• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.4
• /
• pp.426-435
• /
• 2005

The lightness of components required in automobile and machinery industries is requiring high strength of components. Therefore this requirement is accomplished as the process of shot-peening method that the compressive residual stress is made on the metal surface as one of various improvement methods. Special research is, therefore, needed about compressive residual stress on the metal surface in the process of shot-peening method. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in environmental condition(temperature) and mechanical condition(shot velocity, stress ratio) was investigated with considering fracture mechanics. By using the methods mentioned above, the following conclusions have been drawn. (1) The fatigue crack growth rate(da/dN) of the shot-peened material was lower than that of the un-peened one. In high temperature range. fatigue crack growth rate decreased with increasing temperature range, while fatigue crack growth rate increased by decreasing temperature in low temperature. (2) Fatigue life shows more improvement in the shot-peened material than in the un-peened material. And compressive residual stress of surface on the shot-peen processed operate resistance force of fatigue crack propagation.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.299-307
• /
• 2007

We collected data of hydraulic fracturing tests and overcoring tests conducted in 84 boreholes in the south-east Korea in order to analyze the contemporary state of stress in this region. The average direction of the maximum horizontal stress was determined to be $N66^{\circ}{\pm}31^{\circ}E$. The relative magnitudes of the three principal stresses was ${\sigma}_v$ (vertical stress) < ${\sigma}_h$ (minimum horizontal stress) < ${\sigma}_H$ (maximum horizontal stress), indicating thrust fault stress regime. The stress ratio K (horizontal stress/vertical stress) was relatively high (2.2

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.185-192
• /
• 2003

This study consolidation undrain Triaxial Compression Tests using constant confining pressure in clay that receive preconsolidation stress that is different and, void ratio, pore water pressure coefficient, shear strength compare with another thing theory and studied analyzing change relation of elastic modules. The summary of analysis is follows: If preconsolidation stress increases in same confining stress in relation of preconsolidation stress and deviator stress, deviator stress is proportional and increased. Can know that excess void pressure is proportional and decreases in size of preconsolidation stress in same confining stress state if preconsolidation stress increases preconsolidation stress and relation of excess void pressure. Also, over consolidated state can assume that this is thing by Dilatancy's effect though excess void pressure decreased remarkably. Preconsolidation stress and relation of stress path can know that shear strength degree increases preconsolidation stress increases, and specially, preconsolidation stress was appear in stress path form of overconsolidated state case of clay that receive at 300, 400, 500kPa in 100, 150kPa's deviator stress.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.155-162
• /
• 1995

Redistribution of residual stress and its effects during fatigue crack propagates from tensile residual stress region in weldment are investigated. Tests are performed by using welded CCT specimens of structual rolling steel (SS400) and it makes fatigue crack propagate from tensile residual stress region. For this study tension-tension loading type is selected by external loading condition and magnetizing stress indicator is used correctly to measure redistribution of residual stress according to fatigue crack growth and number of loading cycles. From this result, it is proved that redistribution of residual stress is mainly consist of residual stress released by fatigue crack growth. When fatigue crack propagates from tensile residual stress region residual stress are redistributed and it makes fatigue crack growth rate largely increase. Fatigue crack growth rate is low in case of redistributed residual stress compare with initial distributed residual stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.932-938
• /
• 2002

In structural applications, brittle materials such as soda-lime glasses and ceramics are usually subjected to multiaxial stress state. Brittle materials with cracks or damage by foreign object impacts are apt to fracture abruptly from cracks, because of their properities of very high strength and low fracture toughness. But in most cases, the residual strength of structural members with damage has been tested under uniaxial stress condition such as the 4-point bend test. Depending upon the crack pattern developed, the strength under multiaxial stress state might be different from the one under uniaxial. A comparative study was carried out to investigate the influence of stress state on the residual strength evaluation. In comparable tests, the residual strength under biaxial stress state by the ball-on-ring test was greater than that under the uniaxial one by the 4-point bend test, when a small size indendation crack was introduced. In the case that crack having an angle of 90deg. to the applied stress direction, the ratio of biaxial to uniaxial flexure strength was about 1.12. The residual strength was different from crack angles to loading direction when it was evaluated by the 4-point bend test. The ratio of residual strength of 45deg. crack to 90deg. one was about 1.20. In the case of specimen cracked by a spherical impact, it was shown that an overall decrease in flexure strength with increasing impact velocity, and the critical impact velocity for formation of a radial and/or cone crack was about 30m/s. In those cases that relatively large cracks were developed as compared with the case of indented cracks, the ratio of residual strength under biaxial stress state to one uniaxial became small.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.677-686
• /
• 2004

