• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 가을 학술발표회 논문집
• /
• pp.81-88
• /
• 1998

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.34-41
• /
• 2006

A 3-dimensional stress measurement system based on the bore hole bottom deformation method, which is one of the stress relief methods, was developed. A pilot bore hole is drilled from the bottom of a bore hole and the stress meter is inserted into the pilot bore hole in the method. The bore hole is advanced as an over coring and the deformations in seven directions are measured by cantilever type-sensors. Using the cantilever type-sensors saves time for hardening of glue. No cable connection between the stress meter and a data logger is necessary since a compact data logger is installed in the stress meter. The accuracy of the stress meter was confirmed by a biaxial test for a Shikotsu welded tuff block although in-situ tests have not been carried out yet.

• 한국컴퓨터정보학회논문지
• /
• 제27권6호
• /
• pp.109-116
• /
• 2022

본 연구는 스트레스와 생리 변인(면역, 염증)을 검증하기 이전, 스트레스 대처와 대처방법을 연령대별 우울, 불안 증세를 분석하여 기초 자료 제공을 위한 pilot test를 실시하였다. 비대면 방법으로 BDI 및 STAI를 연령대별(20대~70대) 비대면조사와 대면조사를 병행, 추적조사로 실시하였다. 20대부터 60대에서 대처방법에 따라 스트레스 해소 후 유의한 저하를 보였고, 불안은 모든 연령대에서 스트레스 해소 후 유의한 저하를 보였으며, 50대는 운동에 의한 스트레스 대처가 스트레스 해소 후 제일 낮게 나타났다. 본 연구의 결과를 바탕으로 심리 변인에 따른 기초 연구를 통해 실제 스트레스 대처방법에 따른 생리적 변인을 추가 검증하여 높은 스트레스 수준을 보이는 대상을 모집단으로 장기간의 운동 처치를 통해 운동요법에 의해서 우울 및 불안증세 개선과 면역, 염증 반응과의 상관관계 등을 연령대별, 대상별 적합한 스트레스 대처방법을 추가적으로 검증해야 할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1125-1132
• /
• 2009

The theory and a probe of the pilot hole wall deformation method, which is a 3-dimensional stress measurement method based on the stress relief principle, were developed. A pilot hole is drilled from the bottom of a borehole and the stress measurement probe is inserted into the pilot hole. The borehole is advanced as the overcoring and the changes in the radius of the pilot hole in three directions and in the axial lengths between the borehole bottom and the pilot hole wall along four axial lines are measured by cantilever type-displacement sensors. The differences between the displacements by the elastic stress analysis and those measured by using the probe were within 3% in the uniaxial compression test of an acrylic resin plate having a hole.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권12호
• /
• pp.3943-3959
• /
• 2022

People are constantly exposed to stress and anxiety environment, which could contribute to a variety of psychological and physical health problems. Therefore, it is particularly important to identify psychological stress in time and to find a feasible and universal method of stress reduction. This research investigated the influence of different music, such as relaxation music and natural rhythm music, on stress relief based on Electroencephalogram signals. Mental arithmetic test was implemented to create a stressful environment. 23 participants performed the mental arithmetic test with and without music respectively, while their Electroencephalogram signal was recorded. The effect of music on stress relief was verified through stress test questionnaires, including Trait Anxiety Inventory (STAI-6) and Self-Stress Assessment. There was a significant change in the stress test questionnaire values with and without music according to paired t-test (p<0.01). Furthermore, a model based on Transformer for stress level classification from Electroencephalogram signal was proposed. Experimental results showed that the method of listening to relaxation music and natural rhythm music achieved the effect of reducing psychological stress and the proposed model yielded a promising accuracy in classifying the Electroencephalogram signal of mental stress.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.859-864
• /
• 2013

Creation of a stress relief groove is a fairly simple yet high-performance method. During the application of this method, it is important to consider the location and size of the groove in order to achieve better performance. Consequently, this research proposes an approach for optimizing the application of the stress relief groove method to a press-fitted assembly. In a boss design, the position and diameter of the groove are configured as design variables and the design of experiments is applied. Based on this information, a 3D model is built and analyzed using the finite element analysis software ABAQUS. Meta-models are created using back-propagation neural networks. Then, deterministic optimization results obtained from a genetic algorithm are compared with the results of the finite element analysis. The temperature sensitivity of the optimized model is analyzed, and finally, reliability-based design optimization is conducted for enhancing the design quality.

