• 대한한방내과학회지
• /
• 제37권2호
• /
• pp.361-367
• /
• 2016

Objective: This clinical study reports on the effect of traditional Korean medicine on a patient with generalized anxiety disorder.Method: A patient who suffered from generalized anxiety disorder was treated with herbal medicine (Guibiondamtang-gami), acupuncture, moxibustion, and pharmacopuncture. We assessed the changes of anxiety-related symptoms with the state-trait anxiety inventory (STAI) score, the Beck anxiety inventory (BAI) score, a heart rate variability (HRV) test, and a second derivative of photoplethymogram waveform (SDPTG) test.Results: After taking Guibiondamtang-gami for 22 days, the patient’s STAI score, BAI score, and LF/HF (low-frequency/high-frequency heart rate variability) ratio decreased, while the differential pulse wave index and stress power in the SDPTG test increased.Conclusion: This clinical case study has demonstrated that traditional Korean medicine may be an effective option for treating generalized anxiety disorder.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.153-158
• /
• 2004

The coupling phenomenon between stress and magnetic induction, known as magnetostriction, has been successfully applied to generate and measure elastic waves. Most applications of this phenomenon thus far, however, are rather limited to cylindrical ferromagnetic waveguides. The main objective of this work is to develop a new patch-type, orientation-adjustable magnetostrictive transducer that is applicable for non-cylindrical, non-ferromagnetic waveguides. The existing patch-type transducer consisting of a ferromagnetic patch and a racetrack coil is useful to generate elastic waves only in one specific direction once the patch is bonded to a test specimen. However, the proposed transducer can transmit and receive elastic waves in any direction only with one patch at a given location. The proposed magnetostrictive transducer consists of a circular nickel patch, a figure-of-eight coil, and a couple of bias permanent magnets. Because of the unique configuration of the transducer, the propagating direction of the generated waves can be freely controlled since the set of bias magnets and the coil is not bonded to the magnetostrictive patch. In this work, the characteristics of the proposed transducer were investigated experimentally.

• 비파괴검사학회지
• /
• 제23권2호
• /
• pp.107-115
• /
• 2003

지중식 LNG 저장 탱크의 지중연속벽(슬러리 벽체)의 시공 품질 및 건전성을 평가하기 위하여 비파괴 진단을 수행하였다. 이를 위하여 지중 연속벽의 9군데 측점을 선정하여 각각의 측점에서 탄성파 충격-공진법으로 벽체의 두께를 측정하였고, GPR을 사용하여 철근의 배치 간격을 조사하였다. 또한, 음속과 반발경도를 측정하여 압축강도를 추정하였다. 그 결과로 벽체의 두께는 150cm 이상으로 설계값을 만족하고 있으며, 철근의 배근 간격도 설계값과 잘 일치하였다. 콘크리트의 압축강도 추정값은 기준값보다 훨씬 크게 나타나서 전체적으로 구조물의 시공 품질은 양호한 것으로 판단된다.

• 열처리공학회지
• /
• 제31권1호
• /
• pp.18-23
• /
• 2018

In this study, low cyclic fatigue test was carried out at room temperature condition for rolled STS304 steel. The results of this study show that rolled STS304 steel has excellent static tensile strength and fatigue characteristics. The relationship between plastic strain range and fatigue life was examined using the triangular wave in order to predict the low cycle fatigue life of rolled STS304 steel by Coffin-Manson equation. Cyclic behavior of rolled STS304 steel was characterized by cyclic hardening with increasing number of cycle through the Hysteresis loop analysis and cyclic response of maximum stress versus number of cycles. It is found that the plastic deformation energy consumed per cycle is reduced by calculating the area of the hysteresis loop.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권7호
• /
• pp.331-337
• /
• 2001

With the increasing reliability of analysis schemes and the dramatically increased calculating speed, the computer simulation has become and indispensable process to predict the interruption capacity of circuit breakers. Generally, circuit breakers have to possess both the small current and large current interruption abilities and the circuit breaker designers need to evaluate its capacities to save the time and the expense. The analysis of small current and the large current interruption performances have been considered separately because the phenomena occurring in a interrupter are quite different. To analyze the dielectric recovery after large current interruption many physical phenomena such as heat transfer, convection and arc radiation, the nozzle ablation, the ionization of high temperature SF(sub)6 gas, the electric and themagnetic forces and so forth mush be considered. However, in the analysis of small current interruption performance only the cold gas flow analysis needs to be carried out because the capacitive current is to small that the influence from the current can be neglected. In this paper, an empirical equation which is obtained from a series of tests to estimate the dielectric recovery strength has been applied to a real circuit breaker. The results of analysis have been compared with the test results and the reliability has been investigated.

