DOI QR코드

DOI QR Code

A Rheological Approach on Prediction of Concrete Creep

콘크리트 크리프 예측을 위한 유변학적 접근

  • 권기연 (포항산업과학연구원 강구조연구소) ;
  • 민경환 (고려대학교 건축.사회환경공학과) ;
  • 김율희 (고려대학교 건축.사회환경공학과) ;
  • 윤영수 (고려대학교 건축.사회환경공학과)
  • Received : 2008.07.01
  • Accepted : 2009.01.13
  • Published : 2009.01.31

Abstract

The primary objective of this study is to construct more simple and reasonable rheological model and propose a methodology for predicting a phenomenon of concrete creep. Deformations of concrete under sustained stress can be expressed by the sum of immediately elastic deformation, time-dependent and time-independent short-term creep, and long-term creep according to the mechanism and time-dependency. To simulate these deformations, a rheological model having six parameters was constructed. In the composing of each parameter, the microprestress-solidification theory and design model code were incorporated together with the numerical approach for the components which can not be theoretically approached. Finally, actual test data were applied in the verification of the proposed model, and suitability of the model was confirmed by comparisons with existing predicting models and design codes.

본 논문은 콘크리트의 크리프 현상에 대한 보다 단순하고 합리적인 유변학적 모델을 구성하고, 크리프 예측 모델 개발에 대한 하나의 방법론을 제시하는 데에 일차적인 목표가 있다. 장기적인 응력에 의한 콘크리트의 변형은 발생 메커니즘과 시간 의존성 여부에 따라 즉각적인 탄성 변형과 시간 의존적 단기 크리프, 시간 독립적 단기 크리프, 장기 크리프의 합으로 볼 수 있으며, 이들 변형을 모사하기 위해 6개의 매개변수를 갖는 유변학 모델을 구성하였다. 각 매개변수의 구성에는 미세 프리스트레스 고체화 이론과 기존 설계기준을 활용하였고, 이론적 접근이 어려운 경우에 한해 수치적 접근을 시도하였다. 수립된 모델의 검증은 실제 실험 데이터를 사용하였고, 기존 모델 및 설계식과 비교 평가하여 그 합리성을 확인하였다.

Keywords

References

  1. 강창구(1995) 콘크리트변형과 파괴. 원기술, pp. 173-184.
  2. 김성욱, 고경택, 송영철, 박효선(2005) 콘크리트 구조물의 건조수축과 크리프 예측기술. 한국콘크리트학회지, 한국콘크리트학회, 제17권, 4호, pp. 25-33.
  3. 김재기, 이만섭, 이주하, 윤영수(2003) 국내 FCM교량에 사용되는 고성능 콘크리트의 크리프에 관한 유동학적 모델. 2003년도 가을 학술발표회 논문집, 한국콘크리트학회, Vol. 15, No. 2, pp. 433-436.
  4. 윤영수(2008) 철근콘크리트 역학 및 설계. 도서출판 새론, pp. 39-45.
  5. 이창수, 김현겸(2006) 콘크리트 크리프 변형 예측을 위한 비선형 4-매개변수 모델의 제안. 대한토목학회 논문집, 대한토목학회, 제26권, 제1A호, pp. 45-54.
  6. 日本土木學會 (1996) コンクリト 標準示方書 (平成 8年版), 設計編, pp. 26-32.
  7. AASHTO (2007) AASHTO LRFD Bridge Design Specification 2007.
  8. ACI Committee 209 (2008) Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures, ACI 209R-92, ACI Manual of Concrete Practice.
  9. Bazant, Z.P. and Baweja, S. (2000) Creep and shrinkage prediction model for analysis and design of concrete structures: model B3, ACI Special Publication, Vol. 194, pp. 1-84.
  10. Bažant, Z.P., Hauggaard, A.B., Baweja, S., and Ulm, F.-J. (1997) Microprestress-solidification theory for concrete creep. I: aging and drying effects, Journal of Engineering Mechanics, Vol. 123, No. 11, pp. 1188-1194. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:11(1188)
  11. Bazant, Z.P., Hauggaard, A.B., and Baweja, S. (1997) Microprestress-Solidification theory for concrete creep. II: algorithm and verification, Journal of Engineering Mechanics, Vol. 123, No. 11, pp. 1195-1201. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:11(1195)
  12. FIB (1999) CEB-FIP Model Code 90 for Concrete Structures, Structural Concrete, Vol. I, Federation Internationale du Beton, Switzerland.
  13. Gardener, N.J. and Lockman, M.J. (2001) Design provision for drying shrinkage and creep of normal-strength concrete, ACI Material Journal, Vol.98, No.2, pp.159-167.
  14. Jirasek, M. and Bazant, Z.P. (2002) Inelastic Analysis of Structures John Wiley & Sons, Ltd., Chichester, England, pp. 555-570, 665-670.
  15. Shames, I.H. and Cozzarelli, F.A. (1992) Elastic and Inelastic Stress Analysis. Prentice-Hall, Inc., Simon & Schuster Company, Englewood Cliffs, NJ, pp. 162-172, 212-220.
  16. Ulm, F.J., Maou, F.L., and Boulay, C. (2000) Creep and shrinkage of concrete-kinetics approach, ACI Special Publication, Vol. 194, pp. 135-154.