• Transactions of Materials Processing
• /
• v.26 no.5
• /
• pp.314-322
• /
• 2017

In the high-speed forming analysis, dynamic material properties considering a high strain rate are required. The split Hopkinson pressure bar (SHPB) experiment was performed for measuring dynamic material properties under high strain rate. The pulse shaping method was used to improve the accuracy of the SHPB experiment. A pulse shaper attached to the front of the incident bar was used for specimen dynamic stress equilibrium through stress wave control. Numerical analysis and SHPB test were performed to verify whether the pulse shaper affects the dynamic stress equilibrium in copper and Al6061 specimens. The results of SHPB test and numerical analysis show that the pulse shaper contributes to the dynamic stress equilibrium. Based on the improved stress equilibrium using a pulse shaper, the flow stress curves for copper and Al6061 materials were obtained at strain rates of 1344.4/sec and 1291.6/sec, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.4
• /
• pp.348-354
• /
• 2024

Nanocrystalline zirconium nitride (ZrN) coatings were deposited by mid-frequency direct current sputtering (mfMS) with varying pulsed plasma parameters such as pulse frequency and duty cycle to understand the effect of pulsed plasma on the microstructure, residual stress and mechanical properties. The results show that, with the increasing pulse frequency and decreasing duty cycle, the coating morphology changed from a porous columnar to a dense structure, with finer grains. Mid-frequency magnetron sputtered ZrN coatings with pulse frequency of 30 kHz showed the highest both nanoindentation hardness of 16.3 GPa, and elastic modulus of 214.4 GPa. In addition, Effect of pulse frequency on a residual stress and average crystal grain sizes was also investigated.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.3
• /
• pp.149-155
• /
• 2011

Residual stress relief by pulse magnetic treatment is attractive because the process is carried out at room temperature and magnetic fields that are easy to produce and control can be used. This study shows that strong pulse magnetic treatment can lead to stress relaxation of structural steels instead of a conventional heat treatment process. And it makes a comparative study about pulse magnetic treatment and tempering by using Larson-Miller equation. When the specimen was subjected to a pulse magnetic treatment process the residual stress in the specimen was reduced by about 13.8%. It could be compared with tempering at $200^{\circ}C$ for 2hours by using thermal effect of Larson-Miller equation. As a result, it is considered that the pulsed magnetic treatment have an effect of the stress relation by tempering at $200^{\circ}C$ for 2 hours.

• Journal of Environmental Science International
• /
• v.33 no.4
• /
• pp.249-256
• /
• 2024

This study aimed to verify the healing effect through brain and pulse wave analyses before and after a forest walk to the university students. Bio-signals of brain and pulse waves were measured using Omnifit Mindcare. After analyzing four brain wave items such as concentration and four pulse wave items such as heart health, it is identified that the stress level of university students was higher than that of the general public, and the brain stress level was approached to the normal range for 19 people with clear improvement. For pulse waves, a statistically significant decrease in sympathetic nerve activity (%) was confirmed. Although the slight fluctuations within the normal range were caused by short term and individual differences, it showed that the forest walking is partially effect on the relieving stress.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.701-710
• /
• 2017

In this study, the thermoelastic beam in modified couple stress theory due to laser source and heat flux is investigated. The beam are heated by a non-Guassian laser pulse and heat flux. The Euler Bernoulli beam theory and the Laplace transform technique are applied to solve the basic equations for coupled thermoelasticity. The simply-supported and isothermal boundary conditions are assumed for both ends of the beam. A general algorithm of the inverse Laplace transform is developed. The analytical results have been numerically analyzed with the help of MATLAB software. The numerically computed results for lateral deflection, thermal moment and axial stress due to laser source and heat flux have been presented graphically. Some comparisons have been shown in figures to estimate the effects of couple stress on the physical quantities. A particular case of interest is also derived. The study of laser-pulse find many applications in the field of biomedical, imaging processing, material processing and medicine with regard to diagnostics and therapy.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.6
• /
• pp.668-673
• /
• 2014

