 구속압이 모래의 변형 강도특성에 미치는 영향을 조사하였다. 축방향 변위와 수평방향의 변위는 변형율수준(strain level) $10^{-6}$에서 파괴상태까지를 연속적으로 구할 수 있는 장치를 사용하여 정도 높게 측정함으로써 미소변형에서 파괴상태까지의 응력 변형율 특성을 상세히 연구하였다. 그 결과, 극저구속압에서는 구속압이 작아져도 내부마찰각 ${\sigma}^{\prime}{_{max}}=arcsin\{({\sigma}{_1}^{\prime}-{\sigma}{_3}^{\prime})/({\sigma}{_1}^{\prime}+{\sigma}{_3}^{\prime})\}_{max}$가 급격히 크게 되지는 않아, Bolton의 경험식을 사용할 시는 어느 정도 구속압이 클 때만 적용 가능하다는 것을 알았다. 또, 모래의 강성률은 근사적으로 구속압의 m승에 비례하는데(G or $E{\propto}{\sigma}{_3}^{{\prime}m}$), 이때 m은 변형율수준 $10^{-4}$이하에서는 약 0.4 정도이고 변형율=$10^{-1}$에서는 $m{\fallingdotseq}0.9$ 정도이었다. 이러한 경향은 모래의 종류, 혹은 시험종류에 따라 거의 변화하지 않음을 알았다. 이것은 구속압이 작을수록 강성률의 변형율수준 의존성, 응력수준 의존성이 크게 되는 것과 대응한다. 끝으로, Rowe의 응력-다이러턴시 관계는 미소 변형율수준($10^{-4}$ 이하)에서 파괴까지 거의 직선적으로 성립하고, 구속압의 영향을 거의 받지 않는다는 것을 알았다.

• 농업과학연구
• /
• 제22권1호
• /
• pp.103-109
• /
• 1995

단백질과 전분을 각 성분비로 조합하고, 고형물 함량 8, 9, 10, 11%로 조정한 시료를 $80^{\circ}C$에서 30분간 가열한 후 $25^{\circ}C$로 냉각하여, 온도 $30{\sim}60^{\circ}C$, 0.6 ~ 6 rpm의 범위에서 Brookfield 단원통회전점도계로 리올로지 특성을 측정하였는 바, 아래와 같은 결과를 얻었다. 1. 모델 식품 $P_1S_3$, $P_1S_2$, $P_1S_1$, $P_2S_1$, $P_3S_1$, $P_4S_0$는 모두 의가소성을 나타내고, 항복치를 가지며, 시간 의존성 구조 붕괴를 나타내는 thixotropic 식품이었다. 그러나 $P_0S_4$, 즉 전분의 경우는 8~11% 범위에서 gel의 강도가 크기 때문에 유동성을 보이지 않았다. 2. 각 수분함량에서 모형식품의 단백질 함량에 따른 유통 특성값은 일정한 상관관계를 나타내지 않았다. 3. 전단속도에 대한 전단웅력의 변화는 전분질식품이 ($P_1S_3$, $P_1S_2$) 단백질식품($P_2S_1$, $P_3S_1$)보다 컸으며, 전단초기의 구조붕괴는 Tiu의 모델에 따라 2차 반응식으로 붕괴되었고, 전단속도가 증가 할 수록 구조 붕괴 속도도 빨랐다. 4. $P_1S_2$, $P_2S_1$의 온도의존성은 Arrhenius식에 잘 따랐으며 이때 활성화에너지는 각각 2.35, $1.34Kcal/g{\cdot}mole$이었다.

• 한국해안·해양공학회논문집
• /
• 제32권1호
• /
• pp.17-25
• /
• 2020

본 연구에서는 1 MW급 수평축 조류발전기의 출력 및 유동특성을 분석하기 위해 3차원 레이놀즈 평균 나비어-스톡스 해석을 수행하였다. 난류해석을 위해 SST(shear stress transport) 난류모델을 사용하였고, 유동해석을 위한 계산영역은 육면체격자로 구성하였으며, 최적의 격자 크기를 결정하기 위하여 격자 의존성 시험을 수행하였다. 터빈의 노즈 형상 및 유입각도, 그리고 타워 구조물의 영향을 분석하였다. 노즈 형상의 경우 노즈의 직경 대비 축방향 길이의 비가 증가할수록 터빈 출력이 향상되는 결과를 확인할 수 있었고, 유입각도가 약 15° 이상에서는 터빈의 성능이 약 10% 이상 감소하는 것을 확인하였다. 또한 타워 구조물에 의하여 하류식 터빈의 경우 상류식 터빈에 비하여 성능이 1% 감소함을 알 수 있었다.