• 한국추진공학회지
• /
• 제1권1호
• /
• pp.104-110
• /
• 1997

고강도 알루미늄 합금 링롤재의 급냉, 링 팽창(expansion) 및 링 압축(compression) 응력제거처리 후 잔류응력을 예측하기 위하여 2차원 축대칭 열해석 및 탄소성 해석을 수행하였다. 급냉 및 응력제거처리 후 2단 과시효 처리(T73)된 링롤재에 대하여 3단계 절단법(Three step sectioning method)을 적용하여 링롤재의 두께에 따른 잔류응력 분포를 측정하였으며, 측정결과를 급냉 및 응력제거처리후 잔류응력 해석결과와 비교분석하였다. 링의 급냉후 원주 및 축방향의 잔류응력 해석값은 T73후 측정값과 비슷한 경향을 보였으며, 링의 내면과 외면에서 압축응력을 나타내었고 중심에서 인장응력을 나타내었다. 잔류응력은 링 팽창(T7351) 및 링 압축(T7352) 적용후 T73에 비해 현저히 감소하였으며, 축방향의 제거 효과가 원주방향보다 우수하게 나타났다. 또한 링 압축에 의한 제거효과가 링 팽창보다 크게 나타났다. 링롤재의 응력제거처리는 제거 효과 및 실용성 측면에서 링 압축 공정이 유리하며, 치수제어 및 장비용량 측면에서 링 팽창 공정이 유리하다는 결론을 얻었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.482-487
• /
• 1993

A prediction method for determining the welding residual stress by artificial neural network is proposed. A three-dimensional transient thermomechanical analysis has been performed for the CO $_{2}$ Arc Welding using the finite element method. The validity of the above results is demonstrated by experimental elastic stress relief method which is called Holl Drilling Method. The first part of numarical analysis performs a three-dimensional transient heat transfer anslysis, and the second part then uses results of the first part and performs a three-dimensional transient thermo-clasto-plastic analysis to compute transient and residual stresses in the weld. Data from the finite element method were used to train a backpropagation neural network to predict residual stress. Architecturally, the finite element method were used to train a backpropagation voltage and the current, a hidden layer to accommodate failure mechanism mapping, and an output layer for residual stress. The trained network was then applied to the prediction of residual stress in the four specimens. The results of predicted residual stress have been very encouraging.

• 여성건강간호학회지
• /
• 제18권3호
• /
• pp.170-179
• /
• 2012

Purpose: The purpose of this study was to identify menstrual distress, coping method and relief of symptoms among female nurses who worked with 3-shift. Methods: A total of 185 participants were recruited from November 18, 2011 to January 30, 2012. The measurement included menstrual distress and coping method questionnaire and relief of symptoms. The data were analyzed using t-test, ANOVA, Pearson's correlation coefficients with SPSS 19.0 Results: The level of menstrual distress was moderate (mean 3.0), and there were significant differences in menstrual distress by age, education, stress, regularity of menstrual cycle. Among the coping methods, coping according to menstrual cycle specific was the most frequently used, followed by active recognizing coping, active behavioral coping, and avoidance coping. Among the degree of symptom relief, symptom relief score was the highest when used coping according to menstrual cycle specific. Menstrual distress was associated with stress, adequate amount of sleep, dysmenorrhea and number of coping method total. Conclusion: Nurses experienced moderate levels of menstrual distress and used various types of coping to relieve it. There is a need for hospital nurses to develop an effective nursing intervention to relieve the menstrual distress and utilize active coping methods.

• 한국강구조학회 논문집
• /
• 제25권5호
• /
• pp.451-461
• /
• 2013

강교량에는 외력에 대해 저항하는 부재의 좌굴 등의 변형을 구속시키기 위한 여러 상세부들이 존재한다. 이들 상세부는 상호 교차하는 부재들로 구성되고 제작의 용이성, 용접결함의 원천적 배제 및 응력집중을 완화시키기 위해 스켈럽을 이용해 왔다. 본 연구에서는 교차부에 발생되는 응력집중으로 상세범주 D등급 이하를 갖게 되는 강교량 상세부의 피로저항 능력을 상세범주 C등급 이상으로 개선시키는 방안으로 응력완화홀(SRH)을 제안하였다. 적절한 크기 및 위치의 SRH 효과를 확인하고 이를 강바닥판교의 U-rib와 가로보 교차부에 작용시켜 SRH에 의한 피로저항능력 개선 가능성을 확인하였다.