• 한국철도학회논문집
• /
• 제14권5호
• /
• pp.398-403
• /
• 2011

균열이 용접부 내와 같은 잔류응력의 영향을 받는 곳에 존재할 경우, 균열은 닫힘균열로 존재할 수 있으며, 인장과 압축에 대하여 비대칭적인 거동을 보이게 된다. 이러한 비선형 균열에 대하여 균열면에서 발생하는 고조파를 이용한 초음파 탐지 기법이 활발히 연구되고 있다. 본 연구에서는 비선형 접촉면에서 발생하는 고조파에 대한 파라미터 연구를 수행하였다. 본 연구는 일반적인 3차원 균열로 나아가기 위한 기초연구의 성격을 띄고 있다. 압축과 인장에 대해 각기 다른 선형 거동을 나타내는 접촉면을 가정하였고 1차원 문제를 고려하였다. 기본주파수 성분에 대한 2차고조파 성분의 비를 다양한 강성비, 입사파의 주파수, 접촉면의 두께에 대하여 조사 하였다.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.48-56
• /
• 2001

In this paper, this study aims at the evaluation on the characteristics of CFRP laminate plates using a falling weight impact tester. The experiment was conducted on several laminates of different orientation. A system was built far measur- ing the impact strength of CFRP laminates in consideration of stress wave propagation theory using a falling weight impact tester. Delamination areas of impacted specimens for the different ply orientation were measured with ultrasonic C- scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having flour interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy oft hybrid specimen containing a GFRP layer was higher than that of normal specimens.

• 한국해안해양공학회지
• /
• 제15권2호
• /
• pp.127-137
• /
• 2003

연안역 개발로 인해 갯벌의 면적이 급감하고 있는 현실에서 대체 갯벌의 조성을 위해 연구가 진행되고 있다. 본 연구는 인공갯벌 조성을 위한 연구사업의 일환으로, 자연적으로 형성된 갯벌지반과 인위적으로 조성된 갯벌지반의 지반공학적인 특성을 비교$.$고찰하고 그 결과를 토대로 인공갯벌 지반의 안정성을 평가하기 위하여 교란 및 불교란시료를 이용한 각종 실내실험을 실시하였다. 실내실험에서 측정된 전단강도와 조류와 파랑으로 인해 유발되는 전단응력을 비교하여 갯벌에 퇴적된 토사의 안정성에 대해 검토하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.39-46
• /
• 2016

A high frequency hydraulic rock drill drifter with sleeve valve is developed to use on arm of excavator. In order to ensure optimal working parameters of impact system for the new hydraulic rock drill drifter controlled by sleeve valve, the performance test system is built using the arm and the hydraulic source of excavator. The evaluation indexes are gained through measurement of working pressure, supply oil flow and stress wave. The relations of working parameters to impact system performance are analyzed. The result demonstrates that the maximum impact energy of the drill drifter is 98.34J with impact frequency of 71HZ. Optimal pressure of YZ45 rock drill is 12.8 MPa-13.6MPa, in which the energy efficiency reaches above 58.6%, and feature moment of energy distribution is more than 0.650.

• Korean Chemical Engineering Research
• /
• 제52권5호
• /
• pp.558-563
• /
• 2014

고분자 전해질 연료전지의 성능과 내구성에 미치는 막 전극 접합체(MEA) 제조방법의 영향에 대해 연구하기 위해 닥터 블레이드 방법, 스프레이 방법, 스크린 프린트 방법 그리고 스크린 프린트+스프레이 방법에 의해 MEA를 제조하였다. 제조된 MEA를 체결한 단위전지의 성능을 측정해 각 MEA의 초기 성능을 비교하였다. 10초간 0.6V 일정전압 유지 후 0.9 V에서 10초간 유지하는 전극 열화 가속 시험(AST)을 각 MEA 적용해 내구성을 시험하였다. 전극 열화 가속 시험 6,000 사이클 전 후 I-V 곡선, 임피던스, 순환 전압측정법(CV), 선형쓸음 전기량측정법(LSV), 투과전자현미경(TEM) 등을 측정하였다. 닥터 블레이드 방법에 의해 제조한 MEA의 초기 성능이 제일 높았고, 스크린 프린트+스프레이 방법에 의해 제조한 MEA가 제일 낮은 열화 속도를 보였다.