Cold and Heat pattern identification(CHPI) in traditional East Asian medicine(TEAM) is one of the major indicator to distinguish characteristics of disease and to determine treatment method. Basic parameters to determine CHPI include the pulse rate, respiration rate, and pulse power. Studies to associate physiological responses of human body by cold stress(CS) with CHPI in TEAM were rarely done so far. This study aims to explore the effects of cold stress on pulse signal via a feasibility study for three subjects and investigate some indices which can reflect autonomic nerve reaction(ANR). We measured radial pulse signals and respiration signal of the investigated subjects before the CS, during the CS which continues for 5 minutes, and immediately after the CS, respectively. Finally, we analyzed the pulse rate (P), respiration rate (R), pulse power, pulse depth, and pulse rate per respiration (P/R ratio). As a result, the P/R ratio showed a consistently decreasing tendency through the CS stimulation process, while other parameters behaved more complex and in subject-specific ways. It implies that, among candidate parameters, the P/R ratio is a simple but the most probable parameter that can be used as the ANR indicator. This result is also consistent with the theory in TEAM scripts, in which the P/R ratio is predicted to be a direct indicator for the CHPI. This pilot study shows that P/R ratio can be more appropriately associated with the ANR than heart rate or respiration rate alone. Extensive studies will be necessary to verify or confirm the P/R ratio as an appropriate and well defined parameter for ANR.

• The Korean Journal of Emergency Medical Services
• /
• v.21 no.2
• /
• pp.89-102
• /
• 2017

Purpose: The purpose of the study was to investigate the effects of subtraction meditation on perceived stress, self-efficacy, blood pressure, and pulse rate in paramedic students. Methods: A quasi-experimental study with non-equivalent comparison groups using pre and post-test design was performed. The experimental group consisted of 27 participants who attended the meditation program, and the control group consisted of 26 non-participants of the program. The data were analyzed using SPSS/WIN 24.0. Results: There were a statistically significant differences between the experimental group and the control group in perceived stress(t=2.301, p=.026), systolic pressure(F=18.531, p=.000), diastolic pressure(F=9.745, p=.003), and pulse rate(F=33.869, p=.000) between pretest and posttest results. Conclusion: The subtraction meditation program can help reduce perceived stress, systolic pressure, diastolic pressure, and pulse rate.

• Journal of Naturopathy
• /
• v.10 no.1
• /
• pp.33-41
• /
• 2021

Purposes: We studied whether forest bathing is effective in improving the stress of the human body. Therefore, we investigated changes in pulse rate, stress index, and autonomic nervous system after 2 hours of forest bathing on Jeju Samdasu Forest Methods : The study was conducted before and after forest bathing through heart rate variability and questionnaire. Results: After forest bathing, the average pulse rate of the experimental group was significantly increased. The stress index significantly decreased in the post-test in the experimental group. The cumulative stress, sympathetic activity (LF), parasympathetic activity (HF) change, and LF/HF ratio were slightly different from those of post-test in the experimental group, but were not statistically significant. In the survey of job stress average index and state characteristic anxiety index through questionnaire, it decreased significantly after forest bathing (p<.001). Conclusions: The Samdasu forest bathing has been proven effective in enhancing pulse and reducing stress, so it is evaluated that forest bathing is effective in promoting health.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.16 no.3
• /
• pp.11-22
• /
• 2012

Objectives: The aim of this study was to elucidate the relationship between pulse types measured by pulse analyzer and several factors including smoking, drinking alcohol, exercises etc. Methods: The subjects were 71 persons who were tested by oriental health examination. A self-reported questionnaire was used to gather age, smoking, drinking alcohol, exercise state and gender. The pulse types were measured by DMP 1000. The index of stress and fatigue were measured by SA 3000. We analyzed the frequency of pulse types according to gender, ages, smoking, drinking alcohol etc by chi-square test with SPSS ver. 19.0. Results: In the main pulse types, there were significant differences according to age(p<0.05) and marginal differences according to drinking alcohol(p<0.1). In the secondary pulse types, there were marginal differences according to exercise, ages. But there was no significant differences according to gender, smoking, body mass index (BMI), accelerated photoplethysmography (APG) feature, stress and fatigue. Conclusions: This study suggests that the pulse types are affected by drinking alcohol, ages, exercise.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.447-452
• /
• 2014

This paper presents the effects of pulse plasma parameters such as duty cycle and pulse frequency on the properties of TiAlN coatings deposited by asymmetric bipolar pulsed DC magnetron sputtering systems. The results show that, with decreasing duty cycle and increasing pulse frequency, the coating morphology changes from a columnar structure to a dense structure with finer grains. Pulsed sputtered TiAlN coatings showed higher hardness, higher residual stress, and smaller grain sizes than did DC prepared TiAlN coatings. Moreover, residual stress and nanoindentation hardness of pulsed sputtered TiAlN coatings increased with increasing pulse frequency. Meanwhile, the surface roughness decreased continuously with increasing pulsed DC frequency up to 50 kHz.