This study deals with literature review, developing a predicting equation for the ultimate stress of internal and external prestressing steel, and an experimental test with the parameters affecting the ultimate stress of prestressing steel in prestressed concrete beams strengthened by external prestressing tendons. The proposed predicting equation takes rationally the effect of internal and external prestressing steels into consideration as a function of prestressing steel depth to neutral depth ratio. In the experimental study, prestressed concrete beams strengthened using external steel tendons are tested with the test parameters having a large effect on the ultimate stress of internal and external prestressing steel. The test parameters include internal and external prestressing steel reinforcement ratio and span to depth ratio. The test results are analyzed to confirm the rationality and applicability of the proposed equation for predicting the ultimate stress of internal and external prestressing steel. This research shows that the results obtained by the proposed equation for predicting the ultimate stress agreed very well with the test results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1904-1911
• /
• 1999

The most effective material in the shape memory alloy(SMA) is the TiNi alloy, because its shape recovery characteristics are very excellent. We molded the composite material with shape memory function. The fiber of it is $Ti_{50}-Ni_{50}$ shape memory alloy and matrix of it is epoxy resin(Araldite B41, Hardner HT903. Ciba Geigy), its adhesive and optical sensitivity are very excellent. It was assured that the composite material could be used as model material of photoelastic experiment for intelligent materials or structures. In this research, the composite material with shape memory function is used as model material of photoelastic experiment. Photoelastic experimental hybrid method is developed in this research, it is assured that it is useful on the obtaining stress intensity factor and the separation of stress components from only isochromatic data. The measuring method of stress intensity factor of intelligent material by photoelastic experiment is introduced. In the mode I state, we can know that stress intensity factors are decreased more than 50% of stress intensity factor of room temperature when temperature of fiber is greater than 4$0^{\circ}C$, prestrain greater than 5% and fiber volume ratio greater than 0.42% and that stress intensity factors are decreased by 100% when fiber volume ratio is greater than 0.84%, prestrain greater than 5% and temperature greater than 60 $^{\circ}C$.

• Journal of Oriental Neuropsychiatry
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2011

Objectives : This study was conducted to assess effects of oriental medicine music therapy on heart rate variability(HRV) in normal subjects under mental stress. Methods : 34 healthy volunteers(control group:17, experimental group:17) participate in this study. The volunteers were randomly allocated into two groups. After 10-minutes rest period and instrumentation, both groups performed a mental stress test for 12-minutes. HRV was recorded before and after the mental stress. And then the experimental group applied oriental medicine music therapy for 10-minutes. In the control group, they rested for 10-minutes. And HRV was recorded. Results : After giving mental stress stimulation to both groups, LF and LF/HF ratio were significantly increased and HF, mean HRV were decreased. In experimental group, LF, LF/HF ratio were significantly decreased and HF, SDNN were significantly increased after applying oriental medicine music therapy. In control group, LF was significantly decreased. And LF/HF ratio was decreased and HF, SDNN were increased, but it was not significant. Conclusions : This results show that oriental medicine music therapy could be relatively useful to decrease sympathetic activity and prevent the alteration of autonomic nervous system due to mental stress.

• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.181-186
• /
• 2016

Three Echinochloa species inhabit various crop fields with different soil moisture conditions. Therefore, a growthpouch test was conducted to investigate adaptive diversity of six Echinochloa species, three from Korea and three from USA, toosmotic stress by assessing shoot and root growths. Echinochloa crus-galli var. praticola showed the greatest tolerance to osmoticstress in both root ($GR_{50}=1316.3g\;PEG\;L^{-1}$) and shoot ($GR_{50}=212.2g\;PEG\;L^{-1}$) growths, while Korean E. oryzicola was mostsensitive to osmotic stress in both root ($GR_{50}=116g\;PEG\;L^{-1}$) and shoot ($GR_{50}=126.2g\;PEG\;L^{-1}$) growths. Root to shoot (R/S) ratioof Echinochloa crus-galli var. praticola increased with increasing osmotic stress, while that of Korean E. oryzicola decreased, suggestingthat R/S ratio is closely related to osmotic stress tolerance in Echinochloa species. Our results clearly demonstrate that E. crus-galli var.praticola maintains high R/S ratio even under high osmotic stress, which enables this species to well adapt to dry upland condition. Incontrast, while E. oryzicola fails to maintain sufficiently high R/S ratio, resulting in poor adaptability to dry upland condition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.389-392
• /
• 2006

In this study, I examined hardening and non-hardening of the DFRCC (Ductile Fiber Reinforced Cementitious Composites) according to sand-aggregate ratio and the diameter of PVA fiber to develope PVA fiber reinforced concrete with the feature of DFRCC. As a result of this study, the fresh properties of DFRC is similar regardless of sand-aggregate ratio. The bending stress of DFRC also increased as the sand-aggregate ratio increased. And the bending stress-displacement was the most stable when the PVA $100{\mu}m$ was used regardless of sand-aggregate ratio.