• 대한물리치료과학회지
• /
• 제4권2호
• /
• pp.439-452
• /
• 1997

Mothers of handicapped children experience many problems and difficulties related to the child's prolonged dependency and demands for special care. Social support can be identified as stress-relieving factor, social support is considered to decrease the amount of negativeness in an individual or family. This study attempted to identify the level of burden and social support in mothers of children who are handicapped, and to determine whether social support is an effective strategy for burden relief in these mothers. The method used in the study was a correlational descriptive survey using a questionnaire. The subjects for the study were 42 mothers who have the handicapped children, between two to twelve years of age, being treated at S General Welfare House for Handicapped and S Rehabilitation Center in Seoul. The data were collected during 1 month from March 20 to April 20, 1996. The instruments used for this study was a structured questionnaire which was the Burden scale developed by Suh Mihae and Oh Kasil(1993) and the PRQ(Personal Resource Questionnaire) scale developed by Brandt & Weinert(1981). The collected data were analyzed using the SPSS computer program, yielding frequencies, percentiles, means, standard deviations, $x^{2}$-test, Pearson's correlation coefficienct, t-test and ANOVA. The results of this study are as follows ; 1)The range of age in the subjects was $29{\sim}44$ years, the range age in the handicapped children was $2{\sim}12$ years. 2) The mean score of burden, for the mothers of the handicapped children was 2.75(standard deviation was 0.47) of a possible total of 5. 3) The mean score of social support, for the mothers of the handicapped children was 4.99 (standard deviation was 0.59) of a possible total of 7. 4) There was an negative correlations hip between burden level and the social support, but there was no statistically significant correlationship between burden level and the social support(r = -.2252, p = .076) 5) In the general characteristics influencing on the burden level was significantly related with the sex(t = - 2.87, p = .007) and the degree of child's handicap level(F = 11.8680, p = .000l). In the general characteristics influencing on the social support was significantly related with the family(husband) support(F = 3.5199, p = .0240). There were significant differences in the mother's levels of burden depending upon the severity of child's handicap. In other words, the degree of mother's burden was directly proportionate to the degree of child's handicap level. There were significant differences in the mother's levels of social support depending upon the family(husband) support. In conclusion, on the basis of the results of this study, there was no statistically significant correlationship between burden level and the social support. Above results suggest that strategies for the intervention programs in diminishing the mother's burden and reinforcing the social support.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.20-20
• /
• 2017

Plant genomes include heterochromatic loci that consist of repetitive sequences and transposable elements. LTR retrotransposon is the major class of transposons in advanced plants in terms of proportion in plant genome. The elements contribute not only to genome size but also to genome stability and gene expression. A number of cases have been reported transposon insertions near genic regions affect crop traits such as fruit pigments, stress tolerance, and yields. Functional LTR retrotransposons produce extrachromosomal DNA from genomic RNA by reverse transcription that takes place within virus-like-particles (VLPs). DECREASED DNA METHYLATION 1 (DDM1) plays important roles in maintaining DNA methylation of heterochromatin affecting all sequence contexts, CG, CHG, and CHH. Previous studies showed that ddm1 mutant exhibits massive transcription of retrotransposons in Arabidopsis, but only few of them were able to create new insertions into the genome. RNA-dependent RNA POLYMERASE 6 (RDR6) is known to function in restricting accumulation of transposon RNA by processing the transcripts into 21-22 nt epigenetically activated small interfering RNA (easiRNA). We purified VLPs and sequence cDNA to identify functional LTR retrotransposons in Arabidopsis ddm1 and ddm1rdr6 plants. Over 20 LTR copia and gypsy families were detected in ddm1 and ddm1rdr6 sequencing libraries and most of them were not reported for mobility. In ddm1rdr6, short fragments of ATHILA gypsy elements were detected. It suggests easiRNAs might regulate reverse transcription steps. The highest enriched element among transposon loci was previously characterized EVADE element. It has been reported that active EVADE element is more efficiently silenced through female germline than male germline. By genetic analyses, we found ddm1 and rdr6 mutation affect maternal silencing of active EVADE elements. DDM1-GFP protein accumulated in megaspore mother cell but was not found in mature egg cell. The fusion protein was also found in early embryo and maternal DDM1-GFP allele was more dominantly expressed in the embryo. We observed localization of DDM1-GFP in Arabidopsis and DDM1-YFP in maize and found the proteins accumulated in dividing zone of root tips. Currently we are looking at cell cycle dependency of DDM1 expression using maize system. Among 10 AGO proteins in Arabidopsis, AGO9 is specifically expressed in egg cell and shoot meristematic cells. In addition, mutation of AGO9 and RDR6 caused failure in maternal silencing, implying 21-22 nt easiRNA pathway is important for retrotransposon silencing in female gametophyte or/and early embryo. On the other hand, canonical 24 nt sRNA-directed DNA methylation (RdDM) pathways did not contribute to maternal silencing as confirmed by this study. Heat-activated LTR retrotransposon, ONSEN, was not silenced by DDM1 but the silencing mechanisms require RdDM pathways in somatic cells. We will propose distinct mechanisms of LTR retrotransposons in germline and somatic stages.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.97-97
• /
• 2017

Plant genomes include heterochromatic loci that consist of repetitive sequences and transposable elements. LTR retrotransposon is the major class of transposons in advanced plants in terms of proportion in plant genome. The elements contribute not only to genome size but also to genome stability and gene expression. A number of cases have been reported transposon insertions near genic regions affect crop traits such as fruit pigments, stress tolerance, and yields. Functional LTR retrotransposons produce extrachromosomal DNA from genomic RNA by reverse transcription that takes place within virus-like-particles (VLPs). DECREASED DNA METHYLATION 1 (DDM1) plays important roles in maintaining DNA methylation of heterochromatin affecting all sequence contexts, CG, CHG, and CHH. Previous studies showed that ddm1 mutant exhibits massive transcription of retrotransposons in Arabidopsis, but only few of them were able to create new insertions into the genome. RNA-dependent RNA POLYMERASE 6 (RDR6) is known to function in restricting accumulation of transposon RNA by processing the transcripts into 21-22 nt epigenetically activated small interfering RNA (easiRNA). We purified VLPs and sequence cDNA to identify functional LTR retrotransposons in Arabidopsis ddm1 and ddm1rdr6 plants. Over 20 LTR copia and gypsy families were detected in ddm1 and ddm1rdr6 sequencing libraries and most of them were not reported for mobility. In ddm1rdr6, short fragments of ATHILA gypsy elements were detected. It suggests easiRNAs might regulate reverse transcription steps. The highest enriched element among transposon loci was previously characterized EVADE element. It has been reported that active EVADE element is more efficiently silenced through female germline than male germline. By genetic analyses, we found ddm1 and rdr6 mutation affect maternal silencing of active EVADE elements. DDM1-GFP protein accumulated in megaspore mother cell but was not found in mature egg cell. The fusion protein was also found in early embryo and maternal DDM1-GFP allele was more dominantly expressed in the embryo. We observed localization of DDM1-GFP in Arabidopsis and DDM1-YFP in maize and found the proteins accumulated in dividing zone of root tips. Currently we are looking at cell cycle dependency of DDM1 expression using maize system. Among 10 AGO proteins in Arabidopsis, AGO9 is specifically expressed in egg cell and shoot meristematic cells. In addition, mutation of AGO9 and RDR6 caused failure in maternal silencing, implying 21-22 nt easiRNA pathway is important for retrotransposon silencing in female gametophyte or/and early embryo. On the other hand, canonical 24 nt sRNA-directed DNA methylation (RdDM) pathways did not contribute to maternal silencing as confirmed by this study. Heat-activated LTR retrotransposon, ONSEN, was not silenced by DDM1 but the silencing mechanisms require RdDM pathways in somatic cells. We will propose distinct mechanisms of LTR retrotransposons in germline and somatic stages.

• 한국농공학회지
• /
• 제35권4호
• /
• pp.55-66
• /
• 1993

Upon freezing a soil swells due to phase change and its compression stress increase a lot. As the soil undergo thawing, however, it becomes a soft soil layer because the 'soil changes from a solid state to a plastic state. These changes are largely dependent on freezing temperature and repeated freezing-thawing cycle as well as the density of the soil and applied loading condition. This study was initiated to describe the effect of the freezing temperature and repeated freezing-thawing cycle on the unconfined compressive strength. Soil samples were collected at about 20 sites where soil structures were installed in Kangwon provincial area and necessary laboratory tests were conducted. The results could be used to help manage effectively the field structures and can be used as a basic data for designing and constructing new projects in the future. The results were as follows ; 1. Unconfined compressive strength decreased as the number of freezing and thawing cycle went up. But the strength increased as compression speed, water content and temperature decreased. The largest effect on the strength was observed at the first freezing and thawing cycle. 2. Compression strain went up with the increase of deformation speed, and was largely influenced by the number of the freezing-thawing cycle. 3. Secant modulus was responded sensitivefy to the material of the loading plates, increased with decrease of temperature down to - -10$^{\circ}$C, but was nearly constant below the temperature. Thixotropic ratio characteristic became large as compression strain got smaller and was significantly larger in the controlled soil than in the soil treated with freezing and thawing processes 4. Vertical compression strength of ice crystal(development direction) was 3 to 4 times larger than that of perpendicular to the crystal. The vertical compression strength was agreed well with Clausius-Clapeyrons equation when temperature were between 0 to 5C$^{\circ}$, but the strength below - 5$^{\circ}$C were different from the equation and showed a strong dependency on temperature and deformation speed. When the skew was less then 20 degrees, the vertical compression strength was gradually decreased but when the skew was higher than that, the strength became nearly constant. Almost all samples showed ductile failure. As considered above, strength reduction of the soil due to cyclic freezing-thawing prosses must be considered when trenching and cutting the soil to construct soil structures if the soil is likely subject to the processes. Especially, if a soil no freezing-thawing history, cares for the strength reduction must be given before any design or construction works begin. It is suggested that special design and construction techniques for the strength reduction